All Products
Showing 46–60 of 1324 results
-
BlastOne offers all DeFelsko products, including testing instruments, their accessories, and related supplies. This group of mechanical gauges use rare-earth cobalt magnets to manually measure coating thickness on ferrous substrates. Additional information:
- Simple. Straightforward and able to be used in any orientation.
- Capable. Scales available in both mils and microns, and in 2 thickness ranges. Can measure coatings on cylindrical surfaces too. Go / No-Go button can be set for rapid measurement.
- Sturdy. Wear-resistant carbide probe and rugged housing for years of service.
-
The PosiTest OTL - DeFelsko's solution to monitor and record temperature profiles in Powder Coating and other industrial ovens. Configurable in various ways, some of it's features include:
- Simple Design. With an easy-to-use interface and bright LED's to indicate logger status, operating the Oven Temperature Logger is simple and intuitive.
- Capable. The DeFelsko OTL can:
- Measure & record up to 40,000 datasets in up to 6 batches. Records temperatures every 2 seconds for up to 22 hours.
- 6 ‘Channels’ (K-type thermocouple ports) for adding temperature probes.
- Configurable. Depending on the specific application, the OTL offers various configurations, such as:
- PosiTest OTLKIT, including logger with barrier box and standard Holder (65 minute endurance at 200° C)
- PosiTest OTLKITXT, same as above, except with heat-sink Holder (200 minute endurance at 200° C)
- (See sliding scale endurance chart on the brochure under the Documents tab)
- OTL logger only without barrier box, for use with temperature probes and when the logger does not need to be in the oven.
-
INDLPDREDWIREThis 15' (4.5m) connection wire (for the wand or paint pole), which is included with the LPD accessory pack or the LPD Cabled Wand kit, is also available separately here. MPN: LPEDREDWIREINDLPDREDWIREThis 15' (4.5m) connection wire (for the wand or paint pole), which is included with the LPD accessory pack or the LPD Cabled Wand kit, is also available separately here. MPN: LPEDREDWIRE
-
BlastOne offers all DeFelsko testing instruments and consumables with easy, on-line ordering capability. This product group includes the Li-Ion batteries used in either the PosiTest HHD or the PosiTest HHD C.
-
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Replacement Caps for Positector® CMM IS measuring probes are available in packs of 4 or 16. The use of these caps is important to ensure the integrity of test results and keep the test monitor protected during testing.
-
INDKITPCSCRNBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These replacement probe screens for the PosiTest PC are included with each new unit, and are available here as replacement parts. MPN: KITPCSCRNINDKITPCSCRNBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These replacement probe screens for the PosiTest PC are included with each new unit, and are available here as replacement parts. MPN: KITPCSCRN
-
INDHHDSTRAPThe DeFelsko HHD shoulder strap, which is included in the full HHD kit, is available separately as a replacement item (or as an optional add-on when purchasing the basic HHD kit).INDHHDSTRAPThe DeFelsko HHD shoulder strap, which is included in the full HHD kit, is available separately as a replacement item (or as an optional add-on when purchasing the basic HHD kit).
-
INDRTRPUTTYRecommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate. This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive. One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.INDRTRPUTTYRecommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate. This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive. One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.
-
DeFelsko oven temperature probes for use with their OTL system: Extend the reach of the logger with the wide selection of probes as follows:
- Applications. Available in both Surface and Air types.
- Mountings. Available in Magnetic, Clamp, and Washer mounts.
- Lengths. Stainless braided cables commonly stocked in 3 lengths, and custom lengths available by special order.
-
INDSTDRTHelp new staff learn the correct way to take tape impressions for measuring surface profile with this Testex training surface. This training tool is precision cut with inverted v-ridges, simulating a 3.1 mil (78 micron) profile. It is recommended for the trainee to take at least 3 readings with X-Coarse Testex tape to provide practice for the amount of pressure needed to obtain accurate readings. This surface training tool is designed for long life, and can be reused over and over again.INDSTDRTHelp new staff learn the correct way to take tape impressions for measuring surface profile with this Testex training surface. This training tool is precision cut with inverted v-ridges, simulating a 3.1 mil (78 micron) profile. It is recommended for the trainee to take at least 3 readings with X-Coarse Testex tape to provide practice for the amount of pressure needed to obtain accurate readings. This surface training tool is designed for long life, and can be reused over and over again.
-
INDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units. MPN: SSTSWABINDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units. MPN: SSTSWAB
-
Z-Link® - The most versatile respirator of all! This multi-purpose full face respirator delivers comfortable protection in grinding, welding, foundry, painting and other applications. A few of the features are as follows:
- Flip-up Visor. Makes communication with co-workers easy.
- Superior comfort. Comfort-Link® padding system is fully adjustable for total size control.
- Maximum protection with the following ANSI approvals:
- Hard Hat (Z89.1)
- Hearing (S3.19), when used in conjunction with the Quiet-Link™ earmuffs. (See below in Options list.)
- Eye and Face (Z87+)
- Welding Eye (Z87w), when equipped with the Z-Link removable welding visor
- Air control options. Both supplied air and battery-powered PAPR systems are available as follows:
- Constant Flow Valve: Basic supplied-air valve allows control of air volume in the hood, but doesn't provide air cooling
- C40: Premium supplied-air valve allows adjustment of air temperature in the hood for cooling & heating
- HX5: Basic PAPR option with single speed control
- PX5: Premium PAPR option with multiple speeds and a vibratory low-battery alarm making it a preferred choice in high-noise environments.
- NOTE - PAPR units do not require tethering to an air-line (making them very portable) but do not provide air cooling (can't use with C40)
- Note: Z-Link® Headtops are also available without any breathing apparatus.
- Cape / Seal Configurations.
- Zytec FR Chin Seal
- Zytec FR Face Seal
- Zytec FR Shoulder Cape
- Tychem 2000 Face Seal
- Tychem 4000 Shoulder Cape
- Optional Accessories and Other Configurations.
- Z-Link® Flip-up welding visor available separately, or in a package as shown in the product grid below
- Z-Link® Radiant Heat versions for foundry and high-heat applications (shown separately in this link)
- Comms-Link® In-Helmet Communication, utilizes existing 2-way radio systems
- Vision-Link® Rechargeable Light, mounts to respirator helping to illuminate dim work areas
- Quiet-Link™ helmet-mounted ear muffs provides rated hearing protection in noisy environments.
-
INDDPMLLOCKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7. This Kensington lock provides security, helping to ensure that the valuable instrument remains secure. MPN: DPMLLOCKINDDPMLLOCKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7. This Kensington lock provides security, helping to ensure that the valuable instrument remains secure. MPN: DPMLLOCK
-
SBPL06
- Designed for offshore and chemical plants
- Foldable mast for easy access to narrow passages and through standard doors
- Working height of up-to 14' 9" high
- Pneumatically operated for safety in explosion areas like paint booths
- CE, CAS, and UL certified, ATEX compliant
SBPL06- Designed for offshore and chemical plants
- Foldable mast for easy access to narrow passages and through standard doors
- Working height of up-to 14' 9" high
- Pneumatically operated for safety in explosion areas like paint booths
- CE, CAS, and UL certified, ATEX compliant