My Account
Blasting
Showing 76–90 of 940 results
-
DMRMCATCSGBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement gasket for 1" abrasive trap (factory part number 02434).
DMRMCATCSGBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement gasket for 1" abrasive trap (factory part number 02434).
Part Number Purchase Price DMRMCATCSG $5.67 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$5.67
-
-
Junction Box assemblies include the deadman controls for Bulk pots, and are required when retrofitting an old pot with new valves. Available in 2 and 4 outlet configurations.
-
INDHHDCEXTROD
- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
INDHHDCEXTROD- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
Part Number Purchase Price INDHHDCEXTROD $166.67 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$166.67
-
-
INDLPDEXT
BlastOne offers all parts and accessories for DeFelsko testing instruments.
This extension rod accessory extends the reach of the PosiTest® Low Voltage Pinhole Detector by 12" (305mm). Multiple extensions can be connected together to further extend the reach.
MPN: LPDEXTROD
INDLPDEXTBlastOne offers all parts and accessories for DeFelsko testing instruments.
This extension rod accessory extends the reach of the PosiTest® Low Voltage Pinhole Detector by 12" (305mm). Multiple extensions can be connected together to further extend the reach.
MPN: LPDEXTROD
-
Upgrade old technology Bulk pots from donut valves & pinch valves to state-of-the-art TeraValve systems using a retrofit kit. Available in 2 or 4 outlet configurations.
The CEN Mega Exhaust Muffler retrofit kit is a common option that can be conveniently added when performing this retrofit.
Note: matching Junction Box is available separately. Retrofitting is recommended only for mega blasters with good structural integrity.
These are the parts kits only. BlastOne can perform the retrofit if desired - contact us for pricing and details.
-
INDDTROLLER
Optional spring-loaded Dust Tape Roller, used to apply recommended constant force.
INDDTROLLEROptional spring-loaded Dust Tape Roller, used to apply recommended constant force.
Part Number Purchase Price INDDTROLLER $325.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$325.00
-
-
INDLPDACCPK
BlastOne offers all DeFelsko testing instruments, accessories, and supplies.
This pack includes adaptable sponge hardware and accessories to convert the Basic Kit to the Complete Kit. It includes the following:
- Adaptable Sponge Hardware
- Roller
- Internal Diameter
- 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additional 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- Magnetic Grounding Post
- Hard Shell Carrying Case
MPN: LPDACCPK
INDLPDACCPKBlastOne offers all DeFelsko testing instruments, accessories, and supplies.
This pack includes adaptable sponge hardware and accessories to convert the Basic Kit to the Complete Kit. It includes the following:
- Adaptable Sponge Hardware
- Roller
- Internal Diameter
- 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additional 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- Magnetic Grounding Post
- Hard Shell Carrying Case
MPN: LPDACCPK
Part Number Purchase Price INDLPDACCPK $750.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$750.00
-
- Adaptable Sponge Hardware
-
INDLPDCBLDWAND
BlastOne carries all DeFelsko instruments, supplies, & accessories.
This accessory converts the PosiTest LPD low-voltage pinhole detector into a cabled wand style unit and is compatible with the rectangular and roller sponge hardware (not included).
The unit comes complete with the remote wand handle and a 5' (1.5m) hot-wire cable.
INDLPDCBLDWANDBlastOne carries all DeFelsko instruments, supplies, & accessories.
This accessory converts the PosiTest LPD low-voltage pinhole detector into a cabled wand style unit and is compatible with the rectangular and roller sponge hardware (not included).
The unit comes complete with the remote wand handle and a 5' (1.5m) hot-wire cable.
Part Number Purchase Price INDLPDCBLDWAND $60.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$60.00
-
-
INDDTREPORT
Use with the PosiTest® DT. Includes the following:
- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
INDDTREPORTUse with the PosiTest® DT. Includes the following:
- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
Part Number Purchase Price INDDTREPORT $33.33 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$33.33
-
-
BlastOne offers all DeFelsko testing equipment, accessories, and supplies.
Pinhole detectors (aka Spark Testers) such as this PosiTest® LPD, detect holidays, pinholes, and other discontinuities on metal and concrete substrates.
The DeFelsko LPD Low Voltage series is designed for coating thickness up to 20 mils. Some of the features include:
- GroundSense™, to visually confirm instrument is properly grounded
- 4 voltage operation ranges
- Weatherproof, dustproof, and shockproof
- Long Form Certificate of Calibration included
2 stick kit versions available as follows:
- PosiTest LPD Basic Kit
- Base Tube
- 3 AAA Batteries
- Rectangle Sponge Hardware
- Rectangle Sponge
- 15' (4.5 m) Ground Wire
- Insulating Collar
- Ear Bud
- Wrist Strap
- Carabiner
- Hard Shell Case
- PosiTest LPD Complete Kit
- Includes all contents of Basic Kit, plus:
- Adaptable Sponge Hardware
- Rectangle (Flat)
- Roller
- Internal Diameter
- Additional 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additonal 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- 15' (4.5 m) Hot Wire
- Magnetic Grounding Post
- Adaptable Sponge Hardware
- Includes all contents of Basic Kit, plus:
Note: We also carry Defelsko HHD High voltage holiday detectors for work on thicker coatings from 8 mils and up.
-
- Hold*Blast is a cost-effective flash rust prevention solution
- Environmentally safe and compatible with all coatings
- It is used to "Hold the Blast" to allow primer to be applied
- Added in low concentration (2-10%) to the 'blast water' to prevent flash rusting
- Ideal to mix with your water when wet blasting
- Compare to Hold*Tite 102!
- 32 pails ship on 1 pallet
-
- The safest deadman on the market - mechanically prevents inadvertent activation
- Redundant spring-loaded safety latch assures base stays wrapped around blast hose
- The BAABS system is built around the G3 Trigger Deadman handle
- Modular configurations
- Unrivaled comfort - ergonomic grip design allows for increased control
- Thrust pad and side grip can be quickly configured for left- or right-handed operation
- Handles and grips can be adjusted to accommodate varying arm lengths
- Can be easily retrofitted over most blast hoses
- Genuine Schmidt® part manufactured in the USA
-
FREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Day Manufacturer Warranty
- Compact contractor size, highly portable with good productivity for smaller projects
- When using premium garnet media, this pot will last for up to 1 hour before you need to refill
- Capacity of 3.5 cu ft, which equates to about 500 pounds of dense media like premium GMA garnet
- Pressure Rating: 150psi
Sold as a Kit which Includes:
- Blast Pot
- Deadman Control System with 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in order comments field.
Genuine Products - Manufactured by Schmidt® /Axxiom Manufacturing
-
BMS1001TV
FREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Manufacturer Warranty
- 10 cu ft Schmidt® Blast pot
- Excellent for a blastroom application with 1-2 blasters
- Single outlet Thompson® Valve II abrasive metering valve, Dual available
- Abrasive capacity
- Garnet 1500 lbs
- Steel Grit 2450 lbs
- Comes with pneumatic deadman handle and 55ft of control hose, Electric available
Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing to BlastOne specifications
BMS1001TVFREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Manufacturer Warranty
- 10 cu ft Schmidt® Blast pot
- Excellent for a blastroom application with 1-2 blasters
- Single outlet Thompson® Valve II abrasive metering valve, Dual available
- Abrasive capacity
- Garnet 1500 lbs
- Steel Grit 2450 lbs
- Comes with pneumatic deadman handle and 55ft of control hose, Electric available
Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing to BlastOne specifications
Part Number Purchase Price BMS1001TV Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
BMS1102TERA
FREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Day Manufacturer Warranty
- Unique! Dual Outlet for 2 operators, in a short configuration for easy loading.
- Only 46 inches tall! Shorter than a standard 6.5 pot.
- Capacity of 11 cu ft, which equates to 1600lbs of a dense media like premium GMA Garnet
- Pressure Rating: 150psi
- TeraValve pressure-hold metering valves
Sold as a Kit which Includes:
- Blast Pot
- Pneumatic Deadman Control System comes with 2 sets of 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field.
BLAST HOSE sold separately
Genuine Product - Manufactured by Schmidt® /Axxiom Manufacturing
BMS1102TERAFREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Day Manufacturer Warranty
- Unique! Dual Outlet for 2 operators, in a short configuration for easy loading.
- Only 46 inches tall! Shorter than a standard 6.5 pot.
- Capacity of 11 cu ft, which equates to 1600lbs of a dense media like premium GMA Garnet
- Pressure Rating: 150psi
- TeraValve pressure-hold metering valves
Sold as a Kit which Includes:
- Blast Pot
- Pneumatic Deadman Control System comes with 2 sets of 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field.
BLAST HOSE sold separately
Genuine Product - Manufactured by Schmidt® /Axxiom Manufacturing
Part Number Purchase Price BMS1102TERA $18,970.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$18,970.00
-
