All Products

Showing 346–360 of 1300 results

  • Experience safety and comfort with the Bullard Heavy Duty unlined leather Blast Gloves. Crafted using resilient Kevlar thread, these gloves are a fortress for your hands.

    • Extra-long 8-inch cuff: Maximum forearm protection
    • Kevlar thread construction: Exceptional strength and durability
    • Reinforced cowhide palm: Enhanced grip and resilience
    • Pre-curved fingers: Optimal hand mobility
    • Available in sizes Medium - XX-Large
    • Sold by the pair or in a pack of 6

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $55.26 - $342.25

    Ship to 20149

    $55.26$342.25
    • Nylon webbing whipchecks - easier to install, less damaging to hose and will provide a longer service life
    • The use of a whip check restraint is mandatory on all hoses. If you have any questions about the best restraint to use, please contact us directly.

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $64.67 - $128.23

    Ship to 20149

    $64.67$128.23
  • From the makers of the Nova Respirators!

    • GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
    • Extremely lightweight and comfortable.
    • Each mask includes the initial set of filters installed and is ready-to-use.
    • Price shown per-each.  Packed 10 per case, with case discount
    • Multiple filter versions available as follows:
      • Standard P100. These filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns.
      • Standard P100 Starter Kit.  Same as above along with a hard carry case and extra set of filters included.
      • Enhanced P100 w/activated charcoal.  Designed to remove nuisance odors along with P100 filtration.
      • OV / P100.  Removes Organic Vapors along with P100 filtration.  Painters choice!
      • Standard P100 Source Control. Designed for healthcare market and reduces cost and waste as compared to N95 disposable masks.  Side exhaust valves removed.
      • Reuse your respirator over and over again with the low-profile line of GVS replacement filters.  
    • NIOSH Approved TC-84A-8062.

    NOTE - This is the low-profile series.  Standard-profile Elipse Masks (which offers Acid Gas & Multi-Gas filter options) are also available.

     

    As with all close-fitting respirators, these are designed to be used where fit-testing is conducted.  The GVS Portacount Adapter is available to facilitate this testing.

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $38.06 - $81.98

    Ship to 20149

    $38.06$81.98
  • From the makers of the Nova Respirators!

    • GVS Masks are made from TPE and are hypoallergenic and non-irritating.  
    • Extremely lightweight and comfortable. 
    • Each mask includes the initial set of filters installed and is ready-to-use.
    • Price shown per-each.  Packed 5 per case, with case discount.
    • Multiple filter versions available as follows: 
      • Standard P100
      • Enhanced P100 w/Nuisance Odor control
      • OV / P100 - P100 Organic Vapor protection.  Painters favorite!
      •  Reuse your respirator by using the low-profile line of GVS replacement filters, which include a pre-filter option which extends the life of the OV / P100 filter.
    • NIOSH Approved goggles provide ANSI Z87+ eye protection.  
    • Goggles are scratch and fog resistant.  Tear-off lenses available separately to keep them clean while spraying 

    NOTE - This is the low-profile series with enhanced field of vision. Standard-profile Integra Masks (which offer Acid Gas & Multi-Gas filter options) are also available. 

    Your regular eyeglasses will not fit under these goggles. However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.

    As with all close-fitting respirators, these are designed to be used where fit testing is conducted.  The GVS Portacount Adaptor is available to facilitate this testing.  

     

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $66.32 - $100.13

    Ship to 20149

    $73.30$100.13
  • From the makers of the Nova Respirators!

    • GVS Masks are made from TPE and are hypoallergenic and non-irritating. 
    • Extremely lightweight and comfortable. 
    • Each mask includes the initial set of filters installed and is ready-to-use.
    • Price shown per-each.  Packed 4 per case, with case discount.
    • Multiple filter versions available as follows: 
      • OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
      • OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates. 
        • Solvents
        • Chlorine and Chlorine Dioxide
        • Hydrogen Chloride and Hydrogen Fluoride 
        • Sulphur Dioxide 
        • Organic Vapors
      • Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gasses. All acid gases above, plus:
        • Ammonia 
        • Formaldehyde
        • Hydrogen Sulfide
        • Methylamine 
      • Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates. 
      • Keep your respirator fresh with the standard-profile line of GVS replacement filters.
    • NIOSH Approved with ANSI Z87+ eye protection
    • Goggles are scratch and fog resistant.  Tear-off lenses available separately to keep them clean while spraying.

    NOTE - This is the standard-profile series, which has the largest variety of protective filters.  Low-profile Integra Masks (which offer an enhanced field of vision) are also available. 

    Your regular eyeglasses will not fit under these goggles.  However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.

    As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adaptor is available to facilitate this testing. 

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $72.83 - $93.82

    Ship to 20149

    $80.49$93.82
    • #1 mask used by painters in USA
    • Comfortable, lightweight and durable mask.
    • Low Breathing resistance
    • Filters available for gas and particulate protection.
    • Genuine Parts - Manufactured by 3M Safety

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $21.21

    Ship to 20149

    $21.21
  • Replacement filter cartridges to suit GVS Elipse and Integra Standard-Profile half-masks. 

    • OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates. 
    • OV / P100. Protects against organic gases and particulates. 
    • Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases. 
    • Multi-Gas P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates. 

    NOTE - This is the standard-profile series. The low-profile series is available here.

    Genuine GVS product. 

     

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $24.75 - $34.09

    Ship to 20149

    $27.35$34.09
  • This safety glove offers robust protection against common hazards and is constructed of breathable 13 gauge HPPE with high-vis TPR rubber backing. It offers the following protections: 

    • Impact. ANSI Level 2
    • Cut. ANSI Level 5 
    • Puncture. ANSI Level 5
    • Abrasion. ANSI  Level 5

    It has a Velcro closure and includes reinforced pad between thumb and forefinger for extended durability. 

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $10.00 - $12.00

    Ship to 20149

    $10.00$12.00
  • From the makers of the Nova Respirators! 

    • GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
    • Extremely lightweight and comfortable.
    • Each mask includes the initial set of filters installed and is ready-to-use.
    • Price shown per-each.  Packed 8 per case, with case discount.
    • Multiple filter versions available as follows:
      • OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
      • OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
        • Solvents
        • Chlorine and Chlorine Dioxide
        • Hydrogen Chloride and Hydrogen Fluoride
        • Sulphur Dioxide
        • Organic Vapors
      • Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases. All acid gases above, plus:
        • Ammonia
        • Formaldehyde
        • Hydrogen Sulfide
        • Methylamine
      • Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
      • Reuse your respirator over and over again with the standard-profile line of GVS replacement filters.
    • NIOSH Approved TC-84A-8062.

    NOTE - This is the standard profile series. Low-profile Elipse masks are also available. 

    As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $38.59 - $55.98

    Ship to 20149

    $42.65$55.98
  • This two-toned glove is constructed of neoprene and rubber, and is double dipped for added protection. It has the following specifications: 

    • 27 mil thickness - medium weight for greater protection against mechanical hazards
    • Cotton Flock lined for sweat absorption 
    • Diamond-pattern finish for improved grip on both wet and dry surfaces 
    • Intended for plant maintenance, janitorial use, and general chemical handling. See Documents tab for chemical protection chart. 

    Priced by the pair, with dozen and case quantity discounts available. 

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $2.95 - $3.80

    Ship to 20149

    $3.80
  • This all-purpose knit glove offers excellent cut resistance with good dexterity and grip. It has the following specifications: 

    • ANSI cut level A6
    • NBR foam finish
    • 13 gauge gray HPPE (Steel / Nylon / Spandex / Polyester) knit construction 
    • Black palm dip

    Priced by the pair, with quantity discounts available in dozen packs and also 10 dozen cases. 

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $4.90 - $8.40

    Ship to 20149

    $8.40
  • This knit glove is an excellent general purpose glove with good dexterity and grip. It has the following specifications: 

    • ANSI cut level 1 
    • NBR foam finish 
    • 15 gauge gray Nylon / Spandex knit construction 
    • Black palm dip

    Priced by the pair, with quantity discounts available in dozen pair packs and also in 10 dozen cases. 

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $2.40 - $4.20

    Ship to 20149

    $4.20
  • Experience enhanced comfort and safety with the Bullard DC-70 series Air-Fed Cool Vest (SKU: P-BLDCOOLVEST), designed to integrate seamlessly with Bullard cooling tubes. This vest is a must-have for professionals using respirators, especially when paired with the Bullard Dual-Cool tube. For non-respirator use, it's compatible with the AC1000 or CT30DC personal cooling devices. Constructed with a gray nylon outer shell and a breathable cotton inner shell, it's available in versatile sizes: Medium/Large, XL/XXL, and 5XL.
    • Compatible with Bullard cooling tubes for enhanced safety
    • Ideal for use with respirators, especially with the Dual-Cool tube
    • Also works with AC1000 or CT30DC cooling devices when used without a respirator
    • Durable gray nylon outer shell
    • Comfortable, breathable cotton inner shell
    • Available in sizes Medium/Large, XL/XXL, and 5XL

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $160.00 - $270.00

    Ship to 20149

    $160.00$270.00
  • HAB20TICH
    The Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.
    • Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
    • Made from Tychem QC for superior chemical splash protection
    • Wide-angle lens for industry-leading visibility
    • Patented inflatable neck cuff design for comfort and airflow
    • Reusable yet economical for varied application needs
    • NIOSH certified for safety and reliability
    HAB20TICH
    The Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.
    • Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
    • Made from Tychem QC for superior chemical splash protection
    • Wide-angle lens for industry-leading visibility
    • Patented inflatable neck cuff design for comfort and airflow
    • Reusable yet economical for varied application needs
    • NIOSH certified for safety and reliability

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $53.38

    Ship to 20149

    Part Number Purchase Price  
    HAB20TICH
    $53.38
    Bullard CC20 Tychem 2000 Double Bib for Hard Hat

    Part #HAB20TICH

    View Product Details

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $53.38

    -

  • In-Helmet communication systems make communication between a blaster/operator and other team members much easier and safer. RPB respirators are modular, meaning they can be upfitted with this option at any time. Several options available as follows:

    1. Z4 Comms-Link™ Upgrade Kit, includes noise-cancelling microphone, PTT button, and 15-848 padding kit for the Z4.
    2. Z-Link / T-Link Comms-Link™ Upgrade Kit, includes noise cancelling microphone, PTT button, and 16-520-S padding kit to fit either the Z-Link or T-Link.
    3. Z-Link / T-Link / Z4 Headset Package, includes noise-cancelling microphone and PTT button.  This kit does not include padding, and assumes that it will be used with previously-installed padding.  (If you need padding with the kit, purchase one of the Upgrade versions above.  It can also be purchased separately - see Repair Parts list.)
    4. Nova 3 NovaTalk™ Upgrade Kit, including noise-cancelling microphone, PTT button, and padding for the Nova 3.
    5. Nova 2000 NovaTalk™ Upgrade Kit.  Including noise-cancelling microphone, PTT button, and padding for the 2000.
    6. NovaTalk™ R-Tex Headset with PTT, designed for high-noise applications, such as Pot Tender.
    7. NovaTalk™ R-Tex Headset without PTT, designed for high-noise applications, such as Pot Tender.

    Note:  A separate Radio Connection Cable must be purchased to connect to your existing 2-way radio system. Note:  These systems are not rated Intrinsically Safe.  If Intrinsically Safe versions are required, contact us for availability and pricing.

    Web price i
    Please sign in to your account to see your pricing, which may be different from the price displayed.

    $361.22 - $656.98

    Ship to 20149

    $361.22$656.98