All Products
Showing 1036–1050 of 1316 results
-
BABL2106HLM
- Suits BABL2106 Brickette Blast Area Light
- The Long Handled, High profile Magnetic Handle can be used a multitude of ways including:
- Magnetically attach to steel pipes, beams or walls
- Use the handle to hang over ropes, scaffold tubes or pipework
- The handle is large enough to act as a sturdy base for floor mounting as well
- Sold Individually
- Genuine Part – Manufactured by Western Technology
BABL2106HLM- Suits BABL2106 Brickette Blast Area Light
- The Long Handled, High profile Magnetic Handle can be used a multitude of ways including:
- Magnetically attach to steel pipes, beams or walls
- Use the handle to hang over ropes, scaffold tubes or pipework
- The handle is large enough to act as a sturdy base for floor mounting as well
- Sold Individually
- Genuine Part – Manufactured by Western Technology
-
BABL9610KN
- Suits BABL9610 BRICK LED Blast Light
- Magnetic Knuckle Mount for Brick LED Blast Light
- Allows you to mount the Brick on any surface and at any angle
- Sold Individually
- Genuine Part – Manufactured by Western Technology
BABL9610KN- Suits BABL9610 BRICK LED Blast Light
- Magnetic Knuckle Mount for Brick LED Blast Light
- Allows you to mount the Brick on any surface and at any angle
- Sold Individually
- Genuine Part – Manufactured by Western Technology
-
BABL9610P
- Suits BABL9610 BRICK LED Blast Light
- Magnetic Puck Mount for Brick LED Blast Light
- Allows you to mount the Brick on any steel surface
- Sold Individually
- Genuine Part – Manufactured by Western Technology
BABL9610P- Suits BABL9610 BRICK LED Blast Light
- Magnetic Puck Mount for Brick LED Blast Light
- Allows you to mount the Brick on any steel surface
- Sold Individually
- Genuine Part – Manufactured by Western Technology
-
GXMB4400
- Designed to remove Coating Thickness: 20-50 ml
- Unique formulation, ideal for blasting marine offshore, oil and gas, shipyards
- Typically used where heavy coatings and rust are existing
- Blend has large particles designed to effectively remove heavy coatings and finer particles to thoroughly clean the pits and surface.
- Expected Profile 2.5 - 4.0 ml
- Abrasive Consumption 2.5 - 5.0 lb/ft2
- Blasting Rates up to 370ft2 /hr
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
GXMB4400- Designed to remove Coating Thickness: 20-50 ml
- Unique formulation, ideal for blasting marine offshore, oil and gas, shipyards
- Typically used where heavy coatings and rust are existing
- Blend has large particles designed to effectively remove heavy coatings and finer particles to thoroughly clean the pits and surface.
- Expected Profile 2.5 - 4.0 ml
- Abrasive Consumption 2.5 - 5.0 lb/ft2
- Blasting Rates up to 370ft2 /hr
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
BAMBPDL
- Replacement Pump Mist Blaster, installed in the cabinet
- Used to pressurise and meter the water that is sent to the injector block
- allows you to meter the water accurately to get optimal dust control
- Pump 5:1 Bronze construction
- Dry Lube
BAMBPDL- Replacement Pump Mist Blaster, installed in the cabinet
- Used to pressurise and meter the water that is sent to the injector block
- allows you to meter the water accurately to get optimal dust control
- Pump 5:1 Bronze construction
- Dry Lube
-
BAVAIC6
- Suits BlastOne MistBlaster
- Check Valve Assembly is installed Inline on water hose attached to the injector block at the bottom of the MistBlaster
- Ensure water and abrasive does not flow backwards into the control lines of the MistBlaster
- 1/4 NPT
- Sold individually
- Genuine Parts from BlastOne
BAVAIC6- Suits BlastOne MistBlaster
- Check Valve Assembly is installed Inline on water hose attached to the injector block at the bottom of the MistBlaster
- Ensure water and abrasive does not flow backwards into the control lines of the MistBlaster
- 1/4 NPT
- Sold individually
- Genuine Parts from BlastOne
-
BA120000001
- Suits Axxiom/Schmidt Moisture Separators
- Genuine OEM Part
- AFMSH800 and AFMSH1600
- Often purchased with BA7032005 Handle Bar Grip
BA120000001- Suits Axxiom/Schmidt Moisture Separators
- Genuine OEM Part
- AFMSH800 and AFMSH1600
- Often purchased with BA7032005 Handle Bar Grip
-
HLNV37278
- Mount Kit includes 2 mounts and screws (NV3-727/8)
- Suits RPB Nova3 Blast Helmet
- Used to repair the helmet
- Sold as a complete kit
Genuine Parts - Manufactured by RPB Safety
HLNV37278- Mount Kit includes 2 mounts and screws (NV3-727/8)
- Suits RPB Nova3 Blast Helmet
- Used to repair the helmet
- Sold as a complete kit
Genuine Parts - Manufactured by RPB Safety
-
HTRNC101
- Suits 4" (100 mm) wide Nook and Cranny rollers
- Fabric roller covers
- Come in packs of 10 rollers
HTRNC101- Suits 4" (100 mm) wide Nook and Cranny rollers
- Fabric roller covers
- Come in packs of 10 rollers
-
HTIBIX09NK
- Suits IBIX 6 Easy Blaster (HTIBIX06EB)
- Genuine part – manufactured by IBIX
- Nozzle Kit
- Sold individually
HTIBIX09NK- Suits IBIX 6 Easy Blaster (HTIBIX06EB)
- Genuine part – manufactured by IBIX
- Nozzle Kit
- Sold individually
-
Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type.
Boron Carbide is the longest life version, but not available in all configurations. Polyurethane, steel, aluminum, etc. are also available and are lower in cost.
- Available configurations:
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 1-¼" (32mm) Fine Thread nozzles
- Flange nozzles
- Fine (1-¼" / 32mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 2" / 50mm Contractor thread nozzles. This is a BlastOne Exclusive!
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- Available configurations:
-
BAHNGN5
- Suits the Nozzle Pressure Test Kit
- Size: 18G x 1-½”
- Comes in 5 pack
BAHNGN5- Suits the Nozzle Pressure Test Kit
- Size: 18G x 1-½”
- Comes in 5 pack
-
- Suits AHR general purpose air hose
- Two piece fitting, hose tail to swivel nut female thread
- Various clamping options - double bolt clamp or bandit clamp
- Sold individually
-
BA700751903
- O-Ring Seal for 10” Schmidt blast pot closure 7mm section
- Used to create a complete seal on the top of the megablaster
- Recommend you replace seal at first sign of wear
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
BA700751903- O-Ring Seal for 10” Schmidt blast pot closure 7mm section
- Used to create a complete seal on the top of the megablaster
- Recommend you replace seal at first sign of wear
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing