Blasting
Showing 151–165 of 938 results
-
This glove delivers superior chemical resistance (including to MEK) and offers good dexterity and comfort. It has the following specifications:
- Thinnest butyl glove we offer, delivering enhanced comfort
- ANSI 3 Abrasion Resistance rating
- Latex free
- Roughened hand-surface for improved gripping power
- Effective protection against highly aggressive chemicals, including aldehydes, ketones, and esters. See Documents tab for specific chemical protection chart.
-
HTDCG412M2
- Highest level of durability and low vibration with steel cut spiral bevel gears
- Increases user productivity
- Offers greater comfort and control with two position side handle
- Enhanced application versatility with keyless guard
- Improved gear durability with low profile jam pot
- Quick and easy wheel removal with quick change wheel release
HTDCG412M2- Highest level of durability and low vibration with steel cut spiral bevel gears
- Increases user productivity
- Offers greater comfort and control with two position side handle
- Enhanced application versatility with keyless guard
- Improved gear durability with low profile jam pot
- Quick and easy wheel removal with quick change wheel release
-
HTPGA5
- Helical bevel gear design
- 5" wheel capacity
- 0.8 HP governed motor
- Ergonomic side handle
- Keyless adjustable protective guard
- Manufacturer part #CP9121BR
HTPGA5- Helical bevel gear design
- 5" wheel capacity
- 0.8 HP governed motor
- Ergonomic side handle
- Keyless adjustable protective guard
- Manufacturer part #CP9121BR
-
HTEJC32AIndustrial Electric Needle Scaler has the following specifications:
- 115v / 300w / 2.8 amps
- Standard needles with machine are 15 pieces of 3mm x 7 inches
- Optional needles are 32 pieces of 2mm x 7 inches
- Standard needles are carbon steel. Optional non-sparking beryllium/copper or stainless steel needles are available.
- Adjustable front handle for operator convenience
- includes 6mm Allen wrench
HTEJC32AIndustrial Electric Needle Scaler has the following specifications:- 115v / 300w / 2.8 amps
- Standard needles with machine are 15 pieces of 3mm x 7 inches
- Optional needles are 32 pieces of 2mm x 7 inches
- Standard needles are carbon steel. Optional non-sparking beryllium/copper or stainless steel needles are available.
- Adjustable front handle for operator convenience
- includes 6mm Allen wrench
-
- DO NOT use for breathing air
- Industrial interchange fittings are 300 psi rated
- Brass or plated steel bodies with brass or steel valves
- Most commonly used in the USA
-
AVAILABLE FOR RENTAL OR PURCHASE
- #1 Deadman in the industry
- Larger internal ports make it faster acting, making it a safer handle
- Compact, slimline design - 30% easier then other handles to hold down
- Simple to make in-field repairs as required
- Available as Electric or Pneumatic
- Geniune Products - Manufactured by Schmidt / Axxiom Manufacturing
-
DMRGNE2000PC
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
DMRGNE2000PC- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
-
DMRGN1000
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
DMRGN1000- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
-
DMRCC100
- Conventional, bleeder-style handle – do not use with Combo or Thompson valves
- RCC Aluminum "Bleeder" pneumatic remote control handle
- Large-lever design
- ¼" (6 mm) (supply) x ⅛" (3 mm) (return) threaded connectors
- Recommended upgrade to a non-breather deadman handle
- Genuine Parts - Manufactured by Clemco
DMRCC100- Conventional, bleeder-style handle – do not use with Combo or Thompson valves
- RCC Aluminum "Bleeder" pneumatic remote control handle
- Large-lever design
- ¼" (6 mm) (supply) x ⅛" (3 mm) (return) threaded connectors
- Recommended upgrade to a non-breather deadman handle
- Genuine Parts - Manufactured by Clemco
-
DMRGNE2000
- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included
DMRGNE2000- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included
-
DMRMCATCK
BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
-
- AirSpray Conventional Pressure Pot, used most commonly for spraying thin coatings
- 2.8 Gallon capacity, allows you to mix up a standard 2 gallon kit of paint with ease
- Single or Dual Regulators availabe
- Agitators - if you are spraying coatings like zinc where it will settle out, you need an agitator kit
- Sold Individually
- Genuine Parts - Manufactured by Binks / Carlisle Fluid Technologies
-
BLASTHOSE
- High quality, long lasting sandblasting hose
- Blast Hoses have a thick, anti-static, natural rubber liner
- Made to BlastOne Blast Hose specification
- Rated to minimum 175 psi - 3:1 safety factor
- Robust TuffRap™ outer blasting hose cover
- Heavy Wall Blast Hose
- Recommended for use as an extension hose
- Fit with your choice of couplings
- Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.
-
- Superior quality, lightweight and highly flexible sandblasting hose
- Blast Hoses have anti-static, natural rubber liner
- Rated to minimum 175 psi - 3:1 safety factor
- Robust TuffRap outer blasting hose cover
- Commonly known as whip hose, supa hose or supahose
- Fit with your choice of nozzle holder and couplings
- Please Request Rental Pricing