My Account
All Products
Showing 241–255 of 1320 results
-
IPC1002- IPC1002 RB-1 Replacement Rotating Head
- For IPC1000 RotorBlast
- Note: This item is also included in Spare Parts Kit, IPC1099
- Note: This item does not include nozzles. See part IPC1000 for nozzle recommendations.
IPC1002- IPC1002 RB-1 Replacement Rotating Head
- For IPC1000 RotorBlast
- Note: This item is also included in Spare Parts Kit, IPC1099
- Note: This item does not include nozzles. See part IPC1000 for nozzle recommendations.
-
IPC1018- IPC1018, RB-13 Replacement Rubber-lined Nipple
- For IPC1000 RotorBlast
- Note: Two of these are also included in Spare Parts Kit, IPC1099
IPC1018- IPC1018, RB-13 Replacement Rubber-lined Nipple
- For IPC1000 RotorBlast
- Note: Two of these are also included in Spare Parts Kit, IPC1099
-
IPC1013A- IPC1013A, RB-10-2 Replacement Dust Seal
- Dust Seals are the main wear item in the RotorBlast - this is an optional longer-life version than the standard leather type
- For IPC1000 RotorBlast
IPC1013A- IPC1013A, RB-10-2 Replacement Dust Seal
- Dust Seals are the main wear item in the RotorBlast - this is an optional longer-life version than the standard leather type
- For IPC1000 RotorBlast
-
GV2410321L- Extended-length version of replacement half-nipple for Tri-Clover
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Note: This extended-length version is recommended when the tri-clover is used by itself (without the union-end ball valve)
GV2410321L- Extended-length version of replacement half-nipple for Tri-Clover
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Note: This extended-length version is recommended when the tri-clover is used by itself (without the union-end ball valve)
Part Number Purchase Price GV2410321L $80.25 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$80.25
-
-
IPC1011- IPC1011, RB-7 Replacement Tube Lock Ring
- For IPC1000 RotorBlast
- Note: 2 of these are also included in Spare Parts Kit, IPC1099
IPC1011- IPC1011, RB-7 Replacement Tube Lock Ring
- For IPC1000 RotorBlast
- Note: 2 of these are also included in Spare Parts Kit, IPC1099
-
IPC1014- IPC1014, RB-12 Replacement Tungsten Carbide Washer
- For IPC1000 RotorBlast
- Note: 2 of these items are also included in Spare Parts Kit, IPC1099
- Caution: Tungsten Carbide is brittle - handle with care!
IPC1014- IPC1014, RB-12 Replacement Tungsten Carbide Washer
- For IPC1000 RotorBlast
- Note: 2 of these items are also included in Spare Parts Kit, IPC1099
- Caution: Tungsten Carbide is brittle - handle with care!
-
GV2410320SP- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
GV2410320SP- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
Part Number Purchase Price GV2410320SP $148.27 Tri-Clover Sanitary Quick Connector Assembly with spring-loaded collar
Part #GV2410320SP
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$148.27
-
-
IPC4005Replacement part for Coneblast.
Note - this is 1 of 2 required - see IPC4004 for the other one.IPC4005Replacement part for Coneblast.
Note - this is 1 of 2 required - see IPC4004 for the other one. -
IPC4003Replacement parts for ConeBlast Internal Pipe Blaster.
Includes Throat Rod as shown.
NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C.IPC4003Replacement parts for ConeBlast Internal Pipe Blaster.
Includes Throat Rod as shown.
NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C. -
IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster.
Includes throat rod as shown.
NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003.IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster.
Includes throat rod as shown.
NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003. -
IPC4004Replacement part for ConeBlast
Note: This is one of two that are required - see IPC4005 for the other one.IPC4004Replacement part for ConeBlast
Note: This is one of two that are required - see IPC4005 for the other one. -
BlastOne stocks all accessories and supplies for the DeFelsko PosiTest® LPD pinhole detectors. This category has the replacment sponges and sponge hardware. Details as follows:
- Adaptable sponge hardware for a variety of test configurations
- 8" and 18" square sheet sponges for cutting custom shapes
- 7" and 24" wide roller wands, including initial sponges
- Replacement sponges to use in rectangular or roller holders. Note: roller sponges are 30mm wide, with 6 being used in the 7" wand, and 19 being used in the 24" wand.
-
FREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Day Manufacturer Warranty
- Versatile! No need to have separate wet and dry blast equipment. Wet blast or dry blast with a single unit
- Minimal water usage (less than 1 pint / ½ litre per minute) with proprietary Schmidt M.I.S.T.™ technology that allows precise control of the amount of water injected into the air stream while blasting
- Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
- Schmidt TeraValve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
- Wide range of blasting pressure capabilities from 10 to 150 psi
- Toggle between wet blast, dry blast, wash-down and blow-off using a single control panel
- This version has a 3.5 C.F. capacity. Other sizes are available upon request - enquire.
Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
IND500DPM1Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, wind speed, and difference between surface and dew point temperatures.
PosiTector DPM standard gauge bodies include...
- Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation
- Weatherproof, dustproof, and water-resistant—IP65-rated enclosure
- Fast response precision sensors provide accurate, repeatable readings
- Auto Log mode records environmental parameters at user selected time intervals
- PosiTector interchangeable platform — attach any PosiTector probe to a single gauge body
IND500DPM1Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, wind speed, and difference between surface and dew point temperatures.
PosiTector DPM standard gauge bodies include...
- Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation
- Weatherproof, dustproof, and water-resistant—IP65-rated enclosure
- Fast response precision sensors provide accurate, repeatable readings
- Auto Log mode records environmental parameters at user selected time intervals
- PosiTector interchangeable platform — attach any PosiTector probe to a single gauge body
Part Number Purchase Price IND500DPM1 $786.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$786.00
-
-
INYKITC-US- Recommended for large inspection projects, complex specifications and regular use
- Covers coating thickness, surface profile, climatic conditions and adhesion testing and surface chloride testing
- Items in this kit include:
- PaintGage coating thickness gage - memory model, separate or integral probe with software
- Certified coated thickness standard
- DewCheck electronic climatic gage
- 10 x aluminum wet film combs to 1 to 80 mil (25 to 2032 micron) range
- Magnetic surface thermometer -22°F to +122°F (-30°C to +50°C) range
- Testex surface profile test kit - includes dial thickness gage, 100 Testex tape tests and burnishing tools
- Surface comparators with illuminated magnifier
- Cross hatch adhesion test kit - includes cross hatch cutter and ISO roll of tape
- S20 hazardous area inspection light
- Five x Chlor*Test surface chloride tests
- Retractable inspection mirror
INYKITC-US- Recommended for large inspection projects, complex specifications and regular use
- Covers coating thickness, surface profile, climatic conditions and adhesion testing and surface chloride testing
- Items in this kit include:
- PaintGage coating thickness gage - memory model, separate or integral probe with software
- Certified coated thickness standard
- DewCheck electronic climatic gage
- 10 x aluminum wet film combs to 1 to 80 mil (25 to 2032 micron) range
- Magnetic surface thermometer -22°F to +122°F (-30°C to +50°C) range
- Testex surface profile test kit - includes dial thickness gage, 100 Testex tape tests and burnishing tools
- Surface comparators with illuminated magnifier
- Cross hatch adhesion test kit - includes cross hatch cutter and ISO roll of tape
- S20 hazardous area inspection light
- Five x Chlor*Test surface chloride tests
- Retractable inspection mirror
Part Number Purchase Price INYKITC-US $4,447.23 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$4,447.23
-
