Search: schmidt axxiom

Enhance your blasting efficiency with the Schmidt® MicroValve Abrasive Metering Valve (SKU: P-GV2125). Designed for precise abrasive flow, this rugged valve ensures optimal sandblasting media use.

• The MicroValve™ changed the industry by providing accurate metering valve
• Simple screw type metering through a low-wearing valve
• 1 ¼” (32 mm) thread abrasive inlet port
• Hardened steel threaded base nipple
• Sold Individually, Brass Coupling not included
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• Service Kit for the 1-¼ (32mm) and 1-½ (38mm) Auto Air Valve
• Used to rebuild the Auto Air Valve in the field
• Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
• Replace seals at the first sign of wear

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Compact contractor size, highly portable with good productivity for smaller projects
• When using premium garnet media, this pot will last for up to 1 hour before you need to refill
• Capacity of 3.5 cu ft, which equates to about 500 pounds of dense media like premium GMA garnet
• Pressure Rating: 150psi

Sold as a Kit which Includes:

• Blast Pot
• Deadman Control System with 50 feet of control line and handle
• Choice of inlet fitting in either 4-claw or Spud type.  Spud will be supplied unless otherwise noted in order comments field.

Genuine Products – Manufactured by Schmidt® /Axxiom Manufacturing

• Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
• Used when an overhead hopper automatically feeds abrasive into a blast machine.
• Rugged stainless steel body, compact, isolated 2-bolt construction.
• Doubles blast machine refill cycle time.
• Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
• Set and forget – flow rates stay set where you put them.
• High wear, rugged plunger seal.
• Stainless steel body for long life.
• Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
• Fit a rebuild kit while the valve is still fitted to the blast machine.
• Sold individually.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Blasting rate up to 20 ft² per hour.  Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
• Utilizes the TeraValve XL abrasive metering valve
• Compressed Air Requirement is only 185 cfm
• Has wheels and fork pockets for easy portability by hand, or by forklift.
• 100% compressed air powered – no electricity required
• Various workheads are available for flat surfaces, inside corners, outside corners, etc. – enquire for details.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

Upgrade your blast machines with the Replacement Bronze Element for Brass Inlet Strainer. Expertly designed by Schmidt® – Axxiom Manufacturing to strain out dust and grit from control lines.

• Perfectly fits the Brass Inlet Strainer on blast machines.
• 90 Micron Bronze Element designed to sieve out dust and grit effectively.
• Simple and straightforward replacement process.
• Authentic part crafted by the trusted Schmidt® – Axxiom Manufacturing.

Elevate your production blasting with the Schmidt® AirPrep Deliquescent Desiccant Air Dryer, an industry-standard moisture removal system that uses Deliquescent tablets to absorb moisture for cooler, drier blasting. Experience enhanced efficiency, including 15% faster blasting, while saving on abrasive costs, all achieved through this rugged, skid-mounted system. Tailored to your needs with a range of sizes based on your compressor’s CFM, this galvanized desiccant tank ensures easy maintenance and longevity, promising optimal performance even in high humidity environments and temperature fluctuations.

• The Premium Industry Standard Air Dryer
• Uses Deliquescent tablets to absorb moisture from the blasting air
• Pneumatic Fan motor with Easy Maintenance
• Galvanized Desiccant Tank lasts 5x longer then all competition
• Select size based on the CFM of your compressor
• Come fitted with 4-claw fittings
• 5 year warranty
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing
• ACSD250 / ADS250, ACSD400 / ADS400, ACSD750 / ADS750, ACSD950 / ADS950, ACSD1200  / ADS1200, ACSD1600 / ADS1600

The Axxiom TeraValve – the next generation abrasive metering valve for blast machines with pressure-hold technology.  Featuring:

• Extended Life.  Schmidt XL technology utilizes tough metal alloys and internal wipers, reducing premature wear due to dust migration.
• Easy Interchangeability.  Customers with older Thompson valves that need rebuilt have an easy alternative.  Exchange the old valve with a new TeraValve with no modifications required!
• Efficient.  Pressure-hold design maintains pressure in the pot, even with deadman released.  This can save up to 15% of abrasive when your projects involve a lot of start-stop blasting.  Reduces expensive compressed air consumption too!
• Economical.  The compact design of the TeraValve actually costs less than the previous-gen Thompson II valve.
• Available for more applications.  Pressure-release pots with limited clearance (where traditional Thompson Valves do not fit) can also benefit. Efficient pressure-hold technology can be used on any blast pot with a minimum of 6″ clearance by installing a TeraValve retrofit kit.  
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

Note:  Diaphragm-activated piston requires minimum of 75 psi control pressure

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Manufacturer Warranty

• 10 cu ft Schmidt® Blast pot
• Excellent for a blastroom application with 1-2 blasters
• Single outlet Thompson® Valve II abrasive metering valve, Dual available
• Abrasive capacity
  • Garnet 1500 lbs
  • Steel Grit 2450 lbs
• Comes with pneumatic deadman handle and 55ft of control hose, Electric available

Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing to BlastOne specifications

FREE Shipping 

30 Day Money-Back Guarantee | Free Returns 

90 Day Manufacturer Warranty

• 1.5 cuft capacity – easily portable but with the same industrial grade construction as its larger siblings
• Full industrial working pressure range of 150 psi (10.3 bar) 
• Offers the same industrial abrasive metering valves as its larger siblings – the TeraValve, Thompson II, and MicroValve
• Comes with moisture trap and 1″ Piping 

Genuine Product – Manufactured by Schmidt®/Axxiom Mfg.

FREE Shipping

30 Day Money-Back Guarantee|Free Returns

90 Day Manufacturer Warranty

• Most common contractor size, combining portability with productivity
• When using premium garnet media, this pot will blast for around 1.5 hours before you need to refill
• Capacity of 6.5 cu ft, which equates to 950lbs of a dense media like premium GMA Garnet
• Pressure Rating: 150psi

Sold as a Kit which Includes:

• Blast Pot Deadman Control System with 50 feet of control line and handle
• Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field

BLAST HOSE SOLD SEPARATELY

Genuine Products – Manufactured by Schmidt® /Axxiom Manufacturing

For rental or purchase

From gaskets and crabs to covers and bolts, BlastOne has all the replacement parts you need to repair the Handhole / Manway access panels for Axxiom / Schmidt blast pots. 

• Special note:  Be sure to try out the SureFit™ Handway gasket for the 6.5 pot.  It makes installation much easier & faster.  Lasts longer too! 
• Note:  Versions of these access assemblies have changed over the years.  If any doubt which version you need, send us the model year and serial number of your blast pot to confirm the correct part before ordering.

• Premium Deadman Technology
• Comfortable to hold – increases operator compliance
• Available as Electric or Pneumatic in 2 configurations each:
  • 2-position (on/off) version 
  • 3-position version with the following:
    • Position 1 – Air Off / Abrasive Off
    • Position 2 – Air On / Abrasive Off (for blowing off)
    • Position 3 – Air On / Abrasive On (for blasting)
• This handle can be used with any blast control setup, but comes standard with each new BAABS deadman system purchase – see here for the main BAABS page.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

Ensure the smooth operation of your Pneumatic Response Deadman Handle with the “Response Deadman Service Kit” (SKU: DM226300299). This complete kit features genuine parts by Schmidt/Axxiom Manufacturing for efficient in-field repairs.

• Suits Pneumatic Response Deadman Handle
• Complete Service Kit to enable in-field repair of Deadman Handle
• Sold as a Kit including;
  • Shuttle Valve
  • Spring
  • Replacement Plug
• Genuine Parts – Manufactured by Schmidt / Axxiom  Manufacturing

The Thompson I Valve was invented by Bob Schmidt and was instrumental in causing the popularity of pressure hold technology.

• Pressure-hold systems retain the pressure in the blast pot until the deadman handle is depressed.  This reduces abrasive and energy waste.
• The Thompson I offers fine control for abrasive metering
• It comes in 3 nipple size configurations:
  • 1 ¼” (32 mm) x 1 ¼” (32 mm)
  • 1 ½” (38 mm) x 1 ½” (38 mm)
  • 2″ (50 mm) x 2″ (50 mm)
• Threaded-plunger metering design with air actuated operation
• Fits most sand blast hoppers, blast pots or abrasive blasting machines
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

Note:  The Thompson I valve, while still available, has become less common. The more modern Thompson II valve or state-of-the-art TeraValve are more popular and can replace the Thompson I without any modifications.

• Genuine OEM Replacement Parts Kit (Seals Only) for MicroValve 3
• Sized at 1-1/4 x 1-1/2” (32 x 38mm), ideal for MicroValve 3 abrasive metering valve
• Included plunger seal to prevent abrasive media from leaking
• Polyurethane sleeve for protecting the plunger against wear and tear
• Included O-ring to effectively seal the valve and prevent leaks
• Ball seat for managing the flow of abrasive media
• Economical solution to prolong the lifespan of your MicroValve 3

• Suits Pneumatic Blast Pot Control Valve DM2229000
• Service Kit is used to keep your blast pot operational
• Sold as a Kit containing;
  • Piston
  • Spring
  • Replacement O-rings

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Smallest production style pot available
• The 0.9 cuft capacity will hold 140 lbs of Garnet
• Ideal for in-plant or onsite touch up work
• Comes with Schmidt TeraValve™ Metering Valve
• Unit includes 25′ blast hose with trigger deadman, 1/8″ nozzle and twinline
• Comes with moisture trap
• 3/4″ Piping

Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

For rental or purchase

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Unique!  Dual Outlet for 2 operators, in a short configuration for easy loading.
• Only 46 inches tall!  Shorter than a standard 6.5 pot.
• Capacity of 11 cu ft, which equates to 1600lbs of a dense media like premium GMA Garnet
• Pressure Rating: 150psi
• TeraValve pressure-hold metering valves

Sold as a Kit which Includes:

• Blast Pot
• Pneumatic Deadman Control System comes with 2 sets of 50 feet of control line and handle
• Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field.

BLAST HOSE sold separately

Genuine Product – Manufactured by Schmidt® /Axxiom Manufacturing

BlastOne has the parts needed to service and maintain all Axxiom / Schmidt blast pots.  The following are the common Pop Up components – contact us if you do not see the version you need.

Pop-up Valve and Shaft (aka Pop-up Head)

• Hemispherical pop-up valve seals off pot when pressurized
• Shaft is embedded in the urethane head
• Suits Schmidt’s contractor series blast pots
• Available in the following:
  • MPN 2100-000, Small, for 1.5 CF pots
  • MPN 2100-010, Standard, for 3.5, 6.5, 10, & 20CF pots
  • MPN 2100-010-04, Alternate for Standard sizes, designed for high flow

Seating Ring

• Available in the following:
  • MPN 2100-001, Small, for 1.5 CF pots
  • MPN 2100-011, Standard, for 3.5, 6.5, 10 & 20 CF pots
  • MPN 2100-011-04, “Sure-Seal” Alternate for standard sizes, good when applications include blasting at low pressures.  Use with 2100-010-04 pop-up head.

• OEM Replacement Spring for TeraValve™ XL
• Schmidt® / Axxiom part # is 2130-000-03

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• The most versatile, easy-to-regulate dry blast machine on the market
• 10-150psi blasting pressure range
• With a load skid combined with an inlet filter, this product uses a differential pressure gauge to allow accurate “metering” of hard-to-flow abrasives like Soda and fine Garnets
• With regulators for the blast and tank pressure for accurate control, this product can be used with most abrasive types – fine to coarse
• With the addition of a media vibrator to improve light media flow and an easy-to-use media shut-off valve this unit is perfect for graffiti removal and all other types of soda blasting
• G2 pneumatic deadman control, 55′ twinline control hose, 55′ water line with wet blast attachment for dust suppression included with purchase

Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• TeraValve™ Complete Blast Pot Retrofit Kit
• Allows you to completely retrofit your existing blast pot into the latest pressure-hold technology
• Reduces abrasive consumption up to 15% compared to pressure-release systems, depending on application.
• TeraValve™ is designed to last with stainless alloy construction and internal dust wipers
• Sold as a kit with all parts, fittings and instructions required for installation
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing
• Kit pictured is 1-1/2″ Airlines, Electric Deadman – most common

• OEM Replacement Urethane Seat for Thompson Valve 1
• This is one of the most common wear items, and easily replaced
• Schmidt / Axxiom part # 2149-000-10

• Replacement OEM Plunger Seal suit TeraValve XL
• Pack of 10
• Schmidt / Axxiom Part # 2130-000-08

BlastOne has stock of the Axxiom replacement parts you need to keep your valves operating. These are the pipe nipples for the MicroValve III. 

• 1-¼” MNPT x 1-½” MNPT, MPN 2128-007-10
• 1-½” MNPT x 1-½” MNPT, MPN 2128-008-10
• Hardened Steel for extended durability
• Genuine Schmidt / Axxiom Parts

BlastOne stocks the Axxiom replacement parts you need to keep your valves operating.  These are the bottom base pipe nipples for the Thompson II metering valve: 

• 1″ x 1″, MPN 2152-000-19
• 1-¼” x 1-¼”, MPN 2152-000-15
• 1-½” x 1-½”, MPN2152-000-11

• Conversion kit for DM2229100 Electric Control Valve
• Installs between twinline and inlet valve
• Provides sharp, clean and rapid deadman response
• Improves safety
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve

• Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
• Designed to handle the harshest blasting environments known
• Will handle up to a 3/4″ blast nozzle
• Will work with any abrasive, including very fine/dusty abrasives
• Most rugged and reliable valve for any application
• Sold Individually
• Genuine Parts – Made in USA by Schmidt / Axxiom Manufacturing

• ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
• This System changes the depressurization flow of the air in the blast hose
• Allows a 200ft blast hose to depressurize in less than 1 second
• Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
• Saves Seconds – Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
• Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Versatile!  No need to have separate wet and dry blast equipment.  Wet blast or dry blast with a single unit
• Minimal water usage (less than 1 pint / ½ litre per minute) with proprietary Schmidt M.I.S.T.™ technology that allows precise control of the amount of water injected into the air stream while blasting
• Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
• Schmidt TeraValve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
• Wide range of blasting pressure capabilities from 10 to 150 psi
• Toggle between wet blast, dry blast, wash-down and blow-off using a single control panel
• This version has a 3.5 C.F. capacity.  Other sizes are available upon request – enquire.

Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• OEM Replacement O-Ring suit Schmidt Tungsten Carbide Sleeve
• Schmidt / Axxiom part # 2152-000-21

• Industrial-Grade Muffler for Pressure-Release Blast Pots
• Safer and much longer lasting than ‘throw-away’ mufflers
• Reduces blow-down noise to approx. 110 dB.
• Intercepts abrasive that may otherwise escape when depressurizing
• Sold as a Field-Installable Retrofit Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Attaches to Combo Valve)
  • Any required fittings
  • Does not include a new Blow Down hose
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt
• Note:  This muffler comes standard on Schmidt combo-micro blast pots from BlastOne.
• Also available for Pressure-Hold systems here

• Replacement Nut suit Thompson® Valve 1
• Sold individually
• Schmidt / Axxiom part #

• Replacement Diaphragm for TeraValve™ XL
• Schmidt® / Axxiom part # 2130-000-04
• NOTE – this part is included in the TeraValve Rebuild Kits

• Replacement TeraValve™ XL™ Knob
• These knobs are blue
• Schmidt® / Axxiom part # is 2130-000-01

• Replacement OEM Body for TeraValve™ XL
• Cast Stainless Steel
• Schmidt® / Axxiom part # 2130-000-11

• OEM Replacement Cap Gasket for Thompson Valve II
• Recommend to replace whenever the cap is removed
• Schmidt / Axxiom part # 2152-000-16 
• Package of 10 gaskets

• Replacement Tungsten Carbide Sleeve for TeraValve™ XL™
• Includes O-Ring & Internal Wipers
• Schmidt® / Axxiom part # 2130-000-07

• OEM replacement Body for the MicroValve® 1
• Schmidt® / Axxiom part # is 2125-000-06.

• OEM Replacement Cylinder for Thompson Valve 2
• This is the section of body that the cap bolts to and the piston rides in
• Schmidt / Axxiom part # is 2152-000-09

• OEM Replacement Metering Spring suits Thompson® Valve II
• Schmidt® / Axxiom part # 2152-000-03

• OEM Replacement Cap for Thompson® Valve 1
• This is the part that bolts to the body and the knob bolts into at the top
• Schmidt® / Axxiom part # 2149-000-02

• OEM replacement Cap for the MicroValve® 1.
• To connect Body & Plunger
• Schmidt® / Axxiom part # is 2125-000-02.

• Replacement Urethane Sleeve for MicroValve® 1 Urethane Sleeve
• Preferred for use with Fine Garnet or other super fine medias
• Schmidt® / Axxiom part # 2125-100-08

• OEM Replacement Cylinder for Thompson® Valve I
• Also know as the Body for a Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-09

• OEM MicroValve®II Plunger
• Tungsten Carbide wear point
• Schmidt® / Axxiom Part # 2127-000-05

• OEM Rebuild Kit for TeraValve™ XL
• Includes Tungsten Carbide Sleeve & Plunger along with Seal kit
• Schmidt® / Axxiom part # 2130-000-99
• Includes: GV213000004, GV213000006, GV213000007, GV213000008, GV213000009, GV213000010

• OEM Complete Rebuild Kit for Thompson® Valve II XL™
• Replacement Plunger, and Sleeve (w/ Wiper), Replacement Seals and O-Rings
• Schmidt® / Axxiom part # 2153-000-99

• OEM Repair Kit for TeraValve XL
• Replacement Diaphragm, Seals, & O-Rings only
• Schmidt / Axxiom part # 2130-000-98
• Includes: GV213000004, GV213000008, GV213000009, GV213000010

• OEM Replacement Seals Kit for Thompson® Valve II XL™
• Replacement Seals / O-Rings only
• Schmidt® / Axxiom part # 2153-000-98

• OEM Replacement Urethane Sleeve suit Thompson® Valve I
• Urethane composition means it’s high-wear in normal applications, but sometimes the only option for a recycled abrasive or super fine abrasive
• Schmidt® / Axxiom part # is 2149-100-13

• OEM Replacement O-Ring for Thompson® Valve I
• Sits on the bottom of the Insert beneath the Tungsten Carbide Sleeve
• Schmidt® / Axxiom part # 2149-000-18

• OEM Plunger for the MicroValve® I.
• Wear point is Tungsten Carbide.
• Axxiom / Schmidt® part # is 2125-000-05.

• OEM Replacement Sleeve for Thompson® Valve I
• Tungsten Carbide construction means you get significantly improved wear life
• Not suited to superfine medias, or abrasive being recycled without a proper recycler – suggest Urethane Sleeve (GV214910013)
• Schmidt® / Axxiom part # 2149-000-13

• OEM replacement Roll Pin for the MicroValve® 1.
• Holds the Knob to the Plunger
• Axxiom / Schmidt® part # is 2125-000-04.

• OEM Replacement Plunger Seal for MicroValve™ 1 / Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-06

• OEM Replacement Plunger suits Thompson® Valve I
• Wear surface is made of Tungsten Carbide for increased life
• Schmidt® / Axxiom part # is 2149-000-07

• OEM MicroValve™ 1 Pipe Nipple 1 1/2″ MNPT x 1 1/2″ MNPT
• Made of Hardened Steel
• Schmidt® / Axxiom Part # 2125-008-10

• OEM Replacement Plunger for Thompson Valve 2
• Tungsten Carbide wear surface for long life
• Schmidt / Axxiom part # 2152-000-07

• Replacement Polyurethane Cleanout Plug for Microvalve® 3
• Bolts to Body, no threads
• Schmidt® / Axxiom Part # 2128-000-18

• Replacement Sleeve O-Rings for TeraValve™ XL™
• Pack of 10
• Schmidt® / Axxiom part # 2130-000-09

• Blue OEM replacement knob for Microvalve® 2 and Microvalve® 3
• Schmidt® / Axxiom part # 2128-000-01

• Replacement OEM Vibration Disc suit TeraValve™ XL™
• Comes in a pack of 10
• Schmidt® / Axxiom part # 2130-000-15

• Replacement TeraValve™ XL Cap
• Top part of the TeraValve™, between the Knob and Body
• Schmidt® / Axxiom part # 2130-000-02

• Orange OEM replacement Knob for the MicroValve® 1.
• Axxiom / Schmidt® part # is 2125-000-01.

• OEM Replacement Body for Thompson Valve 2
• This houses the Sleeve, Plunger and their accompanying parts, which are not included
• Schmidt / Axxiom part # 2152-000-14

• OEM Replacement Vibration Disc suit Thompson Valve 2
• This disc prevents accidental adjustment of the abrasive control knob by vibration, ensuring consistent media flow
• Schmidt / Axxiom part # 2152-000-25

• OEM Replacement TC Insert for Thompson® Valve I
• This is used in conjunction with the Tungsten Carbide Sleeve
• Schmidt® / Axxiom part # 2149-000-14

• Replacement Piston for Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-05

• Will transform your blast pot into a pressure hold system
• Retrofit Kit includes:
  • Thompson® Valve Series II Metering Valve
  • Full pusherline kit
  • Automatic air valve and all interconnecting hoses
  • Control line strainer and control valve
  • Response deadman handle and Twinline
  • Does not include muffler or pressure relief valve pictured
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

• OEM Replacement Base for Thompson® Valve I
• This is the part that bolts to the body, and houses the pipe nipple
• Schmidt® / Axxiom part # is 2149-000-11

• OEM Seals Kit for the Thompson® Valve I
• Replacement Seals / O-Rings only
• Schmidt® Axxiom part # 2149-000-98
• Includes: GV214900004, GVGV214900006, GV214900010, and GV214900018

• Replacement Piston Seal for Thompson Valve 1
• Schmidt / Axxiom part # 2149-000-04

• OEM Replacement Spring for Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-03

• OEM Complete Service Kit suit MicroValve® 1
• Schmidt / Axxiom Part # 2125-100-99
• Includes 1 (ea) of GV212500004, GV212500005, GV212500009, GV212510008, and GV214800006

• OEM replacement Gasket for the MicroValve I.
• Goes between the Base Pipe Nipple and the Body
• Schmidt / Axxiom part # is 2125-000-09.

• OEM Replacement Knob for Thompson® Valve I
• These knobs are Red
• Schmidt® / Axxiom part # 2149-000-01

• OEM Replacement Seals Kit suit MicroValve™ 1
• Schmidt® / Axxiom Part # 2125-100-98
• Includes 1 (ea) of GV212500009, GV212510008, and GV214800006

• OEM Replacement O-Ring suit Spring Retainer in the Cap
• Schmidt / Axxiom part # 2152-000-18

• OEM Replacement Piston suit Thompson Valve 2
• Rides in the upper section (Cylinder – GV215200009) of the Thompson 2, and lifts the plunger (GV215200007)
• The Piston seal (GV214900004) is the most relevant repair item.
• Schmidt / Axxiom part # 2152-000-05

• OEM Replacement Plunger Seal for Large Bore Thompson I, Thompson II, MicroValve II, and MicroValve III valves
• Schmidt / Axxiom part # 2149-500-06
• Note – this product is replacing the purple GV215200006 seal
• Note – this product is also included in the relevant seal kits

When Axxiom released the Thompson 2 valve, the benefits of Pressure-Hold technology were instantly upgraded by improved user experience over the Thompson I valve.  Details as follows:

• Improved servicability:
  • Body and cylinder are now 2 parts, providing easier removal of sleeve and plunger.
• Additional Seal protection:
  • Has 3 separate seals (versus the original 1), reducing dust migration and improving durability.
• Multiple Sleeve choices:
  • In addition to the original Tungsten Carbide and Urethane full-flow options, Axxiom has released additional options that help prevent over-consumption in various applications.
• Virtual Position Indicator:
  • Simplifies setting of the media flow rate.
• Cleanout:
  • Full 1″ port directly under the inlet allows cleanout without removing the valve.
• Size info:
  • Standard 1-¼” (32 mm) inlet thread
  • 4 choices of MNPT piping for pusher-line connection
    • 1″, 1-¼”, 1-½”, and 2″
• Options:  Make servicing the valve even more convenient with one of the following:
  • Union-End Ball Valve – The UEBV allows removal of valve without emptying the pot.
  • Tri-Clover Quick Connect – allows removal of valve without tools.
  • Combination UEBV and Tri-Clover – combines the benefits of both options at a reduced cost.

Meter your abrasive efficiently and conveniently with the genuine Axxiom Thompson II valve!

• Suits Axxiom/Schmidt Moisture Separators
• Genuine OEM Part
• AFMSH800 and AFMSH1600
• Often purchased with BA7032005 Handle Bar Grip

AVAILABLE FOR RENTAL OR PURCHASE

• #1 Deadman in the industry
• Larger internal ports make it faster acting, making it a safer handle
• Compact, slimline design – 30% easier then other handles to hold down
• Simple to make in-field repairs as required
• Available as Electric or Pneumatic
• Geniune Products – Manufactured by Schmidt / Axxiom Manufacturing

BlastOne has replacement parts for all Axxiom / Schmidt metering valves.  This group includes the various sizes of pipe nipples, at the bottom of the base.

• ¾” x ¾” (Axxiom part #: 2130-005-12)
• 1″ x 1-¼” (Axxiom part #: 2130-006-12)
• 1-¼” x 1-¼” (Axxiom part #: 2130-007-12)
• 1-½” x 1-½” (Axxiom part #: 2130-008-12)
• NEW – 2″ x 2″ (Axxiom part #: 2130-009-12F), offers maximum flow for high volume applications, such as VertiDrive robot.
• Base of Hardened Steel for extended usability
• Genuine Schmidt® Product

• Essential Safety Item for Megablaster Pot closures
• Designed and installed on all Schmidt Bulk Pots since release in 2010
• Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
• Ensures that correct operating procedures are followed when opening the fill port.
• Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
• Genuine Parts – Manufactured by Schmidt – Axxiom Manufacturing

• Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
• 10″ Wheel & Tire
• Never Flat, rubber filled tires
• Makes for easy portability onsite
• Sold Individually
• Genuine Parts – Manufactured by Axxiom Manufacturing/Schmidt

BlastOne stocks the Axxiom replacement parts you need to keep your valves operating. These are the MicroValve 2 pipe nipples.

• 1-¼” MNPT x 1-½” MNPT, MPN 2127-007-10
• 1-½” MNPT x 1-½” MNPT, MPN 2127-008-10
• Hardened Steel for extended durability
• Genuine Schmidt / Axxiom Parts

• O-Ring Seal for 10” Schmidt blast pot closure 7mm section
• Used to create a complete seal on the top of the megablaster
• Recommend you replace seal at first sign of wear
• Sold Individually
• Genuine Parts – Manufactured by Schmidt / Axxiom Manufacturing

BlastOne has stocks the Axxiom replacement parts you need to keep your valves operating. These are the pipe nipples for the original Thompson I metering valve.

• 1-¼” MNPT x 1-¼” MNPT, MPN 2149-007-15 
• 1-½” MNPT x 1-½” MNPT, MPN 2149-008-15
• Hardened Steel for extended durability 
• Genuine Schmidt / Axxiom Parts

• Industrial-Grade Muffler for Manual Blow-Down (Pressure-hold) Blast Pots with Thompson valve or TeraValve
• Safer and much longer lasting than ‘throw-away’ mufflers
• Reduces blow-down noise to approximately 110 dB
• Intercepts abrasive that may otherwise escape when depressurizing
• Sold as a Field-Installable Retrofit Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Goes on blast pot leg)
  • Blowdown Hose Assembly
  • Ball Valve and required fittings
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt
• Also available for Pressure-Release pots here

• Replacement OEM Cleanout Port suit TeraValve™ XL™
• Blue Nylon Plug
• Schmidt® / Axxiom part # is 2130-000-13

• Suits Pneumatic Control Valve DM2229000
• Replacement Large O-Ring to ensure the piston seal is good
• Sold Individually
• Genuine Parts – Manufactured by Schmidt / Axxiom Manufacturing

• Installed in the riser tube below the pop up valve of the blast pot
• Used to stop backflow of air into the control lines and valves
• Typically used when blasting with fine or dusty abrasives
• Suits 1″ riser tubes
• User will need to reduce current riser tube height to make this fit.
• Allows maximum pressure fluctuation without back flow of dust and abrasive.
• Sold individually
• Genuine Parts – Manufactured by Axxiom Manufacturing/Schmidt

The Controlled Expansion Nozzle (CEN) Muffler Kit by Axxiom / Schmidt for Mega Pots significantly improves safety as well as reducing blowdown noise.  

• Using a CEN muffler removes the risk of freeze-up at the vent. Without this muffler, dangerous pressure can remain in the pot due to vent freeze-up.  Injury or death can result to an operator who removes the abrasive loading cover under pressure.  
• In addition, noise levels during blowdown without a CEN can exceed 140db.  With the CEN, the noise is reduced to 92db.
• The kit includes a 3″ NPT thread connection, and all parts needed to connect the muffler to the pot

• Suits Electric Blast Pot Control Valve DM2229100
• Service Kit is used to keep your blast pot operational
• Sold as a Kit containing;
  • Piston
  • Spring
  • Replacement O-rings
  • Face Seal
• Genuine Parts – Manufactured by Schmidt / Axxiom Manufacturing

Abrasive blasting hopper lid and mesh screen

• • Lid and Screen Set designed to suit blast pots
  • Hole size 1/8 (3 mm)
  • Screen sieves foreign matter out of the abrasive
  • Lid keeps moisture, rain, dew, etc out of the blast machine
  • Select the size to suit diameter of your blast pot 12″ 18″ 24″
  • Fit most portable blast machines, made by Schmidt abrasive blasting, Axxiom Manufacturing, Clemco

• OEM Complete Rebuild Kit for the Thompson® Valve I
• Replacement Seals, Tungsten Carbide Plunger & Sleeve
• Schmidt® / Axxiom part # 2149-000-99
• Includes: GV214900004, GV214900006, GV214900007, GV214900010, GV214900013, GV214900014, and GV214900018

• Replacement OEM Plunger for TeraValve™ XL
• Tungsten Carbide for long life
• Schmidt® / Axxiom part # 2130-000-06
• NOTE – this is included in the Extended Rebuild kit GV213000099

• Full repair kit for the 1-¼ (32mm) combo valve.
• Service Kit is used to repair the combo valve when something happens!
• Sold as a full Kit which includes;
  • Main Piston Seal
  • Plunger Seal
  • Complete set of O-Rings
• Genuine Parts – Manufactured by Schmidt / Axxiom Manufacturing

• Replacement OEM Diaphragm Plate for TeraValve™ XL
• Schmidt® / Axxiom part # 2130-000-05