My Account
All Products
Showing 286–300 of 1328 results
-
This glove delivers superior chemical resistance (including to MEK) and has the following specifications:- 5-layer LLDPE laminated film, giving protection to solvents, chemicals, and microbes.
- Very thin - 2.4 mils - often worn with another glove on top to provide greater mechanical protection.
- Effective protection against the largest number of chemicals. See Documents tab for specific chemical protection chart.
-
- Polyester knit lining w/ribbed sleeves
- Palms are Microfoam treated latex
- Breathable mesh fabric back
- Sold as a Box of 120 Pairs
- Construction, masonry, tile installation, and roofing are common applications for these.
-
IPC1008- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
IPC1008- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
-
INDHHDPAD- Use with rolling spring electrodes to precisely locate holidays
- Manufacturer part# HHDPADDLE
- Made in the USA
- Note: Accidental contact with the electrode may result in an electric shock. Use with caution
INDHHDPAD- Use with rolling spring electrodes to precisely locate holidays
- Manufacturer part# HHDPADDLE
- Made in the USA
- Note: Accidental contact with the electrode may result in an electric shock. Use with caution
-
- Rods: choose between 5" (13cm) and 20" (50cm)
- Replacement electrode rod thumb screws - sold in packs of 3
- Manufacturer part #'s:
- HHDEXTRODS
- HHDEXTRODL
- HHDTHMBSCR
- Made in the USA
-
Reduce the investment required to convert to PosiTest® HHD equipment by using these adaptors. Makes other brands of brush and spring electrodes compatible with DeFelsko High Voltage Holiday Detectors. (Adaptor not required for SPY electrodes)
- Three adaptors available with MPN's shown, as follows:
- HHDPCWIADPT - PCWI Adaptor
- HHDTRADPT - Tinker & Rasor Adaptor
- HHD266ADPT - 266 and 280 Adaptor
- Three adaptors available with MPN's shown, as follows:
-
INDUSBACThe DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.
- Designed for uninterrupted use of PosiTector® devices
- Includes USB cable and AC power adapter for versatile power options
- Compatible with a wide range of PosiTector® models
- Selection of electrical plugs for international compatibility
- Ideal for continuous operation without battery dependency
INDUSBACThe DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.
- Designed for uninterrupted use of PosiTector® devices
- Includes USB cable and AC power adapter for versatile power options
- Compatible with a wide range of PosiTector® models
- Selection of electrical plugs for international compatibility
- Ideal for continuous operation without battery dependency
-
INDDPMLFILTERThis 10 pack of filters is specifically designed to maintain the pristine condition of your environmental monitoring device. Ideal for professionals committed to precise and reliable measurements, these filters protect your investment, keeping your device operational in any condition.
- 10 pack of replacement filters designed for the PosiTector® DPM L
INDDPMLFILTERThis 10 pack of filters is specifically designed to maintain the pristine condition of your environmental monitoring device. Ideal for professionals committed to precise and reliable measurements, these filters protect your investment, keeping your device operational in any condition.
- 10 pack of replacement filters designed for the PosiTector® DPM L
Part Number Purchase Price INDDPMLFILTER $15.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$15.00
-
-
- Available in 25' or 50' lengths
- Manufacturer part #'s:
- 25' - HHDGND25
- 50' - HHDGND50
-
IN700ADK- ResinLab EP1 1HT 2-Part Epoxy with additional glue, mixing sticks, palettes and cotton swabs
- Approximate Epoxy Yield*
- 10mm: ~400 dollies
- 14mm: - 200 dollies
- 20mm: - 100 dollies
- 50mm: - 16 dollies
*Actual results will vary based on amount of epoxy used per dolly and waste.
- Manufacturer part# ATADHESIVEKIT
- Made in the USA
IN700ADK- ResinLab EP1 1HT 2-Part Epoxy with additional glue, mixing sticks, palettes and cotton swabs
- Approximate Epoxy Yield*
- 10mm: ~400 dollies
- 14mm: - 200 dollies
- 20mm: - 100 dollies
- 50mm: - 16 dollies
*Actual results will vary based on amount of epoxy used per dolly and waste.
- Manufacturer part# ATADHESIVEKIT
- Made in the USA
-
INDHHDFANBRSHBlastOne offers all replacement parts for DeFelsko industrial testing equipment on-line for easy ordering, access to instructional material, etc.
This 6" stainless steel fan brush for the PosiTest HHD series is compatible with the original HHD and the HHD C units, and come standard with each new unit. It is available as a replacement part here.
MPN: HHDFANBRSH
INDHHDFANBRSHBlastOne offers all replacement parts for DeFelsko industrial testing equipment on-line for easy ordering, access to instructional material, etc.
This 6" stainless steel fan brush for the PosiTest HHD series is compatible with the original HHD and the HHD C units, and come standard with each new unit. It is available as a replacement part here.
MPN: HHDFANBRSH
Part Number Purchase Price INDHHDFANBRSH $30.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$30.00
-
-
INDHHDCOUPLER- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
INDHHDCOUPLER- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
Part Number Purchase Price INDHHDCOUPLER $116.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$116.00
-
-
INDCMMEXTThe Telescopic Extender is designed to enhance ease and efficiency. This lightweight device allows for ergonomic moisture measurements on large surfaces without the discomfort of bending or kneeling.
- Lightweight, ergonomic design for comfortable use.
- Length: 18.5 inches (collapsed) and up to 49 inches (extended)
- Secure ¼”-20 threaded mounting point for easy attachment.
- Optimized for use with the PosiTest CMM Concrete Moisture Meter.
- Ideal for quick, large surface moisture evaluations.
INDCMMEXTThe Telescopic Extender is designed to enhance ease and efficiency. This lightweight device allows for ergonomic moisture measurements on large surfaces without the discomfort of bending or kneeling.
- Lightweight, ergonomic design for comfortable use.
- Length: 18.5 inches (collapsed) and up to 49 inches (extended)
- Secure ¼”-20 threaded mounting point for easy attachment.
- Optimized for use with the PosiTest CMM Concrete Moisture Meter.
- Ideal for quick, large surface moisture evaluations.
-
- Purified, ion-free water to be used with the PosiTector SST
- Available in 250ml or 1L bottles
- Manufacturer part#'s SSTDIWATER / SSTDIWATER1L
-
NA41212- Cotton Drill / canvas material
- PVC dotted palm for improve grip
- Knit cuffs keep dirt and debris from entering the glove
- One size fits all
NA41212- Cotton Drill / canvas material
- PVC dotted palm for improve grip
- Knit cuffs keep dirt and debris from entering the glove
- One size fits all
