All Products
Showing 361–375 of 1320 results
-
IPCRSM900
- Suited to coat pipe internals 12" - 35" (300mm - 875mm)
- 3,600 psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls purchased separately
IPCRSM900- Suited to coat pipe internals 12" - 35" (300mm - 875mm)
- 3,600 psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls purchased separately
-
IPCRSM300
- Suited to coat internal pipes 5" - 12" (125mm - 300mm)
- 3,00psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls sold separately
IPCRSM300- Suited to coat internal pipes 5" - 12" (125mm - 300mm)
- 3,00psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls sold separately
-
IPCRSM100
- Suited for use on pipes 3" - 5" (75mm - 125mm)
- 3,600psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems sold bare - hose and gun ordered separately
IPCRSM100- Suited for use on pipes 3" - 5" (75mm - 125mm)
- 3,600psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems sold bare - hose and gun ordered separately
-
IPC80300
- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
IPC80300- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
-
INEBP45
- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
INEBP45- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
-
IPC80125
- Heavy-duty coating unit
- Ideal for use on 3"-5" (75mm-125mm) pipe internals
- Centering carriage, spray tip and shut-off valve included
- Pressured rated = 3,600psi
- Fastens directly to high-pressure (HP) airless spray pump
IPC80125- Heavy-duty coating unit
- Ideal for use on 3"-5" (75mm-125mm) pipe internals
- Centering carriage, spray tip and shut-off valve included
- Pressured rated = 3,600psi
- Fastens directly to high-pressure (HP) airless spray pump
-
DMMEM200
- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
DMMEM200- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
-
- Robots made by Blastman Robotics specifically for Blastroom applications
- Available as 4-Axis, 7-Axis or 8-Axis.
- Available as Wall Mount or Gantry Mount
- Optional Man cabin for manual blasting which can come mounted on the blasting arm, or as a separate cabin
- 20+ years of installation and robotic experience
- Read here for more pictures of Blastman Blasting Robots
-
- RPB blast suits enhance worker comfort and protect the wearer from abrasive rebound.
- The heavy-duty breathable cotton back helps keep you cool.
- Robust nylon zipper with protective cover
- Heavy-duty nylon gives extra protection to the arms and fronts of legs and has abrasion resistance for a longer life.
- Elasticized waist for a comfortable fit (takes the weight off the operator’s shoulders).
- Elasticized wrist and adjustable ankle cuffs to keep abrasive out.
- Seven different sizes from S to XXXXL.
- Triple stitched.
- Optional Knee Pads are available.
- Suit does not come with a hood.
- Sold Individually
- Genuine Products - Manufactured by RPB Safety
- See also BlastOne's new BlasterAlls Blast Suits
-
- Heavy-duty leather front for protection of arms and legs, extending coverall life.
- Strong cotton back for ventilation and comfort in hot climates.
- Ties at sleeves for adjustable fit, keeping out residue, media, and dust.
- Optional leather gauntlet gloves for added protection of hands and wrists.
- Available in six different sizes, from S to 3XL, ensuring a suitable fit for every operator.
- Press stud closures and Velcro strip fastening for double protection from grit ingress and resistance to damage from steel grit.
- Compatible with Nova3 blast helmets and blast capes (HLNV3752 or HLNV3753) for full leather front protection.
- Designed to meet the most stringent government guidelines.
- Tough cowhide covers ensure protection, while strong cotton back enables suit to ventilate for comfort in hot climates.
- Leather fronted sandblasting suits guarantee protection from harmful abrasive ricochet and momentary direct impact.
- Heavy-duty half leather fronted abrasive blasting suit (leather front extends from the waist down).
- Comfortable 'breathable' cotton back.
- Adjustable wrist and ankle straps.
- Front press stud and Velcro strip fastening.
- Most commonly used when blasting with steel grit media.
- Sold individually.
-
Step up your safety game with the Bullard Heavy Duty Nylon/Cotton Blast Suits. Expertly engineered for the professional blaster, these suits blend durability with comfort.
- Sweat-wicking fabric: Nylon-cotton blend for enhanced airflow
- Robust design: Parallel seams and extra reinforcement
- Optimized for professionals: Feature-rich and long-lasting
- Grey
- Size options: M, L, XL, 2XL, 3XL, 4XL
-
- Nylon webbing whipchecks - easier to install, less damaging to hose and will provide a longer service life
- The use of a whip check restraint is mandatory on all hoses. If you have any questions about the best restraint to use, please contact us directly.
-
From the makers of the Nova Respirators!
- GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 10 per case, with case discount
- Multiple filter versions available as follows:
- Standard P100. These filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns.
- Standard P100 Starter Kit. Same as above along with a hard carry case and extra set of filters included.
- Enhanced P100 w/activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- Standard P100 Source Control. Designed for healthcare market and reduces cost and waste as compared to N95 disposable masks. Side exhaust valves removed.
- Reuse your respirator over and over again with the low-profile line of GVS replacement filters.
- NIOSH Approved TC-84A-8062.
NOTE - This is the low-profile series. Standard-profile Elipse Masks (which offers Acid Gas & Multi-Gas filter options) are also available.
As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.
-
From the makers of the Nova Respirators!
- GVS Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 5 per case, with case discount.
- Multiple filter versions available as follows:
- Standard P100
- Enhanced P100 w/Nuisance Odor control
- OV / P100 - P100 Organic Vapor protection. Painters favorite!
- Reuse your respirator by using the low-profile line of GVS replacement filters, which include a pre-filter option which extends the life of the OV / P100 filter.
- NIOSH Approved goggles provide ANSI Z87+ eye protection.
- Goggles are scratch and fog resistant. Tear-off lenses available separately to keep them clean while spraying
NOTE - This is the low-profile series with enhanced field of vision. Standard-profile Integra Masks (which offer Acid Gas & Multi-Gas filter options) are also available.
Your regular eyeglasses will not fit under these goggles. However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.
As with all close-fitting respirators, these are designed to be used where fit testing is conducted. The GVS Portacount Adaptor is available to facilitate this testing.
-
From the makers of the Nova Respirators!
- GVS Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 4 per case, with case discount.
- Multiple filter versions available as follows:
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gasses. All acid gases above, plus:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine
- Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
- Keep your respirator fresh with the standard-profile line of GVS replacement filters.
- NIOSH Approved with ANSI Z87+ eye protection
- Goggles are scratch and fog resistant. Tear-off lenses available separately to keep them clean while spraying.
NOTE - This is the standard-profile series, which has the largest variety of protective filters. Low-profile Integra Masks (which offer an enhanced field of vision) are also available.
Your regular eyeglasses will not fit under these goggles. However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.
As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adaptor is available to facilitate this testing.