Surface Contamination
Showing 1–15 of 20 results
-
The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards. The DeFelsko SST test probe is an easy and accurate way to conduct these tests. Test patches are required to perform them and DeFelsko has multiple options, as follows:
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
- Rigid ring. Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
- Flexible ring. Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
- Saves time and money vs. disposable patches.
- Utilizes a plastic needle - no sharp hypodermic needles required!
- Latex Disposable. The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
- Latex-Free Disposable. Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
-
INDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units. MPN: SSTSWABINDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units. MPN: SSTSWAB
-
INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3
-
INDSSTNEEDLEBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.INDSSTNEEDLEBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.
-
INDSSTDISPTIPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units. MPN: SSTDISPTIPINDSSTDISPTIPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units. MPN: SSTDISPTIP
-
INDDTROLLEROptional spring-loaded Dust Tape Roller, used to apply recommended constant force.INDDTROLLEROptional spring-loaded Dust Tape Roller, used to apply recommended constant force.
-
INDDTREPORTUse with the PosiTest® DT. Includes the following:
- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
INDDTREPORTUse with the PosiTest® DT. Includes the following:- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
-
INE134CSN
- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
INE134CSN- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
-
INE142K
- Dust Tape Test Kit to measure surface dust
- Used in accordance with Standards ISO 8502-3
- Comes with a Sturdy Binder to hold all forms, visual comparator, tape, scissors, and illuminated magnifier
- 10X Illuminated Magnifier
INE142K- Dust Tape Test Kit to measure surface dust
- Used in accordance with Standards ISO 8502-3
- Comes with a Sturdy Binder to hold all forms, visual comparator, tape, scissors, and illuminated magnifier
- 10X Illuminated Magnifier
-
INE134RKIT50
- Refill kit for CSN Test Kit
- Used to measure surface contamination from Chlorides, Sulphates and Nitrates
- Comes in a Box of 50 Tests
- Shelf life: 18-24 months
- Genuine Parts - Manufactured by ChlorRid
INE134RKIT50- Refill kit for CSN Test Kit
- Used to measure surface contamination from Chlorides, Sulphates and Nitrates
- Comes in a Box of 50 Tests
- Shelf life: 18-24 months
- Genuine Parts - Manufactured by ChlorRid
-
- Purified, ion-free water to be used with the PosiTector SST
- Available in 250ml or 1L bottles
- Manufacturer part#'s SSTDIWATER / SSTDIWATER1L
-
INDSSTABRKITThe DeFelsko® PosiTector® SST Abrasives Test Kit measures soluble salts in blast cleaning abrasives. Designed for compliance with ASTM D4940 and ISO 11127-6, this portable kit includes everything needed to accurately assess contamination levels: two glass beakers, one plastic beaker, a plastic funnel, paper filters, 1L deionized water, 60ml certified conductivity standard, and a stainless mixing rod, all encased in a durable plastic case. Ensure the purity of your abrasives and the quality of your surface preparation with ease.
- Designed for ASTM D4940 and ISO 11127-6 compliance.
- Portable kit includes glass and plastic beakers, funnel, filters, deionized water, conductivity standard, and mixing rod.
- Enables accurate measurement of soluble salt contamination in abrasives.
- Includes certified conductivity standard for meter accuracy verification.
- All components neatly organized in a hard plastic case for field or lab use.
INDSSTABRKITThe DeFelsko® PosiTector® SST Abrasives Test Kit measures soluble salts in blast cleaning abrasives. Designed for compliance with ASTM D4940 and ISO 11127-6, this portable kit includes everything needed to accurately assess contamination levels: two glass beakers, one plastic beaker, a plastic funnel, paper filters, 1L deionized water, 60ml certified conductivity standard, and a stainless mixing rod, all encased in a durable plastic case. Ensure the purity of your abrasives and the quality of your surface preparation with ease.- Designed for ASTM D4940 and ISO 11127-6 compliance.
- Portable kit includes glass and plastic beakers, funnel, filters, deionized water, conductivity standard, and mixing rod.
- Enables accurate measurement of soluble salt contamination in abrasives.
- Includes certified conductivity standard for meter accuracy verification.
- All components neatly organized in a hard plastic case for field or lab use.
-
INE130SC1
- For analysis of chloride ions, ferrous ions and pH level
- Chloride Ion Detection Threshold: approx 40 ppm
- Ferrous Ion Detection Threshold: approx 3 ppm
- pH measurement range: 4 to 9 verified by color scale
- Complete kit supplied with graduated cylinder, beakers, tweezers, water demineralizer cartridge, cotton balls, chloride ion titration strips, ferrous ion titration strips, ruler, instructions and hard cover carry-case
- Surface Contamination Analysis Test (SCAT) Kit
- 'Swab method' used in accordance with AS1627-1, AS3894-6 Standard
INE130SC1- For analysis of chloride ions, ferrous ions and pH level
- Chloride Ion Detection Threshold: approx 40 ppm
- Ferrous Ion Detection Threshold: approx 3 ppm
- pH measurement range: 4 to 9 verified by color scale
- Complete kit supplied with graduated cylinder, beakers, tweezers, water demineralizer cartridge, cotton balls, chloride ion titration strips, ferrous ion titration strips, ruler, instructions and hard cover carry-case
- Surface Contamination Analysis Test (SCAT) Kit
- 'Swab method' used in accordance with AS1627-1, AS3894-6 Standard
-
INE1342
- Supplied in a pack of 4 test kits
- Abrasive Chloride measurement range 1 ppm to 50 ppm
- Compact, portable, two minute field test
- Safe handling - no needles or syringes
INE1342- Supplied in a pack of 4 test kits
- Abrasive Chloride measurement range 1 ppm to 50 ppm
- Compact, portable, two minute field test
- Safe handling - no needles or syringes