All Products
Showing 1051–1065 of 1328 results
-
GXMB4400
- Designed to remove Coating Thickness: 20-50 ml
- Unique formulation, ideal for blasting marine offshore, oil and gas, shipyards
- Typically used where heavy coatings and rust are existing
- Blend has large particles designed to effectively remove heavy coatings and finer particles to thoroughly clean the pits and surface.
- Expected Profile 2.5 - 4.0 ml
- Abrasive Consumption 2.5 - 5.0 lb/ft2
- Blasting Rates up to 370ft2 /hr
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
GXMB4400- Designed to remove Coating Thickness: 20-50 ml
- Unique formulation, ideal for blasting marine offshore, oil and gas, shipyards
- Typically used where heavy coatings and rust are existing
- Blend has large particles designed to effectively remove heavy coatings and finer particles to thoroughly clean the pits and surface.
- Expected Profile 2.5 - 4.0 ml
- Abrasive Consumption 2.5 - 5.0 lb/ft2
- Blasting Rates up to 370ft2 /hr
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
BAMBPDL
- Replacement Pump Mist Blaster, installed in the cabinet
- Used to pressurise and meter the water that is sent to the injector block
- allows you to meter the water accurately to get optimal dust control
- Pump 5:1 Bronze construction
- Dry Lube
BAMBPDL- Replacement Pump Mist Blaster, installed in the cabinet
- Used to pressurise and meter the water that is sent to the injector block
- allows you to meter the water accurately to get optimal dust control
- Pump 5:1 Bronze construction
- Dry Lube
-
BAVAIC6
- Suits BlastOne MistBlaster
- Check Valve Assembly is installed Inline on water hose attached to the injector block at the bottom of the MistBlaster
- Ensure water and abrasive does not flow backwards into the control lines of the MistBlaster
- 1/4 NPT
- Sold individually
- Genuine Parts from BlastOne
BAVAIC6- Suits BlastOne MistBlaster
- Check Valve Assembly is installed Inline on water hose attached to the injector block at the bottom of the MistBlaster
- Ensure water and abrasive does not flow backwards into the control lines of the MistBlaster
- 1/4 NPT
- Sold individually
- Genuine Parts from BlastOne
-
BA120000001
- Suits Axxiom/Schmidt Moisture Separators
- Genuine OEM Part
- AFMSH800 and AFMSH1600
- Often purchased with BA7032005 Handle Bar Grip
BA120000001- Suits Axxiom/Schmidt Moisture Separators
- Genuine OEM Part
- AFMSH800 and AFMSH1600
- Often purchased with BA7032005 Handle Bar Grip
-
HLNV37278
- Mount Kit includes 2 mounts and screws (NV3-727/8)
- Suits RPB Nova3 Blast Helmet
- Used to repair the helmet
- Sold as a complete kit
HLNV37278- Mount Kit includes 2 mounts and screws (NV3-727/8)
- Suits RPB Nova3 Blast Helmet
- Used to repair the helmet
- Sold as a complete kit
-
HTRNC101
- Suits 4" (100 mm) wide Nook and Cranny rollers
- Fabric roller covers
- Come in packs of 10 rollers
HTRNC101- Suits 4" (100 mm) wide Nook and Cranny rollers
- Fabric roller covers
- Come in packs of 10 rollers
-
BNATC360CTIP
- Replacement Tungsten Carbide Deflector Tip for BNATC360C internal pipe blasting nozzle.
- Ensures optimal blasting efficiency and durability.
BNATC360CTIP- Replacement Tungsten Carbide Deflector Tip for BNATC360C internal pipe blasting nozzle.
- Ensures optimal blasting efficiency and durability.
-
HTIBIX09NK
- Suits IBIX 6 Easy Blaster (HTIBIX06EB)
- Genuine part – manufactured by IBIX
- Nozzle Kit
- Sold individually
HTIBIX09NK- Suits IBIX 6 Easy Blaster (HTIBIX06EB)
- Genuine part – manufactured by IBIX
- Nozzle Kit
- Sold individually
-
Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type.
Boron Carbide is the longest life version, but not available in all configurations. Polyurethane, steel, aluminum, etc. are also available and are lower in cost.
- Available configurations:
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 1-¼" (32mm) Fine Thread nozzles
- Flange nozzles
- Fine (1-¼" / 32mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 2" / 50mm Contractor thread nozzles. This is a BlastOne Exclusive!
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- Available configurations:
-
BAHNGN5
- Suits the Nozzle Pressure Test Kit
- Size: 18G x 1-½”
- Comes in 5 pack
BAHNGN5- Suits the Nozzle Pressure Test Kit
- Size: 18G x 1-½”
- Comes in 5 pack
-
- Suits AHR general purpose air hose
- Two piece fitting, hose tail to swivel nut female thread
- Various clamping options - double bolt clamp or bandit clamp
- Sold individually
-
BA700751903
- O-Ring Seal for 10” Schmidt blast pot closure 7mm section
- Used to create a complete seal on the top of the megablaster
- Recommend you replace seal at first sign of wear
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
BA700751903- O-Ring Seal for 10” Schmidt blast pot closure 7mm section
- Used to create a complete seal on the top of the megablaster
- Recommend you replace seal at first sign of wear
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
-
HLNV3730
- Padding Connectors (Pair) (NV3-730)
- Padding connectors attach to the inside of the helmet to hold the side pads which encase the blasters ears
- Suits RPB Nova3 Blast Helmet
- Sold as a complete kit including a left and right connector and an allen key
HLNV3730- Padding Connectors (Pair) (NV3-730)
- Padding connectors attach to the inside of the helmet to hold the side pads which encase the blasters ears
- Suits RPB Nova3 Blast Helmet
- Sold as a complete kit including a left and right connector and an allen key
-
DM222900007
- Suits Pneumatic Control Valve DM2229000
- Replacement Large O-Ring to ensure the piston seal is good
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
DM222900007- Suits Pneumatic Control Valve DM2229000
- Replacement Large O-Ring to ensure the piston seal is good
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
-
DM222900099
- Suits Pneumatic Blast Pot Control Valve DM2229000
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings
DM222900099- Suits Pneumatic Blast Pot Control Valve DM2229000
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings