Search: compressor

AVAILABLE FOR RENTAL OR PURCHASE

• 900 cfm Compressor is suitable for 2 blasters plus a spray pump
• PSI Range between 125-150psi
• Each compressor brand is different, so please request a quote.

AVAILABLE FOR RENTAL OR PURCHASE

• 170HP T4 John Deere Diesel
• 2367 CFM, 28″ static pressure
• Mounted on 2-axle road legal trailer
• Will convey between 7-11 tons of abrasive per hour
• Primary Filtration – Coated Bags, pulse air cleaned
• Secondary Filtration – Pleated Cartridge
• Max Vacuum hose 5″
• Empty weight 10,500lbs
• Dimensions 7’5″ L x 8’5″ W x 11’2.5″ H

Elevate your production blasting with the Schmidt® AirPrep Deliquescent Desiccant Air Dryer, an industry-standard moisture removal system that uses Deliquescent tablets to absorb moisture for cooler, drier blasting. Experience enhanced efficiency, including 15% faster blasting, while saving on abrasive costs, all achieved through this rugged, skid-mounted system. Tailored to your needs with a range of sizes based on your compressor’s CFM, this galvanized desiccant tank ensures easy maintenance and longevity, promising optimal performance even in high humidity environments and temperature fluctuations.

• The Premium Industry Standard Air Dryer
• Uses Deliquescent tablets to absorb moisture from the blasting air
• Pneumatic Fan motor with Easy Maintenance
• Galvanized Desiccant Tank lasts 5x longer then all competition
• Select size based on the CFM of your compressor
• Come fitted with 4-claw fittings
• 5 year warranty
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing
• ACSD250 / ADS250, ACSD400 / ADS400, ACSD750 / ADS750, ACSD950 / ADS950, ACSD1200  / ADS1200, ACSD1600 / ADS1600

Enhance your blasting operations with the Squat Aftercooler AirDryer System, a compact, industry-standard moisture removal solution designed to increase blasting speed by up to 15%. Leveraging an Aftercooler design for optimum cooling, this system effectively removes moisture, saving on abrasive costs, and comes in sizes tailored to your compressor capacity. Rugged, portable, and equipped with a stainless steel demister pad for effective moisture removal, the Squat Aftercooler AirDryer System is built for high performance in high humidity and varied temperature environments.

• The Industry Standard AirDryer
• Squat Compact Design
• Uses Aftercooler design to cool the air for maximum moisture removal
• Pneumatic Fan motor
• Easy Maintenance
• Size based on the size of your compressor
• ACS250Squat – Rated to 250 cfm (good for 1x #6 blast nozzle)
• ACS400Squat – Rated to 400 cfm (good for 1x #7 blast nozzles
• ACS750Squat – Rated to 750 cfm (good for 2 blasters)
• ACS950Squat – Rated to 950 cfm (good for 2 blasters or occasionally 3)
• This unit will perform best when used in climates where the ambient temperature is above 50°F. Not recommended for use in climates that freeze. Recommend P-ACSD.

The Inlet Airline Moisture Separator, designed specifically for abrasive blasting, provides final stage moisture droplet removal before air enters the blast machine, ensuring minimal pressure loss for peak blasting productivity. Utilizing an elementless design with a tangential flow, and an internal stainless steel coalescer, it handles large air volumes without efficiency loss. This system can be sized at 250cfm or 400cfm based on your blast nozzle and compressor size, and though it requires separate order of inlet fitting or ball valve, it promises improved blasting performance with drier air.

• Installed at blast machine inlet for final stage moisture droplet removal before air enters blast machine
• Tangential flow and elementless design
• Minimal pressure loss for peak blasting productivity
• Requires 1/4′ ball valve for drainage – part no. FVBL006
• Optional autodrain accessory available
• Male threaded inlet and outlet ports
• Inlet fitting or ball valve not supplied – order separately
• Specify Size – 250cfm or 400cfm, based on the size of your blast nozzle and compressor
• Includes internal stainless steel coalescer

• Suits MegaFlow Bull Air Hose (BHBULL50/75)
• Ground Joint Spud Hose Fittings made of Plated Iron – Connects Air hose to Equipment
• Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
• Sold Individually
• Genuine Parts – Manufactured by Dixon

• #1 Fastest Suction Blast System Available
• Uses an Abrasive Pick-Up Tube and flexible Hose to mix abrasive with the airstream
• To set up, simply slide the pick up tube into your bag of abrasive, connect your compressed air and pull the trigger
• Comes with a fixed orifice ¼’ Airjet and ½’ Tungsten Carbide nozzle
• Can be used with any media, right out of the bag
• Ideal for where air supply is limited or for small jobs where setting up conventional pressure blast machine is a nuisance
• Uses between 40-120 cfm of air – the more you have, the faster you blast.
• Sold as a Kit including the gun, nozzle and pick up tubes
• Also referred to as a bag blaster
• Genuine Product – Manufactured by Clemco

• Dual Wheeled Trailer Mounted Blasting Package Including
  • BMS6.5 blast machine with Thompson® Valve outlet
  • 400 cfm AirPrep™ Air Dryer
  • 375 cfm 150 psi diesel air compressor
  • Breathing air filter
  • Carbon monoxide alarm
  • Tool box
  • Hose rack
  • Room for 1 skid of abrasive

• Portable Grade-D breathing air filtration system designed to filter incoming air from a compressor to provide Grade-D quality to respirator users while monitoring for CO and O2.
• Monitors for carbon monoxide with a 3 stage filtration system:
  1. First stage element filters bulk water and particulate and has an auto drain
  2. Second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates, and has an auto drain
  3. Third stage filter removes organic vapors and odors and has a manual drain
• Filter change indicators are standard on all three stages of filtration. Filtration efficiency is 99.99% at .01 micron.
• Incoming air plug with 1/2″ industrial interchange
• Automatic drains with discharge tubes
• Three (3) standard power options available
• Operates on disposable 9-volt batteries, 8-16 volt DC, or 115 VAC

AVAILABLE FOR RENTAL OR PURCHASE

• Will vacuum up to 8 ton/hour of garnet
• Requires 900cfm of air at 120 psi to operate
• Skid mounted abrasive recovery system, Pneumatically operated
• 4 Dust Collector Cartridges with filtration area of 904 sq ft.
• Automatic Reverse Pulse Cleaning
• Works best for dry media disposal

• Suits MegaFlow Bull Air Hose 1-1/2″ and 2″ (BHBULL38/50)
• 4-Claw Crowsfoot Bull Hose Coupling
• Supplied with FMCFG gasket fitted
• Always use HFCLP2 lock pins – order separately
• Rated for 150 psi
• Sold Individually

• Electric
• No icing
• Reduced Noise
• Plug-in & Spray
• Hazardous Location approved
• Energy savings
• Pump type: Xtreme

• Abrasion resistant, flex coated control cable
• Designed to clip onto your battery and connect to your electric deadman control box
• Powers your deadman system from your compressor or any other 12v available battery.

• WATCH VIDEO IN THE IMAGE SLIDER
• Highest productivity hand held blast nozzle available
• Over double the productivity of a #8 high performance blast nozzle with less operator fatigue
• Half the thrust of other #10 blast nozzles available – Feels like you’re blasting with a #7 nozzle
• Up to 16dBA noise reduction – That’s 75% quieter!
• Ideal for blasting acres of steel such as storage tanks, bridges and ship hulls
• Standard contractor nozzle inlet thread
• Delivers faster cleaning rates and increased profit by reducing project duration
• Requires 750cfm compressor
• FREE TRIAL AVAILABLE!

These medium thread nozzles have a longer venturi than the BNAT nozzle series, making them ideal for use in our RotorBlast internal pipe blaster (when blasting pipe 12″ in diamater or greater).  Available in multiple orifice sizes.  When using them in pairs (like when using in the RotorBlast), be sure to calculate your compressor CFM size requirement accordingly. 

Maximize your blasting efficiency with Schmidt® AirPrep™ Aftercooler Moisture Removal Systems, engineered for superior performance even in high humidity environments or critical applications. Utilizing an over-sized radiator for optimal flow and cooling, this rugged system features a stainless steel coalescing demister pad, ensuring non-restrictive, effective moisture removal, and requiring no replacement elements. Built to last, the Schmidt® AirPrep™ enhances production by allowing up to 15% faster blasting and reducing abrasive expenditure, thanks to its negligible pressure loss design and efficient moisture elimination.

FOR RENTAL OR PURCHASE

• The Premium Industry Standard AirDryer
• Uses Aftercooler design to cool the air for maximum moisture removal
• Removes 90% of the moisture in the blasting air
• Pneumatic Fan motor mean you don’t need electricity to run this onsite
• Size based on the size of your compressor
• Suitable for warm weather or indoor use
• Genuine Schmidt® Products – Guaranteed to Perform!

The Radex airline filter (aka canister filter) is the heart of the GVS / RPB breathing air system.  Features as follows:

• Advanced Filtration.  6-stage filtering removes oils, odors, moisture, and particulates from breathing air
• Durable.  Cast aluminum construction for lightweight durability on jobsites as well as in factories.
• Flexible.  Can be either floor or wall mounted using the included twist-and-lock bracket
• Customizable.  Comes with either 2-outlets (1 for an operator and 1 for the CO monitor) or 6 outlets.  And if you already have a 2-outlet version and need to upgrade to 6, this can be done with the Radex Six Outlet Upgrade Kit.
• Other included features.
  • 150 PSI safety pressure relief valve
  • Chicago 2-claw coupling inlet port
  • Quick Connect outlet ports
  • Brass manual drain tap
  • Pressure regulator to adjust outlet air pressure
  • Replaceable APF3100 filter element (lasts up to 3 months or 400 working hours)
• Options.
  • Auto Drain Unit.  Automatically drains moisture from Radex, helping to prevent premature failure to the filter element due to maintenance oversight.
  • Micro Mist Filter.  Further removes moisture and oil. Recommended if compressor has possible moisture or oil blow-by issues.  Reduces chance of oil contamination of CO monitor sensor.
  • Mainline Pre-Filter.  Extra support for particulate removal down to 0.15 microns and extends life of primary filter element. 

NOTE:  This unit does not filter or monitor carbon monoxide (CO).  It is designed to be used with the RPB GX4 Carbon Monoxide monitor.

Boost profits and reduce frustration by converting your EcoQuip® blasting rig to MistBlaster® technology.

• Boost profits by:
  • Increased production speed
  • Reduced wasted abrasive and rust inhibitor
  • Less water usage, reduced cleanup time
  • Winning more projects because dry blasting is easy too!
• Reduce frustrations by:
  • No need to drain the tank at end of day
  • Allows adjustment of water / abrasive ratio

Our conversion allows you to keep your existing trailer and compressor, saving tens of thousands of $$ versus a new package. Works on other brands too (contact us for details)

Not convinced?  Contact us to discuss a demo/trial and compare for yourself!  Find out why you can’t find any Mist Blasters on used blast equipment websites.

• E-Xtreme Electric High Performance Airless Pump
• The Graco Z60 Sprayer is an electric alternative to air-operated single leg sprayers.
• It produces a smooth, consistent, evenly distributed spray pattern without the need to tow a large compressor.
• Will pressurize up to 6000psi working pressure
• Sprayer package in
  • Graco Z60 Electric Airless Pump
  • Includes Heavy Duty Cart
  • 3/8in x 15m Spray hose, 1/4in x 1.8m whip hose,
  • Graco XTR704 Spray gun with  XHD519 spray tip
• Genuine Products – Manufactured by Graco