Search: defelsko

Loading fixtures, stubs for adhesion testing.

• Sizes from 10mm-50mm
• Metal adhesion tests typically use 10, 14, and 20mm dollies
• Concrete adhesion tester accessory kits use 50mm dollies
• Order glue separately, available here

For use with PosiTest AT equipment.

The PosiTector® 6000 probe family – DeFelsko’s solution for non-destructive coating thickness measurement on metallic* substrates. This is the most extensive range of instrument probes that DeFelsko offers – many versions available for many different applications. Further details as follows:

• Familiar.  These interchangeable probes are compatible with the tried-and true DeFelsko Standard and Advanced Gauge Bodies.  In addition, all current versions can also be paired with the PosiTector SmartLink / mobile app platform. (Compatibility chart available under the document tab to confirm compatibility on older gages.)
• Versatile.  Checks coating thickness in many applications, including:
  • Single-handed use (integral probes)
  • Cabled probes in various lengths
  • Hot / Rugged applications
  • Very thin to very thick coatings
  • and more!

This page shows probes only.  Package options including DeFelsko 6000 Standard Gages and DeFelsko 6000 Advanced Bodies are shown on their separate pages. Probes – not the Gage / Bodies – are factory calibrated and each new probe comes with a Certificate of Calibration.  For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.)  Contact us for information on probe repairs or probe re-certifications. *The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.

The PosiTector® 6000 probe & advanced gage / body kit family – DeFelsko’s premium solution for non-destructive coating thickness measurement on metallic* substrates. The PosiTector 6000 series is the most extensive range of instrument probes that DeFelsko offers – many versions available for many different applications. Further details as follows:

• Familiar.  The PosiTector Gauge / Body is the tried-and-true platform offering interchangeability with most DeFelsko probes.
• Versatile.  Checks coating thickness in many applications, including:
  • Single-handed use (integral probes)
  • Cabled probes in various lengths
  • Hot / Rugged applications
  • Very thin to very thick coatings
  • and more!

This page shows Kit / Packages for the Advanced Body with your choice of PosiTector 6000 probe.  (Compare the features of the PosiTector Standard and Advanced Gauges on their separate page.) Other configurations (PosiTector 6000 Probe-only, PosiTector Gage/Body-only and PosiTector Standard Body / Probe packages) are shown on their separate pages.

Probes – not the Gage / Bodies – are factory calibrated and each new probe comes with a Certificate of Calibration.  For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.)  Contact us for information on probe repairs or probe re-certifications.

*The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.

The DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.

• Designed for uninterrupted use of PosiTector® devices
• Includes USB cable and AC power adapter for versatile power options
• Compatible with a wide range of PosiTector® models
• Selection of electrical plugs for international compatibility
• Ideal for continuous operation without battery dependency

Safeguard the display of your PosiTector® instrument against paint overspray and other contaminants with the DeFelsko® Protective Lens Shield. This pack of five thin plastic lens shields is designed to provide a clear and durable layer of protection, ensuring your device’s screen remains readable and scratch-free. Each PosiTector® instrument includes one lens shield, with additional packs available for ongoing protection.

• Designed specifically for PosiTector® instruments
• Pack of five thin plastic lens shields for durable protection
• Prevents paint overspray, dust, and debris from damaging the display
• Ensures display remains clear and scratch-free
• Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models

BlastOne carries all DeFelsko instruments, supplies, and accessories.

This product is designed for use with the PosiTest LPD.  It aids detection of very small pinholes by lowering the surface tension of the water.

• Includes two 60mL bottles

Replacement Tape specially designed for both the PosiTest® CH ASTM Kit and the PosiTest® CH ISO Kit, this high-quality replacement tape ensures precise adhesion evaluation in line with ASTM D3359 and ISO 2409 standards. 

• Specifically designed for the PosiTest® CH Cross Hatch Adhesion Test
• Optimized for both ASTM D3359 and ISO 2409 testing standards
• 1 inch x 72 yards roll for the ISO 2409 Kit
• 1 inch x 90 yards roll for the ASTM D3359 Kit
• Essential for maintaining accuracy in adhesion testing

The PosiTector® 200 – DeFelsko’s solution for measuring coating thicknesses on non-metallic substrates.  Capable and configurable, it has the following highlights:

• Familiar.  Built on the tried-and-true PosiTector® gauge body platform / interchangeable measurement probe design.
• Capable.  Three separate probe designs available for the following applications:
  • PRB200B: Polymer coatings on wood, plastic, etc. up to 40 mils
  • PRB200C: Coatings on concrete, fiberglass, etc., from 2-150 mils
  • PRB200D: Thick/soft coatings such as polyurea, etc. from 2-300 mils
• Configurable.  Available as follows:
  • Probe only.  Use with your existing PosiTector® gauge.
  • Standard PosiTector® package with choice of probe.
  • Advanced PosiTector® package with choice of probe.
  • Note:  All PosiTector® 200 packages come with case, ultrasonic gel, calibration certificate, shims, and more.

Note:  Compare specs and features of the DeFelsko Standard vs Advanced Gage/Bodies on their separate web page.

DeFelsko OTL Engraved Tags – enhance organization of Oven Temperature Logger Temperature probes.

Set of 6.

Reduce the investment required to convert to PosiTest® HHD equipment by using these adaptors.  Makes other brands of brush and spring electrodes compatible with DeFelsko High Voltage Holiday Detectors. (Adaptor not required for SPY electrodes)

• Three adaptors available with MPN’s shown, as follows:
  • HHDPCWIADPT – PCWI Adaptor
  • HHDTRADPT – Tinker & Rasor Adaptor
  • HHD266ADPT – 266 and 280 Adaptor

BlastOne offers all DeFelsko instruments and related consumables, available for easy ordering on-line.

Four of the standard formulation 8oz. bottles are included with each new PosiTest® AIR instrument kit, and replacement bottles are offered here in boxes of 16 bottles.

The economical standard formulation is designed for temperatures between -10° C (14° F) to 65° C (150° F).  A low-temperature version is optionally available which works down to -20° C (-4° F).

Test disks are used in the Positector BHI Barcol Hardness Impressor to verify the operation.

Two aluminum alloy disks are included (1 Hard and 1 Soft) with each new DeFelsko BHI probe kit.  The replacement disks shown here come in packs of 5 with a plate included, and are available in the following hardnesses:

• Hard
• Soft
• Extra Soft

BlastOne stocks all accessories and supplies for the DeFelsko PosiTest® LPD pinhole detectors.  This category has the replacment sponges and sponge hardware.  Details as follows:

• Adaptable sponge hardware for a variety of test configurations
• 8″ and 18″ square sheet sponges for cutting custom shapes
• 7″ and 24″ wide roller wands, including initial sponges
• Replacement sponges to use in rectangular or roller holders. Note:  roller sponges are 30mm wide, with 6 being used in the 7″ wand, and 19 being used in the 24″ wand. 

The indentor for the PosiTector BHI Barcol Hardness Impressor is the tip of the probe, used in obtaining the measurements.

A spare indentor and replacement tool are included with each new DeFelsko BHI kit.  This item is a set of 2 tips with tool, and is available separately as a replacement order item.

MPN:  BHIINDENTOR

DeFelsko oven temperature probes for use with their OTL system: Extend the reach of the logger with the wide selection of probes as follows:

• Applications.  Available in both Surface and Air types.
• Mountings.  Available in Magnetic, Clamp, and Washer mounts.
• Lengths.  Stainless braided cables commonly stocked in 3 lengths, and custom lengths available by special order.

The PosiTector Dew Point Meter Logger is an award-winning instrument for measuring climatic conditions.  Not only does it monitor and record all relevant environmental factors, it does this autonomously!  

Magnetically attaches to steel (optional Kensington anti-theft lock available), this device can monitor and record data for up to 200 days, helping to confirm project climatic conditions and thereby reducing the possibility of future liability.  

Connects via BlueTool to the PosiTector app or to an Advanced Gage / Body and measures:

• Air Temperature
• Surface Temperature
• Humidity
• Dew Point
• Wet Bulb

The glass zero plate for the PosiTector BHI Barcol Hardness Impressor is used when replacing the indentor, adjusting for wear, etc.

A glass plate is included in the BHI kit, and is available separately here as a replacement item.

MPN:  BHIGLASS

This 10 pack of filters is specifically designed to maintain the pristine condition of your environmental monitoring device. Ideal for professionals committed to precise and reliable measurements, these filters protect your investment, keeping your device operational in any condition.

• 10 pack of replacement filters designed for the PosiTector® DPM L

Optional spring-loaded Dust Tape Roller, used to apply recommended constant force.

Use for visual assessment of scratch and gouge marks. 

The PosiTector® 6000 probe & standard gage / body kit family – DeFelsko’s basic solution for non-destructive coating thickness measurement on metallic* substrates. The PosiTector 6000 series is the most extensive range of instrument probes that DeFelsko offers – many versions available for many different applications. Further details as follows:

• Familiar.  The PosiTector Gauge / Body is the tried-and-true platform offering interchangeability with most DeFelsko probes.
• Versatile.  Checks coating thickness in many applications, including:
  • Single-handed use (integral probes)
  • Cabled probes in various lengths
  • Hot / Rugged applications
  • Very thin to very thick coatings
  • and more!

This page shows Kit / Packages for the Standard Body with your choice of PosiTector 6000 probe.  (Compare the features of the PosiTector Standard and Advanced Body on their separate page.) Other configurations (Probe-only, Body-only and Advanced Body / Probe kits are shown on their separate pages.

Probes – not the Gage / Bodies – are factory calibrated and each new probe comes with a Certificate of Calibration.  For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.)  Contact us for information on probe repairs or probe re-certifications.

*The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.

The PosiTector UTG – DeFelsko’s solution for measurement of wall thicknesses of pipes, tanks, and more where access is limited to one side.  Here are some highlights of the highly capable DeFelsko ultrasonic thickness gage probe family:

• Familiar.  The UTG family of probes are interchangeable with the tried-and-true DeFelsko gage body platform.
• Capable.  Six different probe versions are available, depending on the requirements of the application.  The first four are standard corrosion single-echo probes designed for applications where the surface is unpainted (or has the paint removed.)
  • PRBUTGC:  Standard frequency 5mz transducer. Cabled.
  • PRBUTGCX:  Xtreme version of above with a braided stainless cable with strain relief for demanding use.
  • PRBUTGCA:  Same as above, except integral  non-cabled design. This version is ideal for one-handed use.
  • PRBUTGCLF.  Low-frequency 2.25mz transducer for attenuative materials like cast iron.  Standard cable.
• The following two models are both cabled, and can be used on either painted or non-painted substrates.
  • PRBUTGM:  5mz transducer with highly versatile single and multi-echo modes.  Single mode offers greater (up to 5 inches thick) measurement range, but should be used where paint has been removed.  Multi-echo mode does not require the paint to be removed and can measure walls up to 2.5 inches thick.  This version has a durable alumina wear face and is ideal for use on rough or blasted surfaces.
  • PRBUTGP: 15mz transducer offers high precision when measuring thin materials (up to .475 inch thick steel or up to .175 inch thick plastic).  It has automatic single / multi echo mode switching for use on painted or unpainted surfaces.  This probe can be used to measure thicknesses of plastic bottles, aircraft windows, thin-wall pipe, and much more.
• Configurable.  Any of the six probes can be configured in the following packages:
  • Probe only.  Use with your existing PosiTector gauge.
  • Standard PosiTector package with choice of probe.
  • Advanced PosiTector package with choice of probe.
  • Note:  All PosiTector UTG packages come with case, ultrasonic gel, calibration certificate,  and more.

Compare the features of the PosiTector Standard vs Advanced Body on their separate web page.

The PosiTest OTL – DeFelsko’s solution to monitor and record temperature profiles in Powder Coating and other industrial ovens. Configurable in various ways, some of it’s features include:

• Simple Design.  With an easy-to-use interface and bright LED’s to indicate logger status, operating the Oven Temperature Logger is simple and intuitive.
• Capable.  The DeFelsko OTL can:
  • Measure & record up to 40,000 datasets in up to 6 batches. Records temperatures every 2 seconds for up to 22 hours.
  • 6 ‘Channels’ (K-type thermocouple ports) for adding temperature probes.
• Configurable.  Depending on the specific application, the OTL offers various configurations, such as:
  • PosiTest OTLKIT, including logger with barrier box and standard Holder (65 minute endurance at 200° C)
  • PosiTest OTLKITXT, same as above, except with heat-sink Holder (200 minute endurance at 200° C)
  • (See sliding scale endurance chart on the brochure under the Documents tab)
  • OTL logger only without barrier box, for use with temperature probes and when the logger does not need to be in the oven.

Note:  See the selection of temperature probes on the You May Also Like below.

The PosiTector GLS – DeFelsko’s system for measuring glossiness, haze, and more.  Working on many varied substrates, the DeFelsko GLS gloss meter is highly capable with the following highlights:

• Familiar.  The GLS probe is built on the tried-and-true PosiTector gage/body platform as one of many interchangeable measurement probes.
• Capable.  Three separate probe designs available for the following applications:
  • 60° measurement angle, suitable for most gloss applications and the preferred angle for semi-gloss
  • Combination 20°/60° measurement angles, suitable for high and semi-gloss applications w/haze indexing.
  • Combination 20°/60°/85° measurement angles, suitable for matte, high-, and semi-gloss applications, also with haze indexing.
• Configurable. Available as follows:
  • Probe only.  Use with your existing PosiTector gauge.
  • Standard PosiTector package with choice of probe.
  • Advanced PosiTector package with choice of probe.
  • Note:  All PosiTector GLS packages come with case, integrated calibration standard, calibration certificate, and more.

Note:  Learn more about the differences between the PosiTector Standard vs. Advanced Gage/Body on their separate web page.

The PosiTector®SHD – DeFelsko’s solution for measuring shore hardness on non-metallic surfaces.  Capable and configurable, it offers the following:

• Familiar.  Built on the tried-and-true PosiTector gauge / body platform, with interchangeable measurement probe options.
• Capable.  The SHD comes in two probe models for different hardness ranges.
  • Shore A (soft to hard materials such as soft rubber, elastomers, neoprene, silicone, etc.
  • Shore D (medium to extra hard materials such as hard rubber, hard plastics, epoxies, PVC, acrylic, etc.
• Configurable.  Available as follows:
  • Probe only.  Use with your existing PosiTector gage.
  • Standard PosiTector package with choice of probe.
  • Advanced PosiTector package with choice of probe.
  • Note:  All PosiTector SHD packages come with case, test block, calibration certificate, holster, and more.

Note:  Compare specs and features of the DeFelsko Standard and Advanced Gage / Bodies on their separate web page.

The PosiTector® DPM – DeFelsko’s solution for measurement of climatic conditions for industrial coating applications.  Versatile and capable, these environmental measuring instruments have the following highlights:

• Familiar.  Built on the tried-and-true PosiTector® gauge/body platform design with interchangeable probes.
• Capable.  Measures and records environmental conditions including:
  • Relative Humidity (RH)
  • Air Temperature
  • Surface Temperature
  • Dew Point temperature
  • Surface/Dew Point Delta
  • Wind speed (one model only)
  • Wet-Bulb (when used with Advanced Bodies only)
• Configurable.  Available as probes-only (to use with an existing gage/body), or in packages with a new gage body, these DPM probes are available as:
  • DPM Integral, with direct-contact surface thermometer
  • DPMIR Integral, with infrared surface thermometer, for use on moving parts, very hot parts, etc., where direct contact is not possible.
  • DPMS Integral, with cabled, magnetic surface temperature sensor for continuously logging surface temperatures. Also available for this model are 2 options:
    •  A liquid temperature probe, for measuring paint temperature prior to application
    • A hand-held surface temperature probe, for spot-checking hard-to-reach areas.
  • DPMA Integral, with all standard features plus a wind-speed indicator
  • DPMD Cabled, with ½” NPT threads for insertion into pipe and other areas that can’t be accessed by other versions.

Note:  The PosiTector® DPM L is an autonomous version, and can be attached independently to steel for longer-term climatic condition recording.

The PosiTest® PC – DeFelsko’s solution for non-destructive prediction of final thickness on powder coated finishes.  This latest model offers both an improved design and lower pricing than before.  Features include:

• Simple Design.  Dedicated stand-alone unit is very easy to learn and use.
• Durable.  Solvent, acid, oil, water, and dust resistant – a great combination when used in harsh powder environments.
• Powerful.  Stores up to 999 readings with on-screen averaging.  Readings can be downloaded to PosiSoft desktop software using the included USB cable.
• Accurate.  New sensor design improves measurement on odd geometries, moving parts, and small tubes.  Complies with ASTM D7378.
• Flexible.  Available in the following configurations:
  • PosiTest PC dedicated kit.  Includes PC device, zero probe fixture, protective lens, carry case, and more.
  • Powder Inspection Kit with PosiTector 6000.  Includes PC dedicated kit, powder combs, choice of Standard or Advanced PosiTector 6000 body, and choice of FS Ferrous or FNS Combination Ferrous / Non-Ferrous cabled coating thickness probe.
  • Powder Inspection Kit with PosiTest DFT.  Includes PC dedicated kit, powder combs, and choice of Ferrous or Combination Ferrous / Non-Ferrous dedicated DFT gage.

The PosiTector® CMM IS – DeFelsko’s solution for In Situ Concrete Moisture Metering conforming to ASTM F2170 testing standards. Innovative and simple to use, this PosiTector Concrete Moisture Meter offers the highest levels of testing accuracy, helping to prevent costly concrete coating failures. Selected features as follows:

• Simple Design.  Individual In-Situ meters, inserted into holes drilled into concrete, connect wirelessly to the PosiTector App, or to a PosiTector Advanced Gage/DPM probe.
• Capable.  The PosiTector CMMIS offers the most accurate moisture measurement in concrete as it detects moisture levels well below the floor surface.
• Configurable.  With various expandable package options, the CMM IS platform can test on any size concrete floor, as follows:
  • 3 probe Basic Kit, including caps, probe sleeve extensions, calibration check chambers and other accessories required for testing.
  • 5 probe Complete Kit, including all the above plus a carrying case and a vacuum tool for cleaning out the drilled holes.
  • 5 Probe Pro Kit, combines a PosiTector Advanced Gage/DPM probe with the above Complete Kit.

Among other requirements, ASTM F2170 requires 3 tests for the first 1000 square feet of floor area, and one additional test for each 1000 square feet.  For larger floors, CMM IS Expansion Kits are available in various sizes.

The PosiTest Cross Hatch Adhesion Test Kit – DeFelsko’s system for detecting a coating’s ability to adhere to its substrate.  Multiple package options available, depending on the test standard selected and the thickness of the coating.  Details as follows:

• Simple. Straighforward and easy-to-use, each package includes all tools and accessories needed for cross hatch testing
• Comfortable.  The ergonomic tool handle has a non-slip grip
• Capable.   Designed for coatings up to 10 mils thick and available in configurations to meet two different international standards.  (See long description tab for for standard details.)
• Package options.
  • ISO 2409 Standard
    • 1 mm / 6 Teeth blade version
    • 2 mm / 6 Teeth blade version
    • 3 mm / 6 Teeth blade version
  • ASTM D3359 Standard
    • 1 mm / 11 Teeth blade version
    • 2 mm / 6 Teeth blade version
• Package contents.  Each kit includes the following:
  • Cross Hatch Tool
  • 4-in-1 Blade to match the relevant standard
  • Magnifier – 3X (ISO) or 10X (ASTM)
  • Tape to match the relevant standard
  • Brush
  • Scissors
  • 3/32″ Hex Key
  • ISO/ASTM Classification Reference Chart
  • Instruction Manual
  • Durable Hard Shell Case

Additional tape and blades are available under the repair parts tab.

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.

This thermal printer paper is compatible with the DeFelsko Bluetooth printer and is packed in convenient boxes of 10 rolls.

MPN:  PAPERBT

Repair – don’t replace –  your DeFelsko® PRBUTG P (Ultrasonic Thickness Gauge Precision probe) when the transducer fails.  Save hundreds!  BlastOne carries replacement parts for all DeFelsko products including this replacement transducer.

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.

This printer is compact and portable and is compatible with many DeFelsko PosiTector instruments.  Additional details as follows:

• Bluetooth wireless technology for easy data transfer from PosiTector® Advanced models
• Fast print speed of 6mm/s with ink-free thermal paper
• Rechargeable Lithium-Ion battery and universal AC adapter included
• Lightweight and compact design for portability
• One year warranty for peace of mind
• Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS

MPN:  PRINTERBT

Thickness standards are used to verify the accuracy and operation of coating thickness gauges.  As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.

DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified Coated Metal Plates (one being a zero plate).  

Select the Standard set that most closely matches the measuring range of your probe.  See selection chart under the Description tab.

Thickness standards are used to verify the accuracy and operation of coating thickness gauges.  As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.

DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified polystyrene blocks, intended for probes that measure thick coatings (60 mils / 1500 microns and up)

Select the Standard set that most closely matches the measuring range of your probe.  See selection chart under the Description tab.

PosiTector SHD Test Blocks – DeFelsko accessories for checking the operation of the SHD Durometer Probes.

Available in 3 variations each for Shore A and Shore D hardness measurement ranges.

Quickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems.  Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems.

DeFelsko MPN:  AIR

The PosiTector® interchangeable probe inspection system is the backbone of the DeFelsko instrument collection.  Save time and cost by choosing a pre-configured multi-probe inspection kit.  Details on the most popular inspection kit configurations are as follows:

• Standard Inspection Kits include:
  • Choice of either Standard or Advanced Body. (Compare features on the PosiTector Standard and Advanced Bodies on their separate page.)
  • PosiTector SPG, Surface Profile Gauge
  • PosiTector DPM, Environmental Probe
  • Choice of Coating Thickness Probe:
    • Ferrous or Combination Ferrous / Non-Ferrous
    • Cabled or Integral
    • Standard range (0-60 mils / 0-1500 microns) or Extended range (0-250 mils / 0-6mm).  More details about the PosiTector 6000 coating thickness probes is on their separate page.
• Extreme Inspection Kit includes:
  • Advanced Body
  • PosiTector RTR-H, Testex Replica Tape Reader Probe for Surface Profile
  • Testex X-tra Coarse tape roll
  • PosiTector DPM, Environmental Probe
  • PosiTector DPM-L, Remote Environmental Logger
  • PosiTector FS, Cabled, Ferrous, Standard Range probe
• Also Includes:  In addition to the selected gauge and probes, each kit also includes a carry case, calibration certificate, plastic shims, and more!

For custom configurations, contact us by chat, phone, or email for prompt response.

BlastOne offers all DeFelsko products, including testing instruments, their accessories, and related supplies.

This group of mechanical gauges use rare-earth cobalt magnets to manually measure coating thickness on ferrous substrates. Additional information:

• Simple.  Straightforward and able to be used in any orientation.
• Capable.  Scales available in both mils and microns, and in 2 thickness ranges.  Can measure coatings on cylindrical surfaces too.  Go / No-Go button can be set for rapid measurement.
• Sturdy.  Wear-resistant carbide probe and rugged housing for years of service.

• Rods: choose between 5″ (13cm) and 20″ (50cm)
• Replacement electrode rod thumb screws – sold in packs of 3
• Manufacturer part #’s:
  • HHDEXTRODS
  • HHDEXTRODL
  • HHDTHMBSCR
• Made in the USA

The Telescopic Extender is designed to enhance ease and efficiency. This lightweight device allows for ergonomic moisture measurements on large surfaces without the discomfort of bending or kneeling. 

• Lightweight, ergonomic design for comfortable use.
• Length: 18.5 inches (collapsed) and up to 49 inches (extended)
• Secure ¼”-20 threaded mounting point for easy attachment.
• Optimized for use with the PosiTest CMM Concrete Moisture Meter.
• Ideal for quick, large surface moisture evaluations.

• ResinLab EP1 1HT 2-Part Epoxy with additional glue, mixing sticks, palettes and cotton swabs
• Approximate Epoxy Yield*
  • 10mm: ~400 dollies
  • 14mm: – 200 dollies
  • 20mm: – 100 dollies
  • 50mm: – 16 dollies

*Actual results will vary based on amount of epoxy used per dolly and waste. 

• Manufacturer part# ATADHESIVEKIT
• Made in the USA

• Ideal for use on small, hot or hard-to-reach surfaces
• Compact – the size of a ball-point pen
• Rugged – unaffected by mechanical shock, acid,  oil, water and dust
• No user adjustment needed
• Wear-resistant probe tip ensures long life and reliable accuracy
• Certificate of calibration showing traceability to PTB included
• Conforms to ASTM D7091/B499, ISO 2808 and others

• Manufactured to a tolerance of ±5 microns or ±0.0002 inch
• Easy to carry – convenient pocket size
• Available in both microns and mils
• Durable aluminum construction for long gage life and static control
• Protective leather pouch included
• Works on a variety of shapes, sizes and substrates including metal, plastic, wood, glass, etc.
• Manufacturer part#’s PC1, PC2, PC3, PC4, PC5, PC6
• Made in the USA

BlastOne offers all DeFelsko testing instruments, accessories, and supplies.

This pack includes adaptable sponge hardware and accessories to convert the Basic Kit to the Complete Kit. It includes the following: 

• Adaptable Sponge Hardware
  • Roller 
  • Internal Diameter
  • 8″ x 8″ (20 cm x 20 cm) Sheet Sponge for custom usages
  • Wetting Agent
• Extension Accessories 
  • Extension rods provide an additional 2′ (0.6 m) of reach
  • Universal adapters to extend existing paint rollers and poles
  • 40′ (12 m) Ground Wire
  • Magnetic Grounding Post
• Hard Shell Carrying Case

MPN:  LPDACCPK

BlastOne carries all DeFelsko instruments, supplies, & accessories.

This accessory converts the PosiTest LPD low-voltage pinhole detector into a cabled wand style unit and is compatible with the rectangular and roller sponge hardware (not included). 

The unit comes complete with the remote wand handle and a 5′ (1.5m) hot-wire cable.  

BlastOne offers all parts and accessories for DeFelsko testing instruments.

This extension rod accessory extends the reach of the PosiTest® Low Voltage Pinhole Detector by 12″ (305mm).  Multiple extensions can be connected together to further extend the reach.

MPN:  LPDEXTROD

BlastOne stocks all accessories and supplies for DeFelsko testing instruments.

This PosiTest LPD verifier is designed to check the accuracy of the low-voltage pinhole detector.  

In addition to checking accuracy, the Verifier can be used to calibrate the LPD if used in conjunction with a digital multimeter (not included). 

Each PosiTest LPD Verifier comes complete with a Decade Box, connection cable, and instructions.  

MPN:  LPDVERIFY

BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.

Replacement fins for the PosiTector CMM IS probe come in packs of 4 or 16.

The fins help ensure the stability of the probe in the test hole and should be replaced when worn.

• Suits PosiTest HHD High Voltage Holiday Detector
• Used to connect DeFelsko or SPY rolling spring electrodes to the PosiTest HHD
• Sold Individually

The PosiTest® DT Dust Tape Kit assesses the quantity and size of dust particles on blast cleaned surfaces. It includes the following: 

• Roll of ISO 8502-3 Tape (25 mm wide)
• Scissors
• Illuminated 10x Magnifier (with batteries)
• Dust Test Comparator 
• Transparent Display Boards
• Report Forms (pack of 25)
• Multi-Language Instruction Manual
• Hard Shell Plastic Case with custom foam insert 

NOTE: PosiTest DT Dust Tape Roller is sold separately.

The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards.  The DeFelsko SST test probe is an easy and accurate way to conduct these tests.  Test patches are required to perform them and DeFelsko has multiple options, as follows:

• PosiPatch™.  This innovative product utilizes a reusable patch, held by a magnetic ring against the surface.  Available in 2 configurations:
  • Rigid ring.  Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
  • Flexible ring.  Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
  • Saves time and money vs. disposable patches.
  • Utilizes a plastic needle – no sharp hypodermic needles required!
• Latex Disposable.  The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
• Latex-Free Disposable.  Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.

Note:  Both disposable options from DeFelsko feature low-tack adhesive with TearGuard™ technology for easy patch removal.  No residue to clean from the surface when using any DeFelsko SST test patch option!

Each DeFelsko instrument family is factory calibrated and is designed to be ready-to-use upon arrival.  Best practice and specifications determine when instruments should have their calibrations rechecked.

For the PosiTector UTG probes, DeFelsko offers five different variations of stainless steel Step Blocks that are factory certified for checking their calibration, as follows:

• B1.  Standard range Imperial.  Five steps (100, 200, 300, 400, and 500 mils).
• B1M.  Standard range Metric.  Five Steps (2.5, 5, 7.5, 10, and 12.5 mm).
• B2.  High range Imperial.  Eight steps (1″, 1.5″, 2″, 2.5″, 3″, 3.5″, 4″, and 4.5″).
• B2M.  High range Metric.  Eight steps (25, 37.5, 50, 62.5, 75, 87.5, 100, and 112.5 mm).
• P.  (Use with PosiTector UTG P probe.)  Imperial labeled at 40, 60, 80, and 100 mils.  (Metric equivalent 1, 1.5, 2, and 2.5 mm)

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.

Inspection instruments are an investment worth protecting and DeFelsko has a range of protective cases available, as follows:

• The PosiTector Case.  Sturdy hardshell design designed to carry a PosiTector gage / body and multiple probes.  Space for manuals, calibration certificates, and more.  MPN: CASEINSP
• The Pelican Standard Inspection Kit Case.  Lightweight, watertight, and crushproof, this case securely stores a PosiTector Gage and 3+ PosiTector probes with customized foam inserts.  13.4″ x 11.6″ x 6″.  The MPN is CASEINSP-P.
• The Pelican Large Inspection Kit Case.  Like the smaller Standard version above, this unit is lightweight, watertight, and crushproof but is larger to accommodate 5+ probes as well as SST Soluble Salt Tester accessories.  18.2″ x 13.4″ x 6.7″ .  The MPN is CASEINSPL-P.
• The Pelican Adhesion Tester Case.  Heavy duty, waterproof construction features customized foam inserts for the PosiTest AT-A automatic tester.  18.2″ x 13.4″ x 6.7″.  The MPN is CASEATAB-P.

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, deionized water is measured before injecting under the patch.  These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10.

MPN:  SSTCUP

• Available in 25′ or 50′ lengths
• Manufacturer part #’s:
  • 25′ – HHDGND25
  • 50′ – HHDGND50

Recommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate.

This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive.  One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.

Burnishing tools facilitate accurate and easy use of Testex Press-O-Film replica tape.  Multiple types available, as follows:

• Economical plastic.  Sold in packs of 10, these have 8mm round ends.
• Durable stainless.  Same design as the plastic version, but constructed of stainless steel for long life.
• Burnishing ball.  Designed to use with optical grade tape, for use with the RTR 3D probe.

• 1.5m insulated cable, coverts the PosiTest^® HHD to a wand-type instrument
• Not for voltages >15kV

Help new staff learn the correct way to take tape impressions for measuring surface profile with this Testex training surface.

This training tool is precision cut with inverted v-ridges, simulating a 3.1 mil (78 micron) profile.  It is recommended for the trainee to take at least 3 readings with X-Coarse Testex tape to provide practice for the amount of pressure needed to obtain accurate readings.

This surface training tool is designed for long life, and can be reused over and over again.

The DeFelsko GLS Gloss Meter has an on-board calibration standard. Periodically, or when dust / dirt are visible, the gloss standard should be cleaned to ensure measurement accuracy.

10 packs of cleaning wipes are included with each new DeFelsko GLS kit.  This item is also a set of 10 wipes, and is available separately as a replacement order item.

MPN:  GLSCLEANKIT

These 4-in-1 replacement blades are essential for precise cross hatch testing, ensuring compliance with ISO 2409 and ASTM D3359 standards. Each blade is crafted for durability and precise cuts, making them indispensable for professionals requiring accurate adhesion testing results.

• Available in configurations for both ISO 2409 and ASTM D3359 standards
• 1 mm / 6 teeth blade for ISO 2409 specific tests
• 2 mm / 6 teeth blade suitable for both ISO 2409 and ASTM D3359 tests
• 3 mm / 6 teeth blade designed for ISO 2409 tests
• 1 mm / 11 teeth blade exclusively for ASTM D3359 tests
• Ensures accurate and compliant cross hatch testing

The PosiTector SST – DeFelsko’s innovative solution for accurate measurement of surface salts.  This soluble salt tester is fully interchangeable with the PosiTector platform and offers the following:

• Familiar.  The DeFelsko SST is one of the expansive list of probes interchangeable with the tried-and-true PosiTector gage/body.
• Capable.  In addition to soluble salt measurement, it displays the test duration, sample temperature, and more.
• Configurable.  Available in the following:
  • Probe only.  Use with existing PosiTector gauge.
  • Probe / Gauge.  This basic kit includes carrying case.
  • PosiPatch kit.  Available with choice of gages, this Kit P includes choice of standard or flexible magnetic rings as well as starter supplies.
  • Disposable latex-free kit.  Choice of gages as well as a supply of DeFelsko Adhesive patches, this Kit D also includes starter supplies.
  • Disposable Latex Adhesive kit.  Choice of gages as well as a supply of Latex Adhesive patches, this Kit L also has the other starter supplies needed to get started.
• Note:  Both disposable patch options feature easy-to-remove adhesive that don’t leave residue on the surface.

The PosiTest CMM – DeFelsko’s solution for accurate comparative concrete moisture measurements.  Simple and powerful, it offers a convenient way to conform to ASTM F2659.  Selected features as follows:

• Simple Design.  Simply placing the DeFelsko CMM directly on a clean, concrete floor gives a quick moisture measurement. It is a non-destructive test and doesn’t require holes to be drilled in the concrete slab or screed.
• Fast.  The CMM gives instant readings.
• Robust.  Sturdy IP65 construction offers weatherproof, dust proof, and water resistance.  Shock resistant too!
• Easy to use.  For large areas, the optional DeFelsko Telescopic Extender eliminates the need for kneeling to perform the tests.
• Capable. Tests concrete moisture to depths of ¾ or 1 inch.  Integrates with PosiSoft software via USB cable for reporting.

Note:  ASTM 2659 standardizes testing criteria for comparative moisture testing on concrete and cement floors.  This instrument is not intended to test moisture levels deep within the slab, and is recommended to be used as a moisture comparator.

Thickness Standards are used to verify the accuracy and operation of coating thickness gauges.  As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.

These Plastic Shims (aka foils) are low-cost alternative to coated metal plates.  They are available in Certified (individual shims or full sets) and in Un-Certified sets.  Accuracy is somewhat less than metal plates and they are more sensitive to heat. They are intended for use over a Zero Plate, or over an uncoated substrate.

A set of un-certified plastic shims is included with most electronic DeFelsko coating thickness gauges.  Replacement sets and certified options are available here as follows:

• Un-Certified.  These are checked for accuracy within tolerance shown below at DeFelsko, but are not traceable to any standard. They come as a set of 5 only, in the following approximate thicknesses:
  • 25 microns / 1 mil (Orange), +- 20% accuracy
  • 50 microns / 2 mils (Red), +- 10% accuracy
  • 125 microns / 5 mils (Blue), +- 5% accuracy
  • 250 microns / 10 mils (Brown), +- 5% accuracy
  • 500 microns / 20 mils (Yellow), +- 5% accuracy
• Certified.  Includes certificate of calibration traceable to PTB and all are accurate to within 2 microns / 0.08 mils.  Available in the following thicknesses individually, or as a complete set of 8 shims:
  • 25 microns / 1 mil (Orange)
  • 50 microns / 2 mils (Red)
  • 75 microns / 3 mils (Green)
  • 125 microns / 5 mils (Blue)
  • 250 microns / 10 mils (Brown)
  • 500 microns / 20 mils (Yellow)
  • 1000 microns / 40 mils (White)
  • 1500 microns / 60 mils (Black)

The PosiTector RTR family of instruments is DeFelsko’s state-of-the-art solution for surface profile measurement and more.  Two different probe models are available and selected features are listed below:

• Familiar.  Based on the award-winning PosiTector instrument body platform, the RTR probes are easy to master and use.
• Capable.  State-of-the-art technology with 2 models as follows:
  • PosiTector RTR H.  This 2D version measures surface profile using Testex tape just like a spring micrometer, but with the following enhancements:
    • Automatically compensates for the thickness of the Testex film backing.
    • Using conventional Testex Coarse or X-Coarse tape, the RTR H calculates linearized measurements automatically, without the complicated averaging process required by analog spring micrometers.
    • Stores readings which can be uploaded to PosiSoft, Mac, and smartphone software for professional reporting.  Of course, you can keep the physical replica tape as well.
    • Ready-to-measure.  No calibration adjustment required for most applications.
  • PosiTector RTR 3D.  This 2D / 3D version offers the same features as the RTR H above, but with these extra features:
    • Creates a 3D image of the profile and calculates Peak Density, Peak Count and more – a total of 14 common 2D and 3D surface parameters.
    • When paired with the Advanced body, the RTR 3D can download high-res .SDF files for further analysis.
    • These 3D surface parameters are proving to be as important (if not more so) than traditional surface profile measurements for predicting coating life.  Future proof your instrument purchase against changing specifications by investing in the highly capable PosiTector RTR 3D!
    • Note:  The PosiTector RTR 3D requires Optical grade Testex tape.
• Configurable.  Your choice of RTR probe is available separately (for use with existing PosiTector gage / body), or can be purchased as a kit with your choice of Standard or Advanced body.

Each PosiTector Body / RTR probe kit comes complete with burnishing tool, cleaning cards, check shim(s), calibration certificate, and more!  The RTR 3D package also includes one roll of X-Coarse optical grade tape.

The PosiTest® AT series – DeFelsko’s answer for testing coating adhesion on multiple substrates.  Practical and capable, this product family offers a professional way to conform to recognized standards, including ASTM D4541 / D7234 and ISO 4624.  Highlights are as follows:

• Multiple Versions:
  • Economical Manual hydraulic pump, with new display and internal memory holding up to 200 pulls. Compatible with PosiSoft Desktop.
  • Capable Automatic hydraulic pump, reduces user effort and risk of user influence on result.  Internal memory for up to 100,000 pulls in 1000 batches.   Compatible with PosiSoft Desktop, PosiSoft.net, and PosiTector app
• Versatile.  Both Manual and Automatic versions can be configured for 1 of 4 applications.  And optional conversion kits are available if switching from one application to another is needed.  Application options are:
  • 20mm, Higher bond strength coatings on metals
  • 50mm, Lower bond strength coatings on concrete, wood, and plastic
  • 50 x 50mm Tiles, Cementitious adhesives for tiles
  • 50mm C1583, Concrete surfaces and overlays
• Complete.  Each Adhesion Tester comes with everything needed for testing, including:
  • Selected Instrument
  • Dollies per option selected
  • Batteries
  • Lightweight case
  • Calibration certificate, and more!

Note:  Premium Pelican carrying case optionally available for the Automatic tester.

PosiTest® AT replacement dollies and conversion kits (for using in additional applications) as well as additional PosiTest Adhesive tubes are all separately available.

The PosiTector BHI – DeFelsko’s solution for measuring hardness on hard plastics and soft metals, such as aluminum, copper, brass, and more.

• Familiar.  The BHI probe is interchangeable and compatible with the tried-and-true PosiTector instrument platform.  It is available as a package with either the Standard or the Advanced Gage/Body, or as a probe-only.
• Specialized.  Compares to the 934-1 Barcol Hardness Tester.
• Capable.  Numerous advantages over conventional analog instruments (as well as competitive digital instruments) including:
  • Memory.  Enhances convenience and reliability of reporting by saving readings for archiving or reporting.
  • Reporting options.  The PosiTector BHI includes the PosiSoft suite of software for viewing and reporting.
  • Test Time.  To improve accuracy when testing some materials that continue to deform during the test, the PosiTector Barcol Hardness Impressor offers on-board elapsed time setting capability.

Note:  The PosiTector BHI is factory calibrated. A glass zero-plate is included in the BHI package for use when replacing the indentor, compensating for wear, etc.  A full listing of items included in the probe kit is shown on the brochure under the documents tab.

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.

This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions.

MPN:  HHDHCBRSH5

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, deionized water must be injected under the patch.  These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units.

MPN:  SSTDISPTIP

BlastOne offers all replacement parts for DeFelsko industrial testing equipment on-line for easy ordering, access to instructional material, etc.

This 6″ stainless steel fan brush for the PosiTest HHD series is compatible with the original HHD and the HHD C units, and come standard with each new unit.  It is available as a replacement part here.

MPN:  HHDFANBRSH

BlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more.

These retention fixtures for the PosiTest PC are intended to facilitate proper positioning of the USB cable when loading PC Powder Measurements live into PosiSoft software.

MPN:  PCUSBFIXT

BlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more.

These replacement probe screens for the PosiTest PC are included with each new unit, and are available here as replacement parts.

MPN:  KITPCSCRN

BlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering.

This Belt Clip accessory services the PosiTector 6000 and many other variations.  (See description tab for complete list.)

MPN:  BELTCLIP

Confirm the accuracy and calibration of DeFelsko PosiTest AT Adhesion Testers with this laboratory-quality AT Verifier.

This device works on all pull-off adhesion testers including the AT-M mechanical and the AT-A automatic instrument versions with a range from 0-5000 psi.

MPN:  ATVERIFY

The DeFelsko HHD shoulder strap, which is included in the full HHD kit, is available separately as a replacement item (or as an optional add-on when purchasing the basic HHD kit).

BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.

Replacement Caps for Positector® CMM IS measuring probes are available in packs of 4 or 16.

The use of these caps is important to ensure the integrity of test results and keep the test monitor protected during testing.

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

The PosiTector CMM IS concrete moisture meter platform is expandable, and larger concrete areas can be tested simultaneously in accord with ASTM F2170 standards by increasing the number of in-situ probes. CMM IS Expansion Packs (additional probes) are available singly or in packs of 4 or 16 and each probe includes the following accessories:

• Calibration Check chamber
• Saturated salt solution
• Cap / cover
• 2 stackable probe extensions
• Battery

The DeFelsko® PosiTector® SST Abrasives Test Kit measures soluble salts in blast cleaning abrasives. Designed for compliance with ASTM D4940 and ISO 11127-6, this portable kit includes everything needed to accurately assess contamination levels: two glass beakers, one plastic beaker, a plastic funnel, paper filters, 1L deionized water, 60ml certified conductivity standard, and a stainless mixing rod, all encased in a durable plastic case. Ensure the purity of your abrasives and the quality of your surface preparation with ease.

• Designed for ASTM D4940 and ISO 11127-6 compliance.
• Portable kit includes glass and plastic beakers, funnel, filters, deionized water, conductivity standard, and mixing rod.
• Enables accurate measurement of soluble salt contamination in abrasives.
• Includes certified conductivity standard for meter accuracy verification.
• All components neatly organized in a hard plastic case for field or lab use.

BlastOne offers all DeFelsko testing instruments and consumables with easy, on-line ordering capability.

This product group includes the Li-Ion batteries used in either the PosiTest HHD or the PosiTest HHD C.

BlastOne offers all DeFelsko instruments and accessories on-line for easy access to operation manuals, ordering, and more.

This group of products are stand-alone voltage testers for the High Voltage Holiday Detectors.  Although the PosiTest® HHD units have built-in voltmeters with a traceable calibration certificate, other brands may not, and some standards call for standalone voltmeter verification.

Two versions are available, as follows:

• MPN: HHDVERIFY, for all Pulse-type holiday detectors in the range from 500 to 35,000 volts.
• MPN:  HHDCVERIFY, for all Continuous-type holiday detectors in the range from 500 to 30,000 volts.

Note:  Each unit comes ready-to-use with verifier, 1.8m (6 ft) ground wire, batteries, and more.

BlastOne carries all DeFelsko instruments, accessories, and supplies.

This leather pouch has been specially designed for the PosiTest DFT gauge and economically provides protection for your investment.

MPN:  POUCH-DFT

BlastOne offers all DeFelsko instruments, accessories, and consumables with easy, on-line ordering capability.

This PosiTest® DFT series is a lower-cost design, which provides basic coating thickness measurements for most coatings, but without the memory, connectivity, and other features of the premium PosiTector 6000 series.  Information specific to these PosiTest® Dry Film Thickness gauges is as follows:

• Design:
  • Dedicated and simple, this unit only measures DFT for non-magnetic coatings, without frills and economically.
  • Simple on-board icon-based menu.
• Configurations:
  • Ferrous substrates (only) model (MPN: DFTF)
  • Ferrous / non-ferrous substrates model (MPN: DFTC)
  • Both gages come as a kit with a case, precision plastic shims, Calibration Certificate, and more.

Additional information available under the Description tab.

The PosiTector IRT – DeFelsko’s solution for dedicated, non-contact temperature measurement.  It is rich in features, as follows:

• Familiar.  Built on the tried-and-true PosiTector® platform with the interchangeable probe design.
• Capable.  Works where conventional sensors cannot, it measures surface temperatures  on moving parts, hard-to-reach areas, and objects whose temperatures are higher than the range of direct-contact sensors.
• Economical.  When measurement of other climatic conditions is not required, this PosiTector IRT saves money vs. the higher-featured PosiTector DPM IR.
• Configurable.  Available as follows:
  • Probe-only (use with existing gauge / body)
  • Package with Standard gauge / body
  • Package with Advanced gauge / body

Note:  Each PosiTector package comes complete with probe, protective holster, choice of gage /body, calibration certificate, and more.

Recommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders.

Very easy to use – just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.

Recommended best practice when performing replica tape tests with PosiTector RTR instruments is to thoroughly clean the anvils (test surfaces) before performing the test.

These Cleaning Cards are premoistened with alcohol and are excellent for removing bits of adhesive and debris from the anvils. Each new RTR comes complete with 5 cleaning cards and additional quantities are available here as needed, in packs of 20.

This 15′ (4.5m) connection wire (for the wand or paint pole), which is included with the LPD accessory pack or the LPD Cabled Wand kit, is also available separately here.

MPN:  LPEDREDWIRE

• For enhanced stability on 30-45cm (12-18″) OD pipes
• For PosiTector SPG OS only

• Protective rubber holster for the PosiTector Gage body
• Manufacturer part #BOOTGAGE-G

• Ideal for use on thin, soft coatings
• Pack includes 2 nylon foot rings, instruction card and clear plastic case
• Compatible with all PosiTector 6000 regular separate probes (FS, FTS, NS, NAS, FNS)
• Manufacturer part # PRBFOOTKIT-D

• Use with rolling spring electrodes to precisely locate holidays
• Manufacturer part# HHDPADDLE
• Made in the USA
• Note: Accidental contact with the electrode may result in an electric shock. Use with caution

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

Replacement batteries for the PosiTector CMM IS concrete moisture measuring probes are available in packs of 10.

With a fresh battery, each probe can remain powered for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ.

BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.

Salt solution packets for Positector® CMM IS measuring probes come in packs of 10.

The salt packets are part of the calibration-check process, and are used in the calibration container.

MPN: CMMISSS10PK

Extensions are used to extend the reach of the DeFelsko CMM IS concrete measuring meters.  Each new meter comes standard with 2 extensions, allowing testing for a 4 inch concrete slab.  Thicker slabs may require these extensions to obtain accurate test results, and are available separately in packs of 10.

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

The PosiTector Surface Profile Gauges have replaceable tungsten carbide tips and are available as follows:

• 60° Angle for ASTM (USA) applications, used in the Integral, Standard Cabled, and Convex Cabled probes.
• 30° Angle for AS 3894.5-C (Australia) applications, also used in the Integral, Standard Cabled, and Convex Cabled probes.
• CS Tip for Textured Coatings probes.
• TS Tip for Concrete Surface probes.

These tips ensure accurate measurement of surface profile and should be replaced when worn.

Each tip includes a tool to facilitate replacement.

Use with the PosiTest® DT. Includes the following: 

• Dust Test Comparator (1)
• Transparent Display Board (1)
• Report Forms – Pack of 25 (4) 

Replacement blades for PosiTest® PT Pencil Sharpener 

• Quantity of 10

• Purified, ion-free water to be used with the PosiTector SST
• Available in 250ml or 1L bottles
• Manufacturer part#’s SSTDIWATER / SSTDIWATER1L

Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, wind speed, and difference between surface and dew point temperatures.

PosiTector DPM standard gauge bodies include…

• Larger 2.8″ impact resistant color touchscreen with redesigned keypad for quick menu navigation
• Weatherproof, dustproof, and water-resistant—IP65-rated enclosure
• Fast response precision sensors provide accurate, repeatable readings
• Auto Log mode records environmental parameters at user selected time intervals
• PosiTector interchangeable platform — attach any PosiTector probe to a single gauge body

• Turns your cell phone or tablet into a virtual PosiTector gauge
• Accepts coating thickness, environmental and surface profile probes
• Mobile integration operates via bluetooth – no internet connection required
• Kit includes holster with belt clip, wrist strap, PosiTector app, batteries
• Probes purchased separately

• Protects gage, probe and accessories during storage and transportation
• Made of durable nylon
• Manufacturer part #CASENYLON-G

• For use with the PosiTector SmartLink 

• For use with the Positector® 200 and PosiTector® UTG 
• Every 200 and UTG ships with one (1) bottle of ultrasonic couplant
• Available in twin pack or case of 12
  • 4oz bottles
• MPN: GEL_P  and GEL_T
• Made in the USA

• For use with the PosiTest HHD
• Attaches to the Spring Connector via thread onto rolling springs
• Manufacturer part# HHDCOUPLER
• Made in the USA

NOTE: Two pre-installed spring couplers included. Not intended for connecting multiple rolling spring electrodes together

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

The PosiTector SST Bresle disposable test patches require hypodermic needles for use.  These replacement needles come in a pack of 10 and are readily available here.

The PosiTest® HHD – DeFelsko’s solution for detection of holidays, porosity, pinholes, leaks and other discontinuities in coatings and linings that are more than 10 mils (250 microns) thick.

• Advanced pulse or continuous DC technology
• Lightweight and ergonomic design
• Auto voltage calculator based on coating thickness
• Multiple electrode options with custom availability
• Long Form Certificate of Calibration included

Available in 4 Kit options as follows: 

• PosiTest HHD Kit (2 versions)
  • Stick-type with Pulsed DC Output
  • 72 Wh Li-ion battery pack with built-in charge indicator 
  • Durable Pelican Storm Case
  • 20″ Electrode Rod (or substitute 5″ Electrode, with suffix -S after the part number)
  • Shoulder Strap
  • 25′ earthing cable and smart charger with universal AC voltage input
• PosiTest HHD Basic Kit (same as above HHD kit except for the following)
  • 36 Wh Li-ion battery pack instead of 72 Wh
  • Hard Shell Case instead of Pelican Case
  • 5″ Electrode Rod
• (Note – the above HHD instruments can be converted to wand configurations, aiding in testing hard-to-reach areas, by adding the optional HHDWAND Handheld Wand.)
• PosiTest HHD C Kit
  • Wand-type with Continuous DC Output
  • 18650 Li-ion Batteries (4)
  • Hard Shell Case
  • Extension rod is not required, but available

Several options are available for PosiTest HHD instruments, including:

• Rolling Spring Electrodes, and Conductive Paddle to aid in precise location of holidays
• Flat Wire Brush Electrodes
• Half-Circle Brush Electrodes
• Electrode Adaptors, makes other brands of electrodes compatible with the HHD
• Electrode Rods (for HHD) and Extension Rod (for HHD C)

Note:  For coating thicknesses between 0 and 20 mils (0-500 microns), the PosiTest LPD is recommended.

BlastOne offers all instruments and accessories from the DeFelsko product line.

These rolling springs are the electrodes suited for DeFelsko® high voltage holiday detection on steel pipes, and additional information is as follows:

• Multiple sizes available, 4-36″
• Each electrode includes two pre-installed spring couplers. Replacement couplers are available in packs of 2.
• Requires one Spring Connector to connect either DeFelsko or SPY spring electrodes to PosiTest HHD (sold separately).
• Sold Individually

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, deionized water must be injected under the patch.  These replacment syringes are available as replacements in this convenient package of 10 units.  The plastic or metal needles are available separately depending on which test patch system is used.

MPN:  SSTSYRINGE3

BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.

The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7.  This Kensington lock provides security, helping to ensure that the valuable instrument remains secure.

MPN:  DPMLLOCK

BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.

The DPM L PosiTector Dew Point Meter Logger uses (2) lithium CR 2032 coin-type batteries.

Replacement batteries are available in packs of 5 here.

MPN:  DPMLBAT

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

The PosiTector® DPMS version (only) in the Dew Point Meter family of probes has the unique capability of accepting these two optional accessories, which are:

• PRBDPMHSP, Hand-Held Surface Temperature Probe, for spot checking hard-to-reach surfaces
• PRBDPMLTP, Liquid Temperature Probe, for checking the temperature of paint and other industrial liquids

Peak-to-valley height (aka Surface Profile) is a critical measurement for calculating expected coating performance, meeting coating manufacturer specifications, and estimating coverage requirements. Measuring surface profile has been done successfully for over 50 years with the Testex replica tape and spring micrometers. DeFelsko offers multiple Analog options for these spring micrometers (aka Snap Gages, or Dial Thickness Gages), as follows:

• Certified.  Available in:
  • Imperial / Mils
  • Metric / Microns
• Non-Certified.  Available in:
  • Imperial / Mils
  • Metric / Microns
  • Linearized in Mils
• Package Options.  Available as:
  • Basic Micrometer kits (aka Dial Thickness Gage Micrometer), including choice of snap gage, plastic burnishing tool, carrying case, instructions & 1 year warranty.
  • Complete kits (aka Replica Tape Kits), including Basic kit above as well as Training Surface Tool, and 1 roll each of Testex Press-O-Film Coarse and X-Coarse tapes.
• (Digital Replica Tape Readers also available, see details on their separate page.)

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy access to ordering, operational manuals, etc.

These flat wire brushes are the electrodes suited for PosiTest HHD high voltage holiday detection on flat surfaces.  Additional information is as follows:

• Multiple sizes available between 2 – 48″ wide (51 to 1219 mm)
• Flat wire brushes do not require couplers or spring connectors like the rolling spring electrodes do.  Each brush is supplied ready-to-use.
• Sold individually.

Drilling template for 50mm dollies to isolate test area.  Ideal for thicker coatings on concrete.  Includes (10) 5/32″ (4mm) drill bits.

For use with PosiTest AT.  MPN:  TMPLTAS

BlastOne offers all DeFelsko testing equipment, accessories, and supplies.

Pinhole detectors (aka Spark Testers) such as this PosiTest® LPD, detect holidays, pinholes, and other discontinuities on metal and concrete substrates. 

The DeFelsko LPD Low Voltage series is designed for coating thickness up to 20 mils.  Some of the features include:

• GroundSense™, to visually confirm instrument is properly grounded
• 4 voltage operation ranges
• Weatherproof, dustproof, and shockproof
• Long Form Certificate of Calibration included

2 stick kit versions available as follows: 

• PosiTest LPD Basic Kit 
  • Base Tube
  • 3 AAA Batteries
  • Rectangle Sponge Hardware 
  • Rectangle Sponge
  • 15′ (4.5 m) Ground Wire
  • Insulating Collar 
  • Ear Bud
  • Wrist Strap
  • Carabiner
  • Hard Shell Case
• PosiTest LPD Complete Kit
  • Includes all contents of Basic Kit, plus: 
    • Adaptable Sponge Hardware
      • Rectangle (Flat)
      • Roller
      • Internal Diameter
      • Additional 8″ x 8″ (20 cm x 20 cm) Sheet Sponge for custom usages
      • Wetting Agent
    • Extension Accessories
      • Extension rods provide an additonal 2′ (0.6 m) of reach
      • Universal adapters to extend existing paint rollers and poles
      • 40′ (12 m) Ground Wire
      • 15′ (4.5 m) Hot Wire
      • Magnetic Grounding Post

Note:  We also carry Defelsko HHD High voltage holiday detectors for work on thicker coatings from 8 mils and up.

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements.  These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units.

MPN:  SSTSWAB

BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.

Replacement Probe Extraction Tools for Positector® CMM IS measuring probes come in packs of 3.

The use of this tool helps facilitate the removal of the probe when testing is complete.

MPN: CMMISTOOL3PK

• 17″ Rod
• For use with PosiTest HHD C
• Genuine DeFelsko product

These kits determine the film hardness by pencil test (Wolff-Wilborn). Options as follows: 

• PosiTest® PT Basic Kit 
  • Graphite Pencils – 6B to 6H (14)
  • Custom Aluminum Pencil Sharpener 
  • Grit Sandpaper – pack of 400
  • Instructions
• PosiTest® PT Complete Kit
  • Graphite Pencils – 6B to 6H (14)
  • Custom Aluminum Pencil Sharpener 
  • Grit Sandpaper – pack of 400
  • Instructions
  • Pencil Cart with Leveling Rod
  • Hard Shell Carrying Case
• PosiTest® PT Pencil Cart (only)
  • Optional
  • Exerts a constant force of roughly 1.65 lbf at the specified 45° angle (included with the Complete Kit)
  • Leveling rod ensures the cart is parallel to the surface
  • Thumbscrew allows for quick and easy pencil changes

Replacement pencils are available as a complete set of 14 or as a pack of 12 for individual hardnesses. Pencil variations as follows: 

Surface Profile Standards and Shim Sets are used for checking and adjusting calibration on PosiTector SPG, PosiTector RTR (and other depth micrometer probe) instruments.  Product details as follows:

• For the PosiTector SPG:
  • Certified Standards.  Typically used in calibration labs, these are available for any user who desires this level of verification.  Includes serialized and traceable height standards mounted to a metal plate.  Labeled in both metric and imperial units.
  • Certified Shim Set.  Premium option for everyday use with any depth micrometer using a fine-pointed probe (as well as the PosiTector SPG).  Includes 3 shims at 50/125/500 microns (2, 5, 20 mils).
  • Zero Glass Plate / Metal Shim (Non-Certified).  For training and quick checks for accuracy, each new SPG unit comes with this verification set, with replacement / additional units also available for purchase here.
• For the PosiTector RTR: (both models unless otherwise noted)
  • Certified Shim Set.  Premium option to check Peak Height measurements for accuracy verification on the RTR series (as well as other spring micrometer replica tape readers).
  • Non-Certified Shim Set (aka Precision Plastic Shim Set). Lower cost version of the above, ideal for everyday accuracy verification.
  • Single Check Shim.  This non-certified shim comes standard with each new RTR and is available as a replacement if desired, although it is more economical to purchase the above full set.
  • Check Tape.  This reusable tape is used to verify Peak Density, and is used on the RTR 3D model only.

The Testex tape process of measuring surface profile has been used for over 50 years.  It is a simple, reliable, and repeatable way of determining surface profile parameters.  DeFelsko acquired the Testex tape line and incorporated it into their range of instruments, for increased compatibility and greater convenience for inspectors.

Tape options include the following:

• Conventional Testex Press-O-Film Tape grades.
  • Use with analog spring micrometers or with the PosiTector RTR H probe.
  • Available in 4 versions:
    • Coarse Minus.  (for 0.5 – 1.0 mils / 12 – 25 µm)
    • Coarse.  (for 0.8 – 2.5 mils / 20 – 64 µm)
    • X-Coarse. (for 1.5 – 4.5 mils / 38 – 115 µm)
    • X-Coarse Plus (for 4.6 – 5.0 mils / 116 – 127 µm)
• Optical Grade Testex Press-O-Film Tape Grades
  • Use with PosiTector RTR 3D probe.  Provides higher quality surface data files (.sdf) than conventional replica tape.  Available in 2 versions.
    • Coarse (for 0.8 -2.5 mils / 20 – 64µm)
    • X-Coarse (for 1.5 – 4.5 mils / 38 – 115 µm)