My Account
All Products
Showing 1–15 of 1328 results
-
HLBB4612BlastOne supports Bullard industrial respirators with the consumables and parts required to keep them serviceable. This replacement belt includes the buckle, and is designed for Bullard respirators with cooling tubes.HLBB4612BlastOne supports Bullard industrial respirators with the consumables and parts required to keep them serviceable. This replacement belt includes the buckle, and is designed for Bullard respirators with cooling tubes. -
Thickness standards are used to verify the accuracy and operation of coating thickness gauges. As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.
DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified Coated Metal Plates (one being a zero plate).
Select the Standard set that most closely matches the measuring range of your probe. See selection chart under the Description tab.
-
Thickness standards are used to verify the accuracy and operation of coating thickness gauges. As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.
DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified polystyrene blocks, intended for probes that measure thick coatings (60 mils / 1500 microns and up)
Select the Standard set that most closely matches the measuring range of your probe. See selection chart under the Description tab.
-
BATL128The Air Tool Lubrication Oil is made to optimize performance, while prolonging the life of air tools, cylinders, and accessories.- Use with in-line lubricators or pour directly into tool reservoir
- Prohibits rust and removes moisture
- Non corrosive, non-reactive, and does not decompose
- #10 weight lubricant
BATL128The Air Tool Lubrication Oil is made to optimize performance, while prolonging the life of air tools, cylinders, and accessories.- Use with in-line lubricators or pour directly into tool reservoir
- Prohibits rust and removes moisture
- Non corrosive, non-reactive, and does not decompose
- #10 weight lubricant
-
Blast hoses must be cut square before attaching a fitting to them. The use of hose cutters like these are recommended as using a saw or other process will not allow the fitting to seat properly, causing premature wear. Replacement blades available. Two sizes available: HFKCT100 for hoses up to 2 3/8" (60mm) OD. HFKCT150 for hoses up to 3" (75mm) OD. -
The Blast Ninja nozzle is an option for reducing the noise of blasting in certain applications. It offers price-leading economy for applications where production speeds are not critical. Product details are as follows:- Sizes. Comes in #4, #5, and #6 orifices.
- Threads. Offered in fine or contractor thread in poly, brass, or aluminum threads.
- Liner options. Available in tungsten carbide or extended-life silicon nitride.
-
HFKCT151Refresh your 3" / 75mm hose / plastic pipe cutter with a new blade, available here from Blastone.HFKCT151Refresh your 3" / 75mm hose / plastic pipe cutter with a new blade, available here from Blastone. -
The Axxiom ShortStop prevents accidental activation of electric deadman systems caused by short-circuits in the control cable. This safety-enhancing option is especially beneficial when blasting at heights, or in applications where the control cable is susceptible to high wear. The ShortStop PnP (Plug-n-play) is simple to install and includes the control module and junction box needed to convert existing electric control systems*. Both single-outlet and 4-outlet bulk pot conversions are available. *Note: Deadman handles are unique to the ShortStop PnP. Conversion kits do not include handles, which are available separately on this page. -
INDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIPINDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIPPart Number Purchase Price INDBELTCLIP $15.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$15.00
-
-
Each DeFelsko instrument family is factory calibrated and is designed to be ready-to-use upon arrival. Best practice and specifications determine when instruments should have their calibrations rechecked. For the PosiTector UTG probes, DeFelsko offers five different variations of stainless steel Step Blocks that are factory certified for checking their calibration, as follows:- B1. Standard range Imperial. Five steps (100, 200, 300, 400, and 500 mils).
- B1M. Standard range Metric. Five Steps (2.5, 5, 7.5, 10, and 12.5 mm).
- B2. High range Imperial. Eight steps (1", 1.5", 2", 2.5", 3", 3.5", 4", and 4.5").
- B2M. High range Metric. Eight steps (25, 37.5, 50, 62.5, 75, 87.5, 100, and 112.5 mm).
- P. (Use with PosiTector UTG P probe.) Imperial labeled at 40, 60, 80, and 100 mils. (Metric equivalent 1, 1.5, 2, and 2.5 mm)
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector CMM IS concrete moisture meter platform is expandable, and larger concrete areas can be tested simultaneously in accord with ASTM F2170 standards by increasing the number of in-situ probes. CMM IS Expansion Packs (additional probes) are available singly or in packs of 4 or 16 and each probe includes the following accessories:- Calibration Check chamber
- Saturated salt solution
- Cap / cover
- 2 stackable probe extensions
- Battery
-
The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards. The DeFelsko SST test probe is an easy and accurate way to conduct these tests. Test patches are required to perform them and DeFelsko has multiple options, as follows:- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
- Rigid ring. Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
- Flexible ring. Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
- Saves time and money vs. disposable patches.
- Utilizes a plastic needle - no sharp hypodermic needles required!
- Latex Disposable. The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
- Latex-Free Disposable. Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
-
INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.Part Number Purchase Price INDRTRTAPEHLDER $10.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$10.00
-
-
The PosiTector® 6000 probe family - DeFelsko's solution for non-destructive coating thickness measurement on metallic* substrates. This is the most extensive range of instrument probes that DeFelsko offers - many versions available for many different applications. Further details as follows:
- Familiar. These interchangeable probes are compatible with the tried-and true DeFelsko Standard and Advanced Gauge Bodies. In addition, all current versions can also be paired with the PosiTector SmartLink / mobile app platform. (Compatibility chart available under the document tab to confirm compatibility on older gages.)
- Versatile. Checks coating thickness in many applications, including:
- Single-handed use (integral probes)
- Cabled probes in various lengths
- Hot / Rugged applications
- Very thin to very thick coatings
- and more!
This page shows probes only. Package options including DeFelsko 6000 Standard Gages and DeFelsko 6000 Advanced Bodies are shown on their separate pages. Probes - not the Gage / Bodies - are factory calibrated and each new probe comes with a Certificate of Calibration. For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.) Contact us for information on probe repairs or probe re-certifications. *The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.
-
The PosiTector® interchangeable probe inspection system is the backbone of the DeFelsko instrument collection. Save time and cost by choosing a pre-configured multi-probe inspection kit. Details on the most popular inspection kit configurations are as follows:- Standard Inspection Kits include:
- Choice of either Standard or Advanced Body. (Compare features on the PosiTector Standard and Advanced Bodies on their separate page.)
- PosiTector SPG, Surface Profile Gauge
- PosiTector DPM, Environmental Probe
- Choice of Coating Thickness Probe:
- Ferrous or Combination Ferrous / Non-Ferrous
- Cabled or Integral
- Standard range (0-60 mils / 0-1500 microns) or Extended range (0-250 mils / 0-6mm). More details about the PosiTector 6000 coating thickness probes is on their separate page.
- Extreme Inspection Kit includes:
- Advanced Body
- PosiTector RTR-H, Testex Replica Tape Reader Probe for Surface Profile
- Testex X-tra Coarse tape roll
- PosiTector DPM, Environmental Probe
- PosiTector DPM-L, Remote Environmental Logger
- PosiTector FS, Cabled, Ferrous, Standard Range probe
- Also Includes: In addition to the selected gauge and probes, each kit also includes a carry case, calibration certificate, plastic shims, and more!
- Standard Inspection Kits include:
