Blasting
Showing 136–150 of 945 results
-
IPC1013
- IPC1013, RB-10-1 Replacement Dust Seal
- Dust seals are the main wear item in the RotorBlast
- For IPC1000 RotorBlast
- Note: 30 of these leather seals are included in the IPC1099 RotorBlast repair kit
- Note: for a longer life option, a teflon version is also available - see part IPC1013A
IPC1013- IPC1013, RB-10-1 Replacement Dust Seal
- Dust seals are the main wear item in the RotorBlast
- For IPC1000 RotorBlast
- Note: 30 of these leather seals are included in the IPC1099 RotorBlast repair kit
- Note: for a longer life option, a teflon version is also available - see part IPC1013A
-
IPC1013A
- IPC1013A, RB-10-2 Replacement Dust Seal
- Dust Seals are the main wear item in the RotorBlast - this is an optional longer-life version than the standard leather type
- For IPC1000 RotorBlast
IPC1013A- IPC1013A, RB-10-2 Replacement Dust Seal
- Dust Seals are the main wear item in the RotorBlast - this is an optional longer-life version than the standard leather type
- For IPC1000 RotorBlast
-
GV2410321L
- Extended-length version of replacement half-nipple for Tri-Clover
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Note: This extended-length version is recommended when the tri-clover is used by itself (without the union-end ball valve)
GV2410321L- Extended-length version of replacement half-nipple for Tri-Clover
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Note: This extended-length version is recommended when the tri-clover is used by itself (without the union-end ball valve)
-
IPC1011
- IPC1011, RB-7 Replacement Tube Lock Ring
- For IPC1000 RotorBlast
- Note: 2 of these are also included in Spare Parts Kit, IPC1099
IPC1011- IPC1011, RB-7 Replacement Tube Lock Ring
- For IPC1000 RotorBlast
- Note: 2 of these are also included in Spare Parts Kit, IPC1099
-
IPC1014
- IPC1014, RB-12 Replacement Tungsten Carbide Washer
- For IPC1000 RotorBlast
- Note: 2 of these items are also included in Spare Parts Kit, IPC1099
- Caution: Tungsten Carbide is brittle - handle with care!
IPC1014- IPC1014, RB-12 Replacement Tungsten Carbide Washer
- For IPC1000 RotorBlast
- Note: 2 of these items are also included in Spare Parts Kit, IPC1099
- Caution: Tungsten Carbide is brittle - handle with care!
-
GV2410320SP
- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
GV2410320SP- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
-
IPC4005Replacement part for Coneblast.
Note - this is 1 of 2 required - see IPC4004 for the other one.IPC4005Replacement part for Coneblast.
Note - this is 1 of 2 required - see IPC4004 for the other one. -
IPC4003Replacement parts for ConeBlast Internal Pipe Blaster.
Includes Throat Rod as shown.
NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C.IPC4003Replacement parts for ConeBlast Internal Pipe Blaster.
Includes Throat Rod as shown.
NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C. -
IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster.
Includes throat rod as shown.
NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003.IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster.
Includes throat rod as shown.
NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003. -
IPC4004Replacement part for ConeBlast
Note: This is one of two that are required - see IPC4005 for the other one.IPC4004Replacement part for ConeBlast
Note: This is one of two that are required - see IPC4005 for the other one. -
FREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Day Manufacturer Warranty
- Versatile! No need to have separate wet and dry blast equipment. Wet blast or dry blast with a single unit
- Minimal water usage (less than 1 pint / ½ litre per minute) with proprietary Schmidt M.I.S.T.™ technology that allows precise control of the amount of water injected into the air stream while blasting
- Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
- Schmidt TeraValve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
- Wide range of blasting pressure capabilities from 10 to 150 psi
- Toggle between wet blast, dry blast, wash-down and blow-off using a single control panel
- This version has a 3.5 C.F. capacity. Other sizes are available upon request - enquire.
Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
CHE132C
- Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
- Typically used as part of the surface preparation process prior to application of coatings.
- Apply using a pressure washer before you blast.
- Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
- Sold in 5-gallon drums
- Genuine products - manufactured by Chlor-Rid
CHE132C- Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
- Typically used as part of the surface preparation process prior to application of coatings.
- Apply using a pressure washer before you blast.
- Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
- Sold in 5-gallon drums
- Genuine products - manufactured by Chlor-Rid