My Account
All Products
Showing 256–270 of 1327 results
-
IPC4003Replacement parts for ConeBlast Internal Pipe Blaster.
Includes Throat Rod as shown.
NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C.IPC4003Replacement parts for ConeBlast Internal Pipe Blaster.
Includes Throat Rod as shown.
NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C. -
IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster.
Includes throat rod as shown.
NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003.IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster.
Includes throat rod as shown.
NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003. -
IPC4004Replacement part for ConeBlast
Note: This is one of two that are required - see IPC4005 for the other one.IPC4004Replacement part for ConeBlast
Note: This is one of two that are required - see IPC4005 for the other one. -
BlastOne stocks all accessories and supplies for the DeFelsko PosiTest® LPD pinhole detectors. This category has the replacment sponges and sponge hardware. Details as follows:
- Adaptable sponge hardware for a variety of test configurations
- 8" and 18" square sheet sponges for cutting custom shapes
- 7" and 24" wide roller wands, including initial sponges
- Replacement sponges to use in rectangular or roller holders. Note: roller sponges are 30mm wide, with 6 being used in the 7" wand, and 19 being used in the 24" wand.
-
FREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Day Manufacturer Warranty
- Versatile! No need to have separate wet and dry blast equipment. Wet blast or dry blast with a single unit
- Minimal water usage (less than 1 pint / ½ litre per minute) with proprietary Schmidt M.I.S.T.™ technology that allows precise control of the amount of water injected into the air stream while blasting
- Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
- Schmidt TeraValve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
- Wide range of blasting pressure capabilities from 10 to 150 psi
- Toggle between wet blast, dry blast, wash-down and blow-off using a single control panel
- This version has a 3.5 C.F. capacity. Other sizes are available upon request - enquire.
Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
IND500DPM1Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, wind speed, and difference between surface and dew point temperatures.
PosiTector DPM standard gauge bodies include...
- Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation
- Weatherproof, dustproof, and water-resistant—IP65-rated enclosure
- Fast response precision sensors provide accurate, repeatable readings
- Auto Log mode records environmental parameters at user selected time intervals
- PosiTector interchangeable platform — attach any PosiTector probe to a single gauge body
IND500DPM1Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, wind speed, and difference between surface and dew point temperatures.
PosiTector DPM standard gauge bodies include...
- Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation
- Weatherproof, dustproof, and water-resistant—IP65-rated enclosure
- Fast response precision sensors provide accurate, repeatable readings
- Auto Log mode records environmental parameters at user selected time intervals
- PosiTector interchangeable platform — attach any PosiTector probe to a single gauge body
Part Number Purchase Price IND500DPM1 $786.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$786.00
-
-
INYKITC-US- Recommended for large inspection projects, complex specifications and regular use
- Covers coating thickness, surface profile, climatic conditions and adhesion testing and surface chloride testing
- Items in this kit include:
- PaintGage coating thickness gage - memory model, separate or integral probe with software
- Certified coated thickness standard
- DewCheck electronic climatic gage
- 10 x aluminum wet film combs to 1 to 80 mil (25 to 2032 micron) range
- Magnetic surface thermometer -22°F to +122°F (-30°C to +50°C) range
- Testex surface profile test kit - includes dial thickness gage, 100 Testex tape tests and burnishing tools
- Surface comparators with illuminated magnifier
- Cross hatch adhesion test kit - includes cross hatch cutter and ISO roll of tape
- S20 hazardous area inspection light
- Five x Chlor*Test surface chloride tests
- Retractable inspection mirror
INYKITC-US- Recommended for large inspection projects, complex specifications and regular use
- Covers coating thickness, surface profile, climatic conditions and adhesion testing and surface chloride testing
- Items in this kit include:
- PaintGage coating thickness gage - memory model, separate or integral probe with software
- Certified coated thickness standard
- DewCheck electronic climatic gage
- 10 x aluminum wet film combs to 1 to 80 mil (25 to 2032 micron) range
- Magnetic surface thermometer -22°F to +122°F (-30°C to +50°C) range
- Testex surface profile test kit - includes dial thickness gage, 100 Testex tape tests and burnishing tools
- Surface comparators with illuminated magnifier
- Cross hatch adhesion test kit - includes cross hatch cutter and ISO roll of tape
- S20 hazardous area inspection light
- Five x Chlor*Test surface chloride tests
- Retractable inspection mirror
Part Number Purchase Price INYKITC-US $4,447.23 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$4,447.23
-
-
INYKITA-US- Items in this kit include:
- Standard Coating Thickness Gauge
- Wet Film Thickness Combs
- Whirling Hygrometer
- Magnetic Surface Thermometer
- Testex Surface Profile Test Kit
- The BlastOne range of coating inspection kits facilitate for every type of coating inspector - protective coating, industrial, marine, etc.
- Three 'off the shelf' kits are available - will suit a diverse range of inspection applications
- Custom designed kits are also available - please discuss your requirements and application with BlastOne
INYKITA-US- Items in this kit include:
- Standard Coating Thickness Gauge
- Wet Film Thickness Combs
- Whirling Hygrometer
- Magnetic Surface Thermometer
- Testex Surface Profile Test Kit
- The BlastOne range of coating inspection kits facilitate for every type of coating inspector - protective coating, industrial, marine, etc.
- Three 'off the shelf' kits are available - will suit a diverse range of inspection applications
- Custom designed kits are also available - please discuss your requirements and application with BlastOne
Part Number Purchase Price INYKITA-US $1,469.83 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$1,469.83
-
- Items in this kit include:
-
INE134CSN- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
INE134CSN- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
-
INDSMLINK- Turns your cell phone or tablet into a virtual PosiTector gauge
- Accepts coating thickness, environmental and surface profile probes
- Mobile integration operates via bluetooth - no internet connection required
- Kit includes holster with belt clip, wrist strap, PosiTector app, batteries
- Probes purchased separately
INDSMLINK- Turns your cell phone or tablet into a virtual PosiTector gauge
- Accepts coating thickness, environmental and surface profile probes
- Mobile integration operates via bluetooth - no internet connection required
- Kit includes holster with belt clip, wrist strap, PosiTector app, batteries
- Probes purchased separately
-
The GMA GX2 ToughBlast Garnet Abrasive (P-GX2) is a high-performance abrasive designed for challenging industrial maintenance tasks. Offering a high surface profile from 3.0 - 3.75 mil, this abrasive ensures an exceptionally clean surface, perfect for high build coatings. With blasting rates up to 370 ft²/hr and a low to medium dust factor, it's ideal for rapidly removing heavy coatings and rust, especially in heavy-duty environments like offshore rigs and ship hulls.
- High surface profile from 3.0 - 3.75 mil for optimal coating preparation
- Blasting rates up to 370 ft²/hr for efficient operation
- Consumption rate of 1.5 - 3.0 lb/ft²
- Low to medium dust factor for cleaner work conditions
- Available in mesh sizes 16 and 36
- Packaged in 4400lb bulk bags, sold by the pallet
- MilSpec Approved for top-grade quality
-
INE142K- Dust Tape Test Kit to measure surface dust
- Used in accordance with Standards ISO 8502-3
- Comes with a Sturdy Binder to hold all forms, visual comparator, tape, scissors, and illuminated magnifier
- 10X Illuminated Magnifier
INE142K- Dust Tape Test Kit to measure surface dust
- Used in accordance with Standards ISO 8502-3
- Comes with a Sturdy Binder to hold all forms, visual comparator, tape, scissors, and illuminated magnifier
- 10X Illuminated Magnifier
-
The GMA GX1 SpeedBlast 30/60 Garnet Abrasive (SKU: P-GX1) is a MilSpec Approved, versatile maintenance grade abrasive. Perfect for removing light to medium coatings and rust, it efficiently produces a surface profile from 2.5 – 3.25 mil (65 – 85 µm). With blasting rates up to 350 ft²/hr and a low dust factor, it's ideal for general industrial maintenance, including construction, chemical plants, and more. Packaged in 4400lb bulk bags and available in mesh sizes 30/60 and 80, this garnet abrasive is sold by the pallet.
- MilSpec Approved, high-quality garnet abrasive
- Efficient surface profile creation from 2.5 – 3.25 mil
- Blasting rates up to 350 ft²/hr for rapid surface preparation
- Low consumption rate of 1.5 – 3.0 lb/ft²
- Low dust factor for cleaner operation
- Recyclability rating of 5/10
- Available in mesh sizes 30/60 and 80
- Packaged in 4400lb bulk bags, sold by the pallet
-
INE134RKIT50- Refill kit for CSN Test Kit
- Used to measure surface contamination from Chlorides, Sulphates and Nitrates
- Comes in a Box of 50 Tests
- Shelf life: 18-24 months
- Genuine Parts - Manufactured by ChlorRid
INE134RKIT50- Refill kit for CSN Test Kit
- Used to measure surface contamination from Chlorides, Sulphates and Nitrates
- Comes in a Box of 50 Tests
- Shelf life: 18-24 months
- Genuine Parts - Manufactured by ChlorRid
Part Number Purchase Price INE134RKIT50 $2,260.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$2,260.00
-
-
CHE132C- Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
- Typically used as part of the surface preparation process prior to application of coatings.
- Apply using a pressure washer before you blast.
- Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
- Sold in 5-gallon drums
- Genuine products - manufactured by Chlor-Rid
CHE132C- Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
- Typically used as part of the surface preparation process prior to application of coatings.
- Apply using a pressure washer before you blast.
- Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
- Sold in 5-gallon drums
- Genuine products - manufactured by Chlor-Rid
