All Products
Showing 1–15 of 1320 results
-
Thickness standards are used to verify the accuracy and operation of coating thickness gauges. As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.
DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified polystyrene blocks, intended for probes that measure thick coatings (60 mils / 1500 microns and up)
Select the Standard set that most closely matches the measuring range of your probe. See selection chart under the Description tab.
-
Blast hoses must be cut square before attaching a fitting to them. The use of hose cutters like these are recommended as using a saw or other process will not allow the fitting to seat properly, causing premature wear. Replacement blades available. Two sizes available: HFKCT100 for hoses up to 2 3/8" (60mm) OD. HFKCT150 for hoses up to 3" (75mm) OD.
-
The Blast Ninja nozzle is an option for reducing the noise of blasting in certain applications. It offers price-leading economy for applications where production speeds are not critical. Product details are as follows:
- Sizes. Comes in #4, #5, and #6 orifices.
- Threads. Offered in fine or contractor thread in poly, brass, or aluminum threads.
- Liner options. Available in tungsten carbide or extended-life silicon nitride.
-
INDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIPINDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIP
-
Each DeFelsko instrument family is factory calibrated and is designed to be ready-to-use upon arrival. Best practice and specifications determine when instruments should have their calibrations rechecked. For the PosiTector UTG probes, DeFelsko offers five different variations of stainless steel Step Blocks that are factory certified for checking their calibration, as follows:
- B1. Standard range Imperial. Five steps (100, 200, 300, 400, and 500 mils).
- B1M. Standard range Metric. Five Steps (2.5, 5, 7.5, 10, and 12.5 mm).
- B2. High range Imperial. Eight steps (1", 1.5", 2", 2.5", 3", 3.5", 4", and 4.5").
- B2M. High range Metric. Eight steps (25, 37.5, 50, 62.5, 75, 87.5, 100, and 112.5 mm).
- P. (Use with PosiTector UTG P probe.) Imperial labeled at 40, 60, 80, and 100 mils. (Metric equivalent 1, 1.5, 2, and 2.5 mm)
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector CMM IS concrete moisture meter platform is expandable, and larger concrete areas can be tested simultaneously in accord with ASTM F2170 standards by increasing the number of in-situ probes. CMM IS Expansion Packs (additional probes) are available singly or in packs of 4 or 16 and each probe includes the following accessories:
- Calibration Check chamber
- Saturated salt solution
- Cap / cover
- 2 stackable probe extensions
- Battery
-
The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards. The DeFelsko SST test probe is an easy and accurate way to conduct these tests. Test patches are required to perform them and DeFelsko has multiple options, as follows:
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
- Rigid ring. Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
- Flexible ring. Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
- Saves time and money vs. disposable patches.
- Utilizes a plastic needle - no sharp hypodermic needles required!
- Latex Disposable. The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
- Latex-Free Disposable. Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
-
The PosiTector® 6000 probe family - DeFelsko's solution for non-destructive coating thickness measurement on metallic* substrates. This is the most extensive range of instrument probes that DeFelsko offers - many versions available for many different applications. Further details as follows:
- Familiar. These interchangeable probes are compatible with the tried-and true DeFelsko Standard and Advanced Gauge Bodies. In addition, all current versions can also be paired with the PosiTector SmartLink / mobile app platform. (Compatibility chart available under the document tab to confirm compatibility on older gages.)
- Versatile. Checks coating thickness in many applications, including:
- Single-handed use (integral probes)
- Cabled probes in various lengths
- Hot / Rugged applications
- Very thin to very thick coatings
- and more!
This page shows probes only. Package options including DeFelsko 6000 Standard Gages and DeFelsko 6000 Advanced Bodies are shown on their separate pages. Probes - not the Gage / Bodies - are factory calibrated and each new probe comes with a Certificate of Calibration. For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.) Contact us for information on probe repairs or probe re-certifications. *The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.
-
The PosiTector® interchangeable probe inspection system is the backbone of the DeFelsko instrument collection. Save time and cost by choosing a pre-configured multi-probe inspection kit. Details on the most popular inspection kit configurations are as follows:
- Standard Inspection Kits include:
- Choice of either Standard or Advanced Body. (Compare features on the PosiTector Standard and Advanced Bodies on their separate page.)
- PosiTector SPG, Surface Profile Gauge
- PosiTector DPM, Environmental Probe
- Choice of Coating Thickness Probe:
- Ferrous or Combination Ferrous / Non-Ferrous
- Cabled or Integral
- Standard range (0-60 mils / 0-1500 microns) or Extended range (0-250 mils / 0-6mm). More details about the PosiTector 6000 coating thickness probes is on their separate page.
- Extreme Inspection Kit includes:
- Advanced Body
- PosiTector RTR-H, Testex Replica Tape Reader Probe for Surface Profile
- Testex X-tra Coarse tape roll
- PosiTector DPM, Environmental Probe
- PosiTector DPM-L, Remote Environmental Logger
- PosiTector FS, Cabled, Ferrous, Standard Range probe
- Also Includes: In addition to the selected gauge and probes, each kit also includes a carry case, calibration certificate, plastic shims, and more!
- Standard Inspection Kits include:
-
The PosiTector RTR family of instruments is DeFelsko's state-of-the-art solution for surface profile measurement and more. Two different probe models are available and selected features are listed below:
- Familiar. Based on the award-winning PosiTector instrument body platform, the RTR probes are easy to master and use.
- Capable. State-of-the-art technology with 2 models as follows:
- PosiTector RTR H. This 2D version measures surface profile using Testex tape just like a spring micrometer, but with the following enhancements:
- Automatically compensates for the thickness of the Testex film backing.
- Using conventional Testex Coarse or X-Coarse tape, the RTR H calculates linearized measurements automatically, without the complicated averaging process required by analog spring micrometers.
- Stores readings which can be uploaded to PosiSoft, Mac, and smartphone software for professional reporting. Of course, you can keep the physical replica tape as well.
- Ready-to-measure. No calibration adjustment required for most applications.
- PosiTector RTR 3D. This 2D / 3D version offers the same features as the RTR H above, but with these extra features:
- Creates a 3D image of the profile and calculates Peak Density, Peak Count and more - a total of 14 common 2D and 3D surface parameters.
- When paired with the Advanced body, the RTR 3D can download high-res .SDF files for further analysis.
- These 3D surface parameters are proving to be as important (if not more so) than traditional surface profile measurements for predicting coating life. Future proof your instrument purchase against changing specifications by investing in the highly capable PosiTector RTR 3D!
- Note: The PosiTector RTR 3D requires Optical grade Testex tape.
- PosiTector RTR H. This 2D version measures surface profile using Testex tape just like a spring micrometer, but with the following enhancements:
- Configurable. Your choice of RTR probe is available separately (for use with existing PosiTector gage / body), or can be purchased as a kit with your choice of Standard or Advanced body.
-
INDAIRQuickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems. Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems. DeFelsko MPN: AIRINDAIRQuickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems. Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems. DeFelsko MPN: AIR
-
INDCMMThe PosiTest CMM - DeFelsko's solution for accurate comparative concrete moisture measurements. Simple and powerful, it offers a convenient way to conform to ASTM F2659. Selected features as follows:
- Simple Design. Simply placing the DeFelsko CMM directly on a clean, concrete floor gives a quick moisture measurement. It is a non-destructive test and doesn't require holes to be drilled in the concrete slab or screed.
- Fast. The CMM gives instant readings.
- Robust. Sturdy IP65 construction offers weatherproof, dust proof, and water resistance. Shock resistant too!
- Easy to use. For large areas, the optional DeFelsko Telescopic Extender eliminates the need for kneeling to perform the tests.
- Capable. Tests concrete moisture to depths of ¾ or 1 inch. Integrates with PosiSoft software via USB cable for reporting.
INDCMMThe PosiTest CMM - DeFelsko's solution for accurate comparative concrete moisture measurements. Simple and powerful, it offers a convenient way to conform to ASTM F2659. Selected features as follows:- Simple Design. Simply placing the DeFelsko CMM directly on a clean, concrete floor gives a quick moisture measurement. It is a non-destructive test and doesn't require holes to be drilled in the concrete slab or screed.
- Fast. The CMM gives instant readings.
- Robust. Sturdy IP65 construction offers weatherproof, dust proof, and water resistance. Shock resistant too!
- Easy to use. For large areas, the optional DeFelsko Telescopic Extender eliminates the need for kneeling to perform the tests.
- Capable. Tests concrete moisture to depths of ¾ or 1 inch. Integrates with PosiSoft software via USB cable for reporting.
-
INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5
-
The PosiTest® PC - DeFelsko's solution for non-destructive prediction of final thickness on powder coated finishes. This latest model offers both an improved design and lower pricing than before. Features include:
- Simple Design. Dedicated stand-alone unit is very easy to learn and use.
- Durable. Solvent, acid, oil, water, and dust resistant - a great combination when used in harsh powder environments.
- Powerful. Stores up to 999 readings with on-screen averaging. Readings can be downloaded to PosiSoft desktop software using the included USB cable.
- Accurate. New sensor design improves measurement on odd geometries, moving parts, and small tubes. Complies with ASTM D7378.
- Flexible. Available in the following configurations:
- PosiTest PC dedicated kit. Includes PC device, zero probe fixture, protective lens, carry case, and more.
- Powder Inspection Kit with PosiTector 6000. Includes PC dedicated kit, powder combs, choice of Standard or Advanced PosiTector 6000 body, and choice of FS Ferrous or FNS Combination Ferrous / Non-Ferrous cabled coating thickness probe.
- Powder Inspection Kit with PosiTest DFT. Includes PC dedicated kit, powder combs, and choice of Ferrous or Combination Ferrous / Non-Ferrous dedicated DFT gage.