Search: co gas monitor

The GX4 is a smart, sophisticated gas monitor designed to keep your employees safe and your company compliant with breathing air safety standards.  Features as follows:

• Capable.  Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.  
  • Note:  Unit comes standard with the CO cartridge only. Cartridges never need calibrating and last up to 2 years.  Regular calibration checks to be performed by using the GVS / RPB GX4 Calibration Regulator Kit.
• Intelligent. Continuously logs real-time data such as gas concentration, air temperature, unit status, etc.
• Connected.  Utilize access to your company’s network or connect directly with your device using the built-in Wi-Fi Hotspot mode.
• Flexible.  Powered by either a 12 volt vehicle battery clips (using cable with battery clips) or by a rechargeable Lithium battery. 
• Safe.  Built-in 103db alarm demands attention when unit detects the contaminants above the programmed levels.  For the ultimate in safety, choose the version with RZ fittings.  The RZ fittings are designed to work only with GVS / RPB breathing air equipment and cannot be accidentally connected to shop nitrogen lines.  Note:  Using RZ fittings will require use of breathing air line and respirators with these fittings as well.
• Customizeable.  The following options are available:
  • GX4 Heavy Duty Field Case – protects your investment when your projects are remote.
  • GX4 Auxiliary Strobe Light / Alarm / Cable
• Can be surface or wall-mounted using the GX4® wall bracket – or mounted directly to an RPB® Radex Airline Filter.
• Genuine Product – Manufactured by GVS/RPB® and NIOSH approved with the Radex Breathing Air filter.

 AVAILABLE FOR RENTAL OR PURCHASE

Powerful Portable breathing air station with regulator

• 4 operators can use the one machine
• Not just a Carbon Monoxide monitor – this device actually removes CO, as well as odors, hydrocarbons, etc.
• Powered by two x 9 Volt batteries included
• Carbon Monoxide Monitors are normally mandated on most job sites

The Radex airline filter (aka canister filter) is the heart of the GVS / RPB breathing air system.  Features as follows:

• Advanced Filtration.  6-stage filtering removes oils, odors, moisture, and particulates from breathing air
• Durable.  Cast aluminum construction for lightweight durability on jobsites as well as in factories.
• Flexible.  Can be either floor or wall mounted using the included twist-and-lock bracket
• Customizable.  Comes with either 2-outlets (1 for an operator and 1 for the CO monitor) or 6 outlets.  And if you already have a 2-outlet version and need to upgrade to 6, this can be done with the Radex Six Outlet Upgrade Kit.
• Other included features.
  • 150 PSI safety pressure relief valve
  • Chicago 2-claw coupling inlet port
  • Quick Connect outlet ports
  • Brass manual drain tap
  • Pressure regulator to adjust outlet air pressure
  • Replaceable APF3100 filter element (lasts up to 3 months or 400 working hours)
• Options.
  • Auto Drain Unit.  Automatically drains moisture from Radex, helping to prevent premature failure to the filter element due to maintenance oversight.
  • Micro Mist Filter.  Further removes moisture and oil. Recommended if compressor has possible moisture or oil blow-by issues.  Reduces chance of oil contamination of CO monitor sensor.
  • Mainline Pre-Filter.  Extra support for particulate removal down to 0.15 microns and extends life of primary filter element. 

NOTE:  This unit does not filter or monitor carbon monoxide (CO).  It is designed to be used with the RPB GX4 Carbon Monoxide monitor.

The GX4 is an accurate and sensitive gas monitor which is fully NIOSH certified for the GVS / Nova family of respirators when paired with the Radex breathing air filtration system.

One unique feature that GX4 has is the factory-calibrated gas cartridge sensor system.  These cartridges do not require field calibration but due to their long life (up to 2 years), their calibration must be checked regularly (recommend once per month).

BlastOne offers various calibration-check packages, along with separate gases and related parts.  These include:

• Packages.  These come with the following:
  • The applicable flow regulator,
  • One bottle of Zero air, and
  • One bottle of the respective gas.
• Flow Regulators.  Separate calibration flow regulators are available in either the Carbon Monoxide type or the Hydrogen Sulfide type.
• Gases.  Standard canister bottles of calibration gas are available separately in the following types:
  • Zero Air
  • Carbon Monoxide 20 PPM
  • Hydrogen Sulfide 20 PPM

NOTE.  Calibration gas is considered HAZMAT for shipping purposes and cannot be shipped by overnight air.  Please allow enough delivery time for regular ground UPS shipment.

• Suits GX4 Gas Monitor
• Designed to keep the GX4 protect from the rigors of contractor treatment
• Includes bracket for mounting the GX4
• Weather tight to keep the rain off the electronics
• Sold Individually
• MFR # 08-424
• Genuine Parts – Manufactured by RPB Safety