My Account
Heavy Duty Sand & Abrasive Blast Nozzles
ABRASIVE MEDIA SANDBLASTING NOZZLES
BlastOne is a leading supplier of sandblast nozzles to industrial blast and paint companies worldwide. Our team is able to recommend the best type for your application whether you seek long lasting sini silicon nitride nozzles with a tough polyurethane jacket, tungsten carbide lasting 100-250 hours, standard silicon carbide or even alumina.
We also offer our blast nozzles in either contractor, medium, or fine threaded options. Whether you’re interested in trying a new type or simply replace an old favorite, give BlastOne a call and let us ship one out today.
Showing 11–15 of 27 results
-
- 2" UNC (50mm) coarse Contractor thread 'C' or 1 1/4" NPSM (32mm) Fine Industrial thread 'F'
- Square thorat entry, venturi
- Tungsten carbide liner
- Urethane jacket, brass thread
- Large square blast pattern - less overlap when blasting
- Alignment ridges on jacket
Part Number Nozzle Size Product Type Purchase Price BNSQS6C #6 - 3/8" Coarse 2" Contractor Thread $366.00
Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$366.00
Unavailable
-
- 2" UNC (50mm) coarse contractor thread 'C'
- 1 1/4" (32mm) wide throat entry, long venturi
- Gives a wide, even blast pattern
- Ideal for sweep blasting
- Also available in tungsten carbide
- 2" UNC (50mm) coarse contractor thread 'C'
- 1 1/4" (32mm) wide throat entry, long venturi
- Gives a wide, even blast pattern
- Ideal for sweep blasting
- Also available in tungsten carbide
-
- Ideal for blasting recesses, pipe internals, behind angles, etc.
- 2" UNC (50mm) coarse Contractor thread 'C' or 1 1/4" NPSM (32mm) Fine Industrial thread 'F'
- 3/4" (20mm) throat entry
- 45° single or triple (equi-spaced) side outlets
- Tungsten carbide liner
- **Triple orifice nozzles have triple air & abrasive consumption!
Part Number Nozzle Size Product Type Purchase Price BNAAM5x1C #5 - 5/16" Coarse 2" Contractor Thread $294.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$294.00
In Stock
-
- 4 Outlets
- 60°/120° Angles
- 5/16" orifice
- Tungsten Carbide Nozzle
- 1-1/4" Fine Thread
- Sold Individually
- Made in USA
- 4 Outlets
- 60°/120° Angles
- 5/16" orifice
- Tungsten Carbide Nozzle
- 1-1/4" Fine Thread
- Sold Individually
- Made in USA
Part Number Purchase Price BNAAM6X4F60120 $311.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$311.00
Unavailable
-
- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
A TIP ON WHEN TO REPLACE YOUR SAND BLAST NOZZLE
Even a very small increase in blasting nozzle size will result in a very large increase in ‘air and abrasive consumption’. When a sand blast nozzle has worn 1/16” (2mm) larger, it is time to be replaced. Use an abrasive blast nozzle size analyzer kit to check your nozzle regularly (we recommend at least ONCE PER WEEK). You’ll be surprised how much your production decreases with a worn sand blasting nozzle! Wet blasting & WIN (Water Induction Nozzles) also available
SANDBLASTING NOZZLES & ABRASIVE BLAST NOZZLES
NOTE: Efficiency drops 1.5% for every 1 psi below 100 at the sand blasting nozzle. This means a 14% efficiency drop at 90 psi, 26% efficiency lost at 80 psi and almost half lost at 60 psi. Efficiency goes up as pressure increases. 120 psi improves performance by 30%. Actual efficiency increase/ decrease will vary depending on abrasive type and size, blast nozzle type, size and wear, hose sizes and wear, temperature, moisture content of compressed air, etc. Use a abrasive wet or dry blast nozzle pressure gauge to measure air pressure at the nozzle. Make allowance for increased air consumption due to sandblast nozzle wear, air leaks, breathing airline filter, respirator breathing air and any pneumatic equipment using air from the compressor. A good rule of thumb is to use a compressor twice the capacity of the grit blast nozzle consumption.