My Account
GVS
Showing all 5 results
-
From the makers of the Nova Respirators!
- GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 10 per case, with case discount
- Multiple filter versions available as follows:
- Standard P100. These filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns.
- Standard P100 Starter Kit. Same as above along with a hard carry case and extra set of filters included.
- Enhanced P100 w/activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- Standard P100 Source Control. Designed for healthcare market and reduces cost and waste as compared to N95 disposable masks. Side exhaust valves removed.
- Reuse your respirator over and over again with the low-profile line of GVS replacement filters.
- NIOSH Approved TC-84A-8062.
NOTE - This is the low-profile series. Standard-profile Elipse Masks (which offers Acid Gas & Multi-Gas filter options) are also available.
As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.
-
From the makers of the Nova Respirators!
- GVS Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 5 per case, with case discount.
- Multiple filter versions available as follows:
- Standard P100
- Enhanced P100 w/Nuisance Odor control
- OV / P100 - P100 Organic Vapor protection. Painters favorite!
- Reuse your respirator by using the low-profile line of GVS replacement filters, which include a pre-filter option which extends the life of the OV / P100 filter.
- NIOSH Approved goggles provide ANSI Z87+ eye protection.
- Goggles are scratch and fog resistant. Tear-off lenses available separately to keep them clean while spraying
NOTE - This is the low-profile series with enhanced field of vision. Standard-profile Integra Masks (which offer Acid Gas & Multi-Gas filter options) are also available.
Your regular eyeglasses will not fit under these goggles. However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.
As with all close-fitting respirators, these are designed to be used where fit testing is conducted. The GVS Portacount Adaptor is available to facilitate this testing.
-
Replacement filter cartridges to suit GVS Elipse and Integra Standard-Profile half-masks.
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- OV / P100. Protects against organic gases and particulates.
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases.
- Multi-Gas P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
NOTE - This is the standard-profile series. The low-profile series is available here.
Genuine GVS product.
-
Replacement filter cartridges to suit GVS Elipse and Integra Low-Profile half masks.
- Standard P100. These filters will remove up to 99.97% of particles and contaminants down to 0.3 microns.
- Enhanced P100 w/ activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Protects against organic vapors and particulates.
- Prefilters. Optional filters designed to extend the life of the OV filter. Requires filter holder kit as shown.
NOTE - This is the low-profile series. The standard-profile series is available here.
Genuine GVS product.
-
BlastOne carries all the parts and accessories for the GVS / RPB respirators. This group includes all breathing tubes (aka breathing hoses) as well as the covers for both the supplied air and the PAPR versions, as follows:
- Nova 2000 SAR Breathing Air tube, legacy version with adapter, MPN: NV2021A
- Nova 3 & updated Nova 2000 SAR Breathing Tube, MPN: NV32021B (does not include adapter)
- T-Link, T200, Z4, & Z-Link SAR Breathing Air Hose, MPN: 04-833A (includes adapter for Z-Link & T-Link)
In addition to the above Supplied Air Respirator tubes, we have PAPR breathing tubes for all RPB products as well as breathing air tube covers.
