My Account
Coating Film Thickness Measuring Gauges, Probes, & Instruments
Showing 16–30 of 38 results
-
The PosiTector UTG - DeFelsko's solution for measurement of wall thicknesses of pipes, tanks, and more where access is limited to one side. Here are some highlights of the highly capable DeFelsko ultrasonic thickness gage probe family:- Familiar. The UTG family of probes are interchangeable with the tried-and-true DeFelsko gage body platform.
- Capable. Six different probe versions are available, depending on the requirements of the application. The first four are standard corrosion single-echo probes designed for applications where the surface is unpainted (or has the paint removed.)
- PRBUTGC: Standard frequency 5mz transducer. Cabled.
- PRBUTGCX: Xtreme version of above with a braided stainless cable with strain relief for demanding use.
- PRBUTGCA: Same as above, except integral non-cabled design. This version is ideal for one-handed use.
- PRBUTGCLF. Low-frequency 2.25mz transducer for attenuative materials like cast iron. Standard cable.
- The following two models are both cabled, and can be used on either painted or non-painted substrates.
- PRBUTGM: 5mz transducer with highly versatile single and multi-echo modes. Single mode offers greater (up to 5 inches thick) measurement range, but should be used where paint has been removed. Multi-echo mode does not require the paint to be removed and can measure walls up to 2.5 inches thick. This version has a durable alumina wear face and is ideal for use on rough or blasted surfaces.
- PRBUTGP: 15mz transducer offers high precision when measuring thin materials (up to .475 inch thick steel or up to .175 inch thick plastic). It has automatic single / multi echo mode switching for use on painted or unpainted surfaces. This probe can be used to measure thicknesses of plastic bottles, aircraft windows, thin-wall pipe, and much more.
- Configurable. Any of the six probes can be configured in the following packages:
- Probe only. Use with your existing PosiTector gauge.
- Standard PosiTector package with choice of probe.
- Advanced PosiTector package with choice of probe.
- Note: All PosiTector UTG packages come with case, ultrasonic gel, calibration certificate, and more.
-
BlastOne offers all DeFelsko instruments, accessories, and consumables with easy, on-line ordering capability. This PosiTest® DFT series is a lower-cost design, which provides basic coating thickness measurements for most coatings, but without the memory, connectivity, and other features of the premium PosiTector 6000 series. Information specific to these PosiTest® Dry Film Thickness gauges is as follows:
- Design:
- Dedicated and simple, this unit only measures DFT for non-magnetic coatings, without frills and economically.
- Simple on-board icon-based menu.
- Configurations:
- Ferrous substrates (only) model (MPN: DFTF)
- Ferrous / non-ferrous substrates model (MPN: DFTC)
- Both gages come as a kit with a case, precision plastic shims, Calibration Certificate, and more.
- Design:
-
BlastOne offers all DeFelsko products, including testing instruments, their accessories, and related supplies. This group of mechanical gauges use rare-earth cobalt magnets to manually measure coating thickness on ferrous substrates. Additional information:
- Simple. Straightforward and able to be used in any orientation.
- Capable. Scales available in both mils and microns, and in 2 thickness ranges. Can measure coatings on cylindrical surfaces too. Go / No-Go button can be set for rapid measurement.
- Sturdy. Wear-resistant carbide probe and rugged housing for years of service.
-
The PosiTest OTL - DeFelsko's solution to monitor and record temperature profiles in Powder Coating and other industrial ovens. Configurable in various ways, some of it's features include:
- Simple Design. With an easy-to-use interface and bright LED's to indicate logger status, operating the Oven Temperature Logger is simple and intuitive.
- Capable. The DeFelsko OTL can:
- Measure & record up to 40,000 datasets in up to 6 batches. Records temperatures every 2 seconds for up to 22 hours.
- 6 ‘Channels’ (K-type thermocouple ports) for adding temperature probes.
- Configurable. Depending on the specific application, the OTL offers various configurations, such as:
- PosiTest OTLKIT, including logger with barrier box and standard Holder (65 minute endurance at 200° C)
- PosiTest OTLKITXT, same as above, except with heat-sink Holder (200 minute endurance at 200° C)
- (See sliding scale endurance chart on the brochure under the Documents tab)
- OTL logger only without barrier box, for use with temperature probes and when the logger does not need to be in the oven.
-
INDUTGPTRNSDCRRepair - don't replace - your DeFelsko® PRBUTG P (Ultrasonic Thickness Gauge Precision probe) when the transducer fails. Save hundreds! BlastOne carries replacement parts for all DeFelsko products including this replacement transducer.INDUTGPTRNSDCRRepair - don't replace - your DeFelsko® PRBUTG P (Ultrasonic Thickness Gauge Precision probe) when the transducer fails. Save hundreds! BlastOne carries replacement parts for all DeFelsko products including this replacement transducer.
Part Number Purchase Price INDUTGPTRNSDCR $435.00 DeFelsko® Replacement Transducer for PRBUTG P – Precision model probe
Part #INDUTGPTRNSDCR
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$435.00
-
-
INDGLSCLEANKITThe DeFelsko GLS Gloss Meter has an on-board calibration standard. Periodically, or when dust / dirt are visible, the gloss standard should be cleaned to ensure measurement accuracy. 10 packs of cleaning wipes are included with each new DeFelsko GLS kit. This item is also a set of 10 wipes, and is available separately as a replacement order item. MPN: GLSCLEANKITINDGLSCLEANKITThe DeFelsko GLS Gloss Meter has an on-board calibration standard. Periodically, or when dust / dirt are visible, the gloss standard should be cleaned to ensure measurement accuracy. 10 packs of cleaning wipes are included with each new DeFelsko GLS kit. This item is also a set of 10 wipes, and is available separately as a replacement order item. MPN: GLSCLEANKIT
Part Number Purchase Price INDGLSCLEANKIT $10.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$10.00
-
-
Peak-to-valley height (aka Surface Profile) is a critical measurement for calculating expected coating performance, meeting coating manufacturer specifications, and estimating coverage requirements. Measuring surface profile has been done successfully for over 50 years with the Testex replica tape and spring micrometers. DeFelsko offers multiple Analog options for these spring micrometers (aka Snap Gages, or Dial Thickness Gages), as follows:
- Certified. Available in:
- Imperial / Mils
- Metric / Microns
- Non-Certified. Available in:
- Imperial / Mils
- Metric / Microns
- Linearized in Mils
- Package Options. Available as:
- Basic Micrometer kits (aka Dial Thickness Gage Micrometer), including choice of snap gage, plastic burnishing tool, carrying case, instructions & 1 year warranty.
- Complete kits (aka Replica Tape Kits), including Basic kit above as well as Training Surface Tool, and 1 roll each of Testex Press-O-Film Coarse and X-Coarse tapes.
- (Digital Replica Tape Readers also available, see details on their separate page.)
- Certified. Available in:
-
The PosiTector® 200 - DeFelsko's solution for measuring coating thicknesses on non-metallic substrates. Capable and configurable, it has the following highlights:
- Familiar. Built on the tried-and-true PosiTector® gauge body platform / interchangeable measurement probe design.
- Capable. Three separate probe designs available for the following applications:
- PRB200B: Polymer coatings on wood, plastic, etc. up to 40 mils
- PRB200C: Coatings on concrete, fiberglass, etc., from 2-150 mils
- PRB200D: Thick/soft coatings such as polyurea, etc. from 2-300 mils
- Configurable. Available as follows:
- Probe only. Use with your existing PosiTector® gauge.
- Standard PosiTector® package with choice of probe.
- Advanced PosiTector® package with choice of probe.
- Note: All PosiTector® 200 packages come with case, ultrasonic gel, calibration certificate, shims, and more.
-
The innovative and capable PosiTector Gage / Body is the backbone of a large and growing family of DeFelsko inspection equipment. When paired with 1 of the over 10 interchangeable probes, it can measure and store data for common environmental, surface, coating and more conditions. DeFelsko offers two versions of gauges (Standard and Advanced) which can be purchased individually, or in a variety of DeFelsko Body / Probe packages including 1 or more probes, depending on the application. A comparison list of the feature differences of the Standard and Advanced bodies follows:
- Economical Standard Body:
- Storage of up to 1000 readings per probe (newly up from 250), available for viewing or downloading.
- Connectible Advanced Body:
- Storage of up to 250,000 readings from mulitple probes (newly up from 100,000) in up to 1000 batches
- Touchscreen keyboard makes renaming batches, adding notes, etc., more convenient than ever
- Scan mode, can take continuous readings without lifting the probe and provides 3 ways to treat the data
- WiFi and Bluetooth 4.0 technology for data transfer to mobile devices, printers, and even 3rd party software
- Pre-programmed to help compliance with SSPC-PA 2, ISO 19840 and other standards
- New Display: Now with a 15% larger screen (2.8" across)
- Upgraded Construction: New weatherproof, dustproof & water-resistant IP65 rated enclosure w/shock absorbing holster
- Advanced Electronics: Now the same batteries last up to 30% longer
- On-Gage Support: Functions now have a Help button to explain the feature and operation. Much easier than a manual!
- Economical Standard Body:
-
INYKITC-US
- Recommended for large inspection projects, complex specifications and regular use
- Covers coating thickness, surface profile, climatic conditions and adhesion testing and surface chloride testing
- Items in this kit include:
- PaintGage coating thickness gage - memory model, separate or integral probe with software
- Certified coated thickness standard
- DewCheck electronic climatic gage
- 10 x aluminum wet film combs to 1 to 80 mil (25 to 2032 micron) range
- Magnetic surface thermometer -22°F to +122°F (-30°C to +50°C) range
- Testex surface profile test kit - includes dial thickness gage, 100 Testex tape tests and burnishing tools
- Surface comparators with illuminated magnifier
- Cross hatch adhesion test kit - includes cross hatch cutter and ISO roll of tape
- S20 hazardous area inspection light
- Five x Chlor*Test surface chloride tests
- Retractable inspection mirror
INYKITC-US- Recommended for large inspection projects, complex specifications and regular use
- Covers coating thickness, surface profile, climatic conditions and adhesion testing and surface chloride testing
- Items in this kit include:
- PaintGage coating thickness gage - memory model, separate or integral probe with software
- Certified coated thickness standard
- DewCheck electronic climatic gage
- 10 x aluminum wet film combs to 1 to 80 mil (25 to 2032 micron) range
- Magnetic surface thermometer -22°F to +122°F (-30°C to +50°C) range
- Testex surface profile test kit - includes dial thickness gage, 100 Testex tape tests and burnishing tools
- Surface comparators with illuminated magnifier
- Cross hatch adhesion test kit - includes cross hatch cutter and ISO roll of tape
- S20 hazardous area inspection light
- Five x Chlor*Test surface chloride tests
- Retractable inspection mirror
Part Number Purchase Price INYKITC-US $4,447.23 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$4,447.23
-
-
INYKITA-US
- Items in this kit include:
- Standard Coating Thickness Gauge
- Wet Film Thickness Combs
- Whirling Hygrometer
- Magnetic Surface Thermometer
- Testex Surface Profile Test Kit
- The BlastOne range of coating inspection kits facilitate for every type of coating inspector - protective coating, industrial, marine, etc.
- Three 'off the shelf' kits are available - will suit a diverse range of inspection applications
- Custom designed kits are also available - please discuss your requirements and application with BlastOne
INYKITA-US- Items in this kit include:
- Standard Coating Thickness Gauge
- Wet Film Thickness Combs
- Whirling Hygrometer
- Magnetic Surface Thermometer
- Testex Surface Profile Test Kit
- The BlastOne range of coating inspection kits facilitate for every type of coating inspector - protective coating, industrial, marine, etc.
- Three 'off the shelf' kits are available - will suit a diverse range of inspection applications
- Custom designed kits are also available - please discuss your requirements and application with BlastOne
Part Number Purchase Price INYKITA-US $1,469.83 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$1,469.83
-
- Items in this kit include:
-
INDPOSIPEN
- Ideal for use on small, hot or hard-to-reach surfaces
- Compact - the size of a ball-point pen
- Rugged - unaffected by mechanical shock, acid, oil, water and dust
- No user adjustment needed
- Wear-resistant probe tip ensures long life and reliable accuracy
- Certificate of calibration showing traceability to PTB included
- Conforms to ASTM D7091/B499, ISO 2808 and others
INDPOSIPEN- Ideal for use on small, hot or hard-to-reach surfaces
- Compact - the size of a ball-point pen
- Rugged - unaffected by mechanical shock, acid, oil, water and dust
- No user adjustment needed
- Wear-resistant probe tip ensures long life and reliable accuracy
- Certificate of calibration showing traceability to PTB included
- Conforms to ASTM D7091/B499, ISO 2808 and others
Part Number Purchase Price INDPOSIPEN $265.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$265.00
-
-
INDPRBEXT
- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
INDPRBEXT- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
-
INDCHDTMAG10X
Use for visual assessment of scratch and gouge marks.
INDCHDTMAG10XUse for visual assessment of scratch and gouge marks.
Part Number Purchase Price INDCHDTMAG10X $25.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$25.00
-
-
INDDTKIT
The PosiTest® DT Dust Tape Kit assesses the quantity and size of dust particles on blast cleaned surfaces. It includes the following:
- Roll of ISO 8502-3 Tape (25 mm wide)
- Scissors
- Illuminated 10x Magnifier (with batteries)
- Dust Test Comparator
- Transparent Display Boards
- Report Forms (pack of 25)
- Multi-Language Instruction Manual
- Hard Shell Plastic Case with custom foam insert
NOTE: PosiTest DT Dust Tape Roller is sold separately.
INDDTKITThe PosiTest® DT Dust Tape Kit assesses the quantity and size of dust particles on blast cleaned surfaces. It includes the following:
- Roll of ISO 8502-3 Tape (25 mm wide)
- Scissors
- Illuminated 10x Magnifier (with batteries)
- Dust Test Comparator
- Transparent Display Boards
- Report Forms (pack of 25)
- Multi-Language Instruction Manual
- Hard Shell Plastic Case with custom foam insert
NOTE: PosiTest DT Dust Tape Roller is sold separately.
Custom designed kits are also available – please discuss your requirements and application with your Blast-One™ dealer. BlastOne Supplies Dry Film Thickness Gauges (DFT), Wet Film Thickness Gauges (WFT), Paint Gauges & other Coating Thickness Gauges, probes, and instruments. BlastOne is the leading supplier of coating & paint thickness gauges & instruments
Wet Film Thickness
Wet film thickness is the thickness of a liquid coating after it has been applied to a surface. It is important to measure wet film thickness to ensure that the correct amount of coating has been applied. Too much coating can lead to problems such as runs and sags, while too little coating can lead to poor adhesion and corrosion.
There are a number of ways to measure wet film thickness, including:
Dipsticks: Dipsticks are simple and inexpensive, but they are not very accurate.
Tape measures: Tape measures are more accurate than dipsticks, but they can be difficult to use on curved surfaces.
Gauges: Gauges are the most accurate way to measure wet film thickness, but they can be expensive.
Dry Film Thickness
Dry film thickness is the thickness of a liquid coating after it has dried. It is important to measure dry film thickness to ensure that the correct amount of coating has been applied and that the coating is adhering properly. Too much coating can lead to problems such as runs and sags, while too little coating can lead to poor adhesion and corrosion.
There are a number of ways to measure dry film thickness, including:
Magnetic gauges: Magnetic gauges are used for ferrous metals.
Ultrasonic gauges: Ultrasonic gauges are used for both ferrous and non-ferrous metals.
Thickness probes: Thickness probes are used for non-magnetic materials.
Defelsko
Defelsko is a company that manufactures a variety of coating thickness measuring instruments, gauges, and probes. Defelsko instruments are known for their accuracy and durability.
If you are looking for a coating thickness measuring instrument, Defelsko is a good option to consider. Defelsko offers a wide range of instruments to suit different needs and budgets.
