FREE SHIPPING ON ORDERS OVER $100! | SAVE BIG $$ WITH THE NEW BLASTER PPE BUNDLE! x

Search: workhead

Products

Various Workheads

Blast N’ Vac Workhead Complete Kits are great for flat surfaces, but custom units are available. Freatures include the following: 

  • Standard / BNV-2.5
  • Standard / BNV-3
  • Large with wheels / BNV-4
  • Standard / BNV-5
  • Super Five™
    • Largest workhead available
  • Standard / BNV-6
  • Right Angle
    • Designed to get into smaller areas 

 

The MiniBRS G2 Trigger Workheads are easier to handle than other versions for your vacuum blasting projects. Features include the following: 

  • Longer lasting brushes
  • More containment while blasting
  • Improved vacuum flow
  • Easier to slide head over surfaces while blasting 
  • Various Brush options available, including:
    • Flat Surface
    • Inside Corner
    • Outside Corner
  • Available in either Electric or Pneumatic 

 

MiniBRS Flat Brush for Workhead

  • Durable construction for long-lasting performance
  • Versatile brush suitable for various workhead applications
  • Enhances cleaning efficiency by removing debris and dirt effectively
  • Ergonomic design for a comfortable grip
  • Easy maintenance with simple rinsing
  • Compatible with multiple workhead models

Blast and Vacuum Recovery System

  • This Blast and Vacuum BRS system is built for high production vacuum blasting work.
  • The Vacuum system, blast machine and airdryer are all mounted to one skid.
  • The abrasive does not recycle which is ideal when you have very low dust requirements or when your specification calls for the use of virgin abrasive only.
  • This system is 100% pnuematic and does not require any electrical power.
  • Blast Pot capacity is 3.5 cuft.
  • Blast upto 60 sqft / 6 sqm per hour
  • Requires 750cfm of air

Pinovo PiCo Pipe Vacuum Blasting Workhead

  • Pinovo Pico is one of the most ingenious vacuum blasting discoveries in 10 years
  • Hand-held dustless external pipe blasting system.
  • Multiple different sized work-heads adapt to different sized pipe.
  • Works for 2″ – 8″ pipes
  • Genuine Parts – Manufactured by Pinovo in Norway
  • Minimal Availability in USA – Request a quote/express interest

Pinovo PiWalk Blast and Vacuum Workhead

  • Walk-behind vacuum blasting head
  • Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
  • Nozzle size: No.6 (⅜”)
  • Blasting rate: up to 64 ft²/6 m² per hour.
  • Compressed air requirement: 500 cfm.
  • Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
  • Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
  • Noise level: 89 dB at 1m distance.
  • Mounted with Wheels, making it easy to maneuver
  • Has replaceable rubber lining and brushes.
  • Genuine Parts – Manufactured by Pinovo in Norway

Limited availability in the USA – Request a quote/express interest.

View All

Trigger Workhead Outside Sleeve

BlastOne has the parts needed for your MiniBRS  Workheads. This is the Outside Sleeve for flat brushes (MPN 8033-000-84), for both the pneumatic and electric versions. 

Vacuum Workhead Trigger Guard

BlastOne has the parts needed to for your MiniBRS G2 Trigger Workheads. This is the Vacuum Workhead Trigger Guard (8033-000-91) for both pneumatic and electric versions. 

Trigger Workhead Rubber Gasket

BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Trigger Workhead Rubber Gasket (8033-000-83) for both the pneumatic and electric versions. 

G2 Trigger Workhead Cone Liner

BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Trigger Workhead Cone Liner (MPN 8033-000-82) for both the pneumatic and electric versions. 

Flat Heavy Duty Brush

  • Suit Blast and Vac Workhead VCBV100 Large Wheeled Unit
  • Replacement flat brush creates a seal with the surface to capture dust and abrasive
  • VCBV100 Workhead uses a single large flat brush seal
  • Sold Individually

Pinovo PiPoint Mini Blast and Vacuum Workhead

  • The PiPoint is the smallest hand-held vacuum blasting tool.
  • Has 8 interchangeable heads providing flexibility for different job requirements.
  • Allows you to blast inside a small box web beam, etc.
  • Nozzle size: No.6 (⅜”)
  • Blasting rate: up to 6 ft²/0.6 m² per hour.
  • Compressed air requirement: 250 cfm.
  • Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
  • Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
  • Noise level: 89 dB at 1m distance.
  • Genuine Parts – Manufactured by Pinovo in Norway

Limited availability in the USA – Request a quote/express interest.

Schmidt® MiniBRS Blast and Vacuum Recovery System

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

  • Blasting rate up to 20 ft2 per hour.  Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
  • Utilizes the TeraValve XL abrasive metering valve
  • Compressed Air Requirement is only 185 cfm
  • Has wheels and fork pockets for easy portability by hand, or by forklift.
  • 100% compressed air powered – no electricity required
  • Various workheads are available for flat surfaces, inside corners, outside corners, etc. – enquire for details.
  • Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

Schmidt® 3.5 cuft Blast and Vacuum Recovery System

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

  • Abrasive holding capacity of 3.5 cu ft
  • Blasting rate up to 40 ft2 per hour
  • Compressed Air Requirement 750 cfm
  • Includes fork pockets
  • Can be wheel mounted for increased jobsite maneuverability
  • Recirculating full size blast & recovery unit
  • 100% compressed air driven – no electricity required

Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

For rental or purchase

Pinovo PiConnect Blast and Vacuum Workhead

  • A lightweight closed-circuit vacuum blaster with interchangeable heads.
  • Edge blasting tools.
  • Nozzle size: No.6 (⅜”)
  • Blasting rate: up to 27 ft²/2.5 m² per hour.
  • Compressed air requirement: 320 cfm.
  • Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
  • Genuine Parts – Manufactured by Pinovo in Norway.
  • Limited availability in the USA – Request a quote/express interest.

Brushes for MiniBRS G2 Trigger Vacuum Workheads

The G2 Trigger Vacuum Workhead uses various brush types to enable it to work on inside and outside corners, as well as on flat surfaces.  This group includes the following brush options:

  • Replacement Flat Brush (Brush Only)
  • Inside Corner Brush Assembly (Includes Adapter, Brush, and Sleeve)

    • Replacement Inside Corner Brush
  • Outside Corner Brush Assembly (Includes Adapter, Brush, and Sleeve)

    • Replacement Outside Corner Brush

Note:  Brushes are effective on surfaces up to 150°F.

Fine Thread Nozzle Holder for VCBV200

  • Suit Blast and Vac Workhead VCBV200
  • Fine Thread Nozzle Holder
  • Connects Blast hose to the nozzle and the workhead.
  • You can not use the Workhead without this
  • Sold Individually

Blast and Vacuum Central Wear Liner

  • Suits VCBV200 Blast and Vac Workhead
  • Blast and Vacuum Central Wear Liner
  • Used to prevent premature wear to the workhead
  • Sold Individually

Wear Liner Lower Main Body for VCBV-200

  • Suits Standard Blast and Vac Workhead VCBV-200
  • Wear Liner for the Lower Main Body
  • Stops the main body wearing out from the blast media stream
  • Sold Individually

Flat Inner Brush for VCBV200

  • Suit Blast and Vac Workhead VCBV200
  • Replacement inner brushes create a seal with the surface to capture dust and abrasive
  • Internal flat brush, used in combination with Outer brush
  • Sold Individually
  • Bristle Length: 1 ½ (38mm)
  • Compatible: BNV6
  • Inner Brush and Outer Brush required to achieve effective sealing on several types of work heads
  • Use in conjunction with work head to vacuum blast flat surfaces or slightly rounded surfaces

Replacement Handle for VCBV200

  • Suit Blast and Vacuum Workhead VCBV200
  • Replacement handle makes it easy for the operator to maneuver
  • If using on a vertical surface you will still require 2 operators
  • Has convenient rubber grip
  • Sold Individually

Flat Outer Brush for VCBV200

  • Suit Blast and Vac Workhead VCBV200
  • Replacement outer brushes create a seal with the surface to capture dust and abrasive
  • Secondary flat outer brush, use with inner brush as well
  • Sold Individually

Informational Content

Add to quote:

Registration is required to create a Quote.

Click Here to Login or Register.

Add to existing quote:

Add to Quote

Add to a new quote:

Send the request

BlastOne says
Thank you for submitting your quote. A sales representative will follow up with you asap.
Share Quote via Email

Share