Deadman Parts / Control Systems
Showing 1–15 of 94 results
-
- Clemco TLR-50 / TLR-300 Deadman Controls are the primary safety system for Clemco Classic Series pneumatic blast machines
- Ensure automatic deactivation if the operator loses control of the blast nozzle.
- The system can be configured in various ways, depending on the blast machine, what media is being used, and what features are needed.
- The Clemco control systems in this section are complete systems. Complete systems are necessary only when completely refurbishing a pot.
- Individual valves and other repair components are available separately.
-
The TLR control systems for pneumatic, pressure-release Clemco blast machines, utilize separate inlet and outlet valves along with other components. Genuine OEM Clemco replacement valves are shown here.
-
Deadman hose - aka ‘twin line’ - transfers the signal air to the valves in pneumatic control systems. This yellow 3/16" x 3/16" twinline rubber hose is OEM Clemco and is available in pre-fitted multiple lengths options (01943 fittings on both ends). Custom lengths are also available. Note: While multiple twinline sections can be joined using (01944) hose joiners, best safety practices suggest a maximum length of 100'. When longer lengths are required, the faster-acting electric control systems are safer.
-
AFAL05537Maintain safe operation of pneumatic deadman systems during cold temperatures with this antifreeze injector kit. Designed for all Clemco pneumatic control systems, this injector assembly can prevent the deadman from dangerous icing. MPN: 05537AFAL05537Maintain safe operation of pneumatic deadman systems during cold temperatures with this antifreeze injector kit. Designed for all Clemco pneumatic control systems, this injector assembly can prevent the deadman from dangerous icing. MPN: 05537
-
The SmartSPARKTM Short Proof Deadman Control System is enhancing blaster safety in all blast operations. Designed to address inadvertent activations caused by electrical shorts in deadman control lines, the SmartSPARK Deadman System keeps your blasters safe. The SmartSPARK Deadman and Controls has a closed loop system, that will detect an electrical short in the deadman line and shut off the blast pot instantly.
- Designed to quickly retrofit onto existing Schmidt blast pots with electrical deadman controls
- Reduces the likelihood of accidental start-ups by detecting and responding to electrical shorts
- 2 models avaliable - single outlet and 4-operator outlet.
- Ideal for blastrooms that have steel grating and blast sites where multiple operators are working simultaneously.
-
DMBB450000043
BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement o-ring for the BAABS blast light. MPN: 4500-000-43
DMBB450000043BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement o-ring for the BAABS blast light. MPN: 4500-000-43
-
DM227000001P-When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the upper portion of the base grip handle, including the top rail piece. MPN: 2270-000-01P (updated version)DM227000001P-When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the upper portion of the base grip handle, including the top rail piece. MPN: 2270-000-01P (updated version)
-
DM460000003BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement latch assembly for the new Compact version of the BAABS deadman system. MPN: 4600-000-03DM460000003BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement latch assembly for the new Compact version of the BAABS deadman system. MPN: 4600-000-03
-
DMBB450000027
While Schmidt developed this tough blast nozzle light as an accessory for their proprietary BAABS deadman system, it can be used with ANY 12v control system. It attaches easily to any BAABS rail base, although when using on the sub-compact version the thrust brace would need to be removed. With over 830 lumens, this LED low-voltage (12/24v) blast light is economical, field serviceable, and lightweight. The ingenious tear-off lens is produced in a tabbed stack of 5 and replacement stacks are readily available (see You May Also Like below)
DMBB450000027While Schmidt developed this tough blast nozzle light as an accessory for their proprietary BAABS deadman system, it can be used with ANY 12v control system. It attaches easily to any BAABS rail base, although when using on the sub-compact version the thrust brace would need to be removed. With over 830 lumens, this LED low-voltage (12/24v) blast light is economical, field serviceable, and lightweight. The ingenious tear-off lens is produced in a tabbed stack of 5 and replacement stacks are readily available (see You May Also Like below)
-
DMBB450000037
BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This Tear-Off 5-Lens tabbed set for the BAABS Blast Light is an ingenious way to both protect the outer lens AND maintain visibility while blasting. MPN: 4500-000-37
DMBB450000037BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This Tear-Off 5-Lens tabbed set for the BAABS Blast Light is an ingenious way to both protect the outer lens AND maintain visibility while blasting. MPN: 4500-000-37
-
DMBB450000029
BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement housing for the BAABS blast light. MPN: 4500-000-29
DMBB450000029BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement housing for the BAABS blast light. MPN: 4500-000-29
-
DMBB450000030
BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the outer lens cover, a replacement part available for the BAABS blast light. MPN: 4500-000-30
DMBB450000030BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the outer lens cover, a replacement part available for the BAABS blast light. MPN: 4500-000-30
-
DMBB450000036
BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement lens for the BAABS Blast light. MPN: 4500-000-36
DMBB450000036BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement lens for the BAABS Blast light. MPN: 4500-000-36
-
DMBB450000044BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement adapter assembly used to connect the BAABS blast light to the BAABS rail. MPN: 4500-000-44DMBB450000044BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement adapter assembly used to connect the BAABS blast light to the BAABS rail. MPN: 4500-000-44
-
DMECK3999
- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.