Search: vertidrive

RENT or PURCHASE this surface preparation work-horse!

The next-generation V700 VertiDrive.  Boosting performance and profits on large blasting projects.

• Faster Production.  Now holds up to 3 nozzles and each nozzle is up to 30% faster than the best hand blasting.  Highest productivity of any robotic blasting system!
• Cleaner Surface.  Provides consistent blasting quality by adjustment of equipment speed to the specific surface needs.
• Safer.  Remote control operation removes the operator from harms way.
• Capable.  Boosted magnetic performance allows standard operation on carbon steel surfaces that are horizontal, vertical, and now even upside-down!
• Versatile.  The V700 can be configured in 3 ways:
  • Abrasive Blasting.  Can blast either wet or dry.
  • Ultra High Pressure (UHP) coating removal.
  • Power Wash surface cleaning.
• Reduced Cost-of-Ownership.  The VertiDrive V700 has the lowest maintenance cost of any blasting robot.
• Looking for more information? Click here to read more…

Note:  We recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) and can deliver cost savings on projects as small as 10,000 square feet.  Not all medias can be used with the VertiDrive.

Can be used with existing blast or UHP equipment, or BlastOne can provide.   Purchase pricing is typically between $165,000 and $204,000, depending on configuration.

BlastOne can provide on-site training and ongoing support to ensure maximum productivity from Day 1.  Schedule a call with our SMEs to calculate and expected ROI for your next project.

RENT or PURCHASE this surface preparation work-horse!

The next-generation V400 Ultra High Pressure VertiDrive. Bringing enhanced technology to closed-loop UHP projects.

• Faster.  V400 robotic technology is up to 5X faster than manual work.
• Cleaner.  The rust, coatings, and contaminants are removed and returned to the vacuum via the closed-circuit system.  
• Safer.  Remote control operation removes the operator from harms way.
• Capable.  Boosted magnetic performance allows standard operation on carbon steel surfaces that are horizontal, vertical, and even upside-down!
• Environmentally friendly.  Contaminants don’t just fall to the surface or blow away in the wind.  The V400 brings them back to the vacuum source for responsible disposal.
• Productive.  Has an extra-wide 15.5″ (400 mm) cleaning width

Note:  UHP does not create surface profile , but exposes the existing profile.

We recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) with at least 10,000 square feet to realize cost savings.  Can be used with existing UHP pumps or BlastOne can arrange.  Purchase pricing is typically between $165,000 and $204,000 depending on configuration.

BlastOne can provide on-site training and ongoing support to ensure maximum productivity from Day 1.  Schedule a call with our SMEs to calculate an expected ROI for your next project.

RENT or PURCHASE this surface preparation work-horse!

The original M7 VertiDrive.  Bringing improved production to large blasting projects.

• Faster Production.  Holds 2 nozzles simultaneously and each nozzle is up to 30% faster than the best hand blasting.
• Cleaner Surface.  Provides consistent blasting quality by adjusting equipment speed to the specific surface needs.
• Safer.  Remote control operation removes the operator from harms way.
• Capable.  Blast both horizontal and vertical surfaces with ease. 
• Versatile.  The M7 can be configured in 3 ways:
  • Abrasive Blasting.  Can blast either wet or dry.
  • Power Wash surface cleaning
  • Ultra High Pressure (UHP) coating removal.

Note:  we recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) with at least 10,000 square feet to recognize cost savings.  Not all medias can be used with the VertiDrive.

Can be used with existing blast equipment, or BlastOne can provide. Purchase pricing is typically between $125,000 and $204,000, depending on configuration.

BlastOne offers on-site training to help maximize your investment.  Contact us to discuss your specific project and estimate the ROI by using a VertiDrive.

BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:

• ESCON 70/10 Motor Controller CCB4.0
• V400 WCS with Connector
• Harting Han-Eco Locking Lever (2)
• Gearbox 050 with Flange
• V400 Motor Assembly
• Relay Module
• Carabine Hook (2)
• Lock Pin SS D10-L40 (2)
• Lock Pin SS D12-L70 (2)
• Wearplate (2)
• Spring (6)
• Spring Holder Nut (12)
• Vacuum Pan Skirt

BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Harting Han-Eco Locking Lever for the M7.