Blasting Parts & Consumables
Showing 226–240 of 526 results
-
- 2-claw Blast Hose QC Quick couplings
- Available in Brass, Aluminum, Steel and Nylon
- 2 types available - Standard and MegaMax.
- NOTE: MegaMax and Standard couplings require an adapter to fit together
- MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings and increases the PSI available to the nozzle. The increased PSI is mostly beneficial when doing high-production blasting using 1.5" or 2" ID Blast Hoses.
- These are unthreaded couplings designed for blast hoses only. Threaded QC fittings are used on the metering valve outlet, and can be found HERE.
- Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6
-
Nozzle holder for blast hose
- Couples the blast nozzle to the blast hose
- Choose your blast nozzle thread type;
- 3/4" Medium (aka Mitey-Mite) Thread
- 1-1/4" Industrial Fine Thread
- 2" Coarse/Contractor Thread *Contractor Favorite*
- Available in Nylon, Brass or Aluminum
- Click the Documents tab below to view full selection
- Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3
-
- 2-claw threaded coupling for metering valve outlet, to enable connection of blast hose
- Supplied with HFGMRLP coupling gasket fitted
- For Aluminum, Brass, and Steel, use HFCLP1 thin safety lock pins - purchase separately
- Nylon is supplied with HFGPCG gasket fitted and contains an integral springlock pin
- 2 types available - Standard and MegaMax.
- Note: MegaMax and Standard couplings require an adapter to fit together.
- MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings, and increases the PSI available to the nozzle. The increased PSI is mostly beneficial when doing high-production blasting using 1.5" or 2" ID Blast Hoses.
- These are threaded couplings designed for metering valve outlets only. Unthreaded QC couplings are used on blast hoses, and can be found HERE.
- Note: 1 1/4" threaded couplings can also be used as Quick-couple type nozzle holders for fine thread nozzles.
- Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2
-
- Suits MegaFlow Bull Air Hose 1-1/2" and 2" (BHBULL38/50)
- 4-Claw Crowsfoot Bull Hose Coupling
- Supplied with FMCFG gasket fitted
- Always use HFCLP2 lock pins - order separately
- Rated for 150 psi
- Sold Individually
-
- Suits MegaFlow Bull Air Hose (BHBULL50/75)
- Ground Joint Spud Bull Hose Coupling
- Rugged plated steel construction
- Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
- Gasket-less, low maintenance design
- Sold Individually
- Genuine Parts – manufactured by Dixon
-
- Suits MegaFlow Bull Air Hose (BHBULL50/75)
- Ground Joint Spud Hose Fittings made of Plated Iron - Connects Air hose to Equipment
- Recommended by BlastOne as the preferred Bull hose fitting - safer than 4-claw
- Sold Individually
- Genuine Parts - Manufactured by Dixon
-
- 30 Day Money Back Guarantee | Free Returns
- Industry standard coupling for use with air supply hose
- Rugged steel construction
- Quarter-turn quick action connector
- Supplied with 3/4" I.D. bore gaskets fitted
- Use HF CLP-1 or HF CLP-2 Lock Pin - (not included)
- Available with hose tail, male threads, or female threads
- Sold individually
-
VCBV066
- Suits Blast and Vac Workhead VCBV100 (Wheeled Unit)
- Nozzle Internal Venturi 3/8" #6 Long Venturi
- Long Lasting
- Sold Individually
VCBV066- Suits Blast and Vac Workhead VCBV100 (Wheeled Unit)
- Nozzle Internal Venturi 3/8" #6 Long Venturi
- Long Lasting
- Sold Individually
-
VCBV006
- Suits VCBV100 and BNV-4/6
- Centre Tube Wear Liner
- Wears out instead of the body
- Sold Individually
VCBV006- Suits VCBV100 and BNV-4/6
- Centre Tube Wear Liner
- Wears out instead of the body
- Sold Individually
-
- Must be installed in all blast hose couplings for safety
- Stops the blast hose coupling rotating and disconnecting
- HF-CLP1 is the thin type lock pin (Pack of 25)
- HF-CLP2 is the thick type lock pin (Pack of 25)
- HF-CLP3 is the nylon coupling spring type lock pin (Pack of 10)
- HF-CLP4 is the multi-fit spring type lock pin (Pack of 25)
-
HT1595910
- Pneumatically operated scaling hammer with 11 working pistons
- Ideal for removing tough materials on ship decks before abrasive blasting
- Floating head design to glide across uneven surfaces
- Equipped with 11 Carbide-tipped heads
- Sold as a complete kit, ready to work
- Genuine Products - Manufactured by Trelawny
HT1595910- Pneumatically operated scaling hammer with 11 working pistons
- Ideal for removing tough materials on ship decks before abrasive blasting
- Floating head design to glide across uneven surfaces
- Equipped with 11 Carbide-tipped heads
- Sold as a complete kit, ready to work
- Genuine Products - Manufactured by Trelawny
-
HT159593
- ATEX Certified - for use in potentially explosive or hazardous environments
- Sold individually
- Intrinsically safe variant of SF11 Deck Hammer (HT1595910)
- ATEX Gas Zone 1
- ATEX Dust Zone 21
HT159593- ATEX Certified - for use in potentially explosive or hazardous environments
- Sold individually
- Intrinsically safe variant of SF11 Deck Hammer (HT1595910)
- ATEX Gas Zone 1
- ATEX Dust Zone 21
-
These medium thread nozzles have a longer venturi than the BNAT nozzle series, making them ideal for use in our RotorBlast internal pipe blaster (when blasting pipe 12" in diamater or greater). Available in multiple orifice sizes. When using them in pairs (like when using in the RotorBlast), be sure to calculate your compressor CFM size requirement accordingly.
-
HTX01018
- The preferred choice for ferrous applications
- Flutes are ground in both directions - right and left hand - increasing operator control and efficient stock removal in harder materials
- Can be used for milling, acute angle milling and narrow contouring in brass, bronze, copper, cast iron, 45-60 Rc steels, carbon steel, nickel chrome steel, stainless steel, steel weldments and titanium
HTX01018- The preferred choice for ferrous applications
- Flutes are ground in both directions - right and left hand - increasing operator control and efficient stock removal in harder materials
- Can be used for milling, acute angle milling and narrow contouring in brass, bronze, copper, cast iron, 45-60 Rc steels, carbon steel, nickel chrome steel, stainless steel, steel weldments and titanium
>>> Click to SEARCH <<<
If your unable to locate what you need, Contact Us today!
Navigating our extensive inventory is a breeze, thanks to our user-friendly online shop. With an easy-to-search platform, you can quickly find the exact part you’re looking for, be it for a specific valve, machine, or any other component. And if ever you’re unsure about the right part for your equipment, our exceptional customer service team is always on hand to guide you. With a deep understanding of sandblasting equipment, they will help you pinpoint the exact replacement part you need, ensuring minimal downtime and optimized performance.
In short, for all your sandblasting equipment repair part needs, look no further. From a vast selection of OEM parts, easy online shopping, to unmatched customer service support, we’ve got you covered. Ensure the longevity and efficiency of your equipment by choosing the best in the business.