Wet Abrasive Blasters
Showing all 5 results
-
FOR RENTAL OR PURCHASE
- MistBlaster / Mist Blaster™
- Versatile capability - Dustless Vapor or Dry, Washdown and Blowdown
- Will work with any abrasive
- Pot capacity 6.5 cu ft
- Blast pressure ranging from 75-150 psi
- Single Outlet with Tera Valve XL metering valve
- Has secondary wheels to ease transportation
-
- Wet blast or dry blast with a single unit
- Minimal water usage (less than 1 pint / ½ litre per minute) with proprietary Schmidt M.I.S.T.™ technology that allows precise control of the amount of water injected into the air stream while blasting
- Set and forget switching between machine modes
- Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
- Industry-leading productivity and reliability from Schmidt abrasive blasting technology
- Schmidt TeraValve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
- Wide range of blasting pressure capabilities from 10 to 150 psi
- Toggle between wet blast, dry blast, and blow-off using a single control panel
- Increased portability
-
FOR RENTAL OR PURCHASE The Schmidt Bulk AmphiBlast™ combines the features of a MegaBlaster and dustless vapour abrasive blasting, and is the latest in technology and efficiency. The Bulk AmphiBlast™ has a super large capacity that allows 2-4 blasters to blast for 8 hours each without stopping to refill the blast pot and each blaster can choose independently if they want to dry blast, mist blast, SoftwashTM or blow down.FOR RENTAL OR PURCHASE The Schmidt Bulk AmphiBlast™ combines the features of a MegaBlaster and dustless vapour abrasive blasting, and is the latest in technology and efficiency. The Bulk AmphiBlast™ has a super large capacity that allows 2-4 blasters to blast for 8 hours each without stopping to refill the blast pot and each blaster can choose independently if they want to dry blast, mist blast, SoftwashTM or blow down.
-
FOR RENTAL OR PURCHASE
- Combination Skid - MistBlaster and AirDryer Package
- Capable of doing wet and dry blasting - ultimate flexibility for any job!
- 6.5 cu. ft. Schmidt Blast Pot with MistBlaster Conversion
- Teravalve XL Abrasive Metering Valve
- 400cfm Moisture Removal System (Select Deliquescent Air Dryer or Squat AfterCooler)
- 50 gallon water tank & pump
- Select if you do or don't want the Operator Accessories Kit (RPB Breathing air filter and GX4 CO Monitor, 2" Bull hose, 1 1/4" SupaFlex Blast Hose, Nova 3 Blast Helmet, and #6 Blast Nozzle)
-
- 2.0 cuft / 57 litre blast pot capacity
- Uses 1 liter/min of water - water goes in the pot with the abrasive
- Maximum pressure 150psi
- Blast Pot comes with
- 20 metres of 1" blast hose
- A 5/16" vapor blast nozzle
- Pneumatic deadman control handle and 20 metres of twinline
- 2.0 cuft / 57 litre blast pot capacity
- Uses 1 liter/min of water - water goes in the pot with the abrasive
- Maximum pressure 150psi
- Blast Pot comes with
- 20 metres of 1" blast hose
- A 5/16" vapor blast nozzle
- Pneumatic deadman control handle and 20 metres of twinline