Instruments
Showing 1–15 of 122 results
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
The PosiTector CMM IS concrete moisture meter platform is expandable, and larger concrete areas can be tested simultaneously in accord with ASTM F2170 standards by increasing the number of in-situ probes. CMM IS Expansion Packs (additional probes) are available singly or in packs of 4 or 16 and each probe includes the following accessories:
- Calibration Check chamber
- Saturated salt solution
- Cap / cover
- 2 stackable probe extensions
- Battery
-
The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards. The DeFelsko SST test probe is an easy and accurate way to conduct these tests. Test patches are required to perform them and DeFelsko has multiple options, as follows:
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
- Rigid ring. Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
- Flexible ring. Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
- Saves time and money vs. disposable patches.
- Utilizes a plastic needle - no sharp hypodermic needles required!
- Latex Disposable. The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
- Latex-Free Disposable. Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.
Note: Both disposable options from DeFelsko feature low-tack adhesive with TearGuard™ technology for easy patch removal. No residue to clean from the surface when using any DeFelsko SST test patch option!
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
-
The PosiTector® 6000 probe family - DeFelsko's solution for non-destructive coating thickness measurement on metallic* substrates. This is the most extensive range of instrument probes that DeFelsko offers - many versions available for many different applications. Further details as follows:
- Familiar. These interchangeable probes are compatible with the tried-and true DeFelsko Standard and Advanced Gauge Bodies. In addition, all current versions can also be paired with the PosiTector SmartLink / mobile app platform. (Compatibility chart available under the document tab to confirm compatibility on older gages.)
- Versatile. Checks coating thickness in many applications, including:
- Single-handed use (integral probes)
- Cabled probes in various lengths
- Hot / Rugged applications
- Very thin to very thick coatings
- and more!
-
INDCMM
The PosiTest CMM - DeFelsko's solution for accurate comparative concrete moisture measurements. Simple and powerful, it offers a convenient way to conform to ASTM F2659. Selected features as follows:
- Simple Design. Simply placing the DeFelsko CMM directly on a clean, concrete floor gives a quick moisture measurement. It is a non-destructive test and doesn't require holes to be drilled in the concrete slab or screed.
- Fast. The CMM gives instant readings.
- Robust. Sturdy IP65 construction offers weatherproof, dust proof, and water resistance. Shock resistant too!
- Easy to use. For large areas, the optional DeFelsko Telescopic Extender eliminates the need for kneeling to perform the tests.
- Capable. Tests concrete moisture to depths of ¾ or 1 inch. Integrates with PosiSoft software via USB cable for reporting.
Note: ASTM 2659 standardizes testing criteria for comparative moisture testing on concrete and cement floors. This instrument is not intended to test moisture levels deep within the slab, and is recommended to be used as a moisture comparator.
INDCMMThe PosiTest CMM - DeFelsko's solution for accurate comparative concrete moisture measurements. Simple and powerful, it offers a convenient way to conform to ASTM F2659. Selected features as follows:
- Simple Design. Simply placing the DeFelsko CMM directly on a clean, concrete floor gives a quick moisture measurement. It is a non-destructive test and doesn't require holes to be drilled in the concrete slab or screed.
- Fast. The CMM gives instant readings.
- Robust. Sturdy IP65 construction offers weatherproof, dust proof, and water resistance. Shock resistant too!
- Easy to use. For large areas, the optional DeFelsko Telescopic Extender eliminates the need for kneeling to perform the tests.
- Capable. Tests concrete moisture to depths of ¾ or 1 inch. Integrates with PosiSoft software via USB cable for reporting.
Note: ASTM 2659 standardizes testing criteria for comparative moisture testing on concrete and cement floors. This instrument is not intended to test moisture levels deep within the slab, and is recommended to be used as a moisture comparator.
-
INDSSTCUP
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10.
MPN: SSTCUP
INDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10.
MPN: SSTCUP
-
INDPOUCHDFT
BlastOne carries all DeFelsko instruments, accessories, and supplies.
This leather pouch has been specially designed for the PosiTest DFT gauge and economically provides protection for your investment.
MPN: POUCH-DFT
INDPOUCHDFTBlastOne carries all DeFelsko instruments, accessories, and supplies.
This leather pouch has been specially designed for the PosiTest DFT gauge and economically provides protection for your investment.
MPN: POUCH-DFT
-
The PosiTector® CMM IS - DeFelsko's solution for In Situ Concrete Moisture Metering conforming to ASTM F2170 testing standards. Innovative and simple to use, this PosiTector Concrete Moisture Meter offers the highest levels of testing accuracy, helping to prevent costly concrete coating failures. Selected features as follows:
- Simple Design. Individual In-Situ meters, inserted into holes drilled into concrete, connect wirelessly to the PosiTector App, or to a PosiTector Advanced Gage/DPM probe.
- Capable. The PosiTector CMMIS offers the most accurate moisture measurement in concrete as it detects moisture levels well below the floor surface.
- Configurable. With various expandable package options, the CMM IS platform can test on any size concrete floor, as follows:
- 3 probe Basic Kit, including caps, probe sleeve extensions, calibration check chambers and other accessories required for testing.
- 5 probe Complete Kit, including all the above plus a carrying case and a vacuum tool for cleaning out the drilled holes.
- 5 Probe Pro Kit, combines a PosiTector Advanced Gage/DPM probe with the above Complete Kit.
Among other requirements, ASTM F2170 requires 3 tests for the first 1000 square feet of floor area, and one additional test for each 1000 square feet. For larger floors, CMM IS Expansion Kits are available in various sizes.
-
The PosiTector® DPM - DeFelsko's solution for measurement of climatic conditions for industrial coating applications. Versatile and capable, these environmental measuring instruments have the following highlights:
- Familiar. Built on the tried-and-true PosiTector® gauge/body platform design with interchangeable probes.
- Capable. Measures and records environmental conditions including:
- Relative Humidity (RH)
- Air Temperature
- Surface Temperature
- Dew Point temperature
- Surface/Dew Point Delta
- Wind speed (one model only)
- Wet-Bulb (when used with Advanced Bodies only)
- Configurable. Available as probes-only (to use with an existing gage/body), or in packages with a new gage body, these DPM probes are available as:
- DPM Integral, with direct-contact surface thermometer
- DPMIR Integral, with infrared surface thermometer, for use on moving parts, very hot parts, etc., where direct contact is not possible.
- DPMS Integral, with cabled, magnetic surface temperature sensor for continuously logging surface temperatures. Also available for this model are 2 options:
- A liquid temperature probe, for measuring paint temperature prior to application
- A hand-held surface temperature probe, for spot-checking hard-to-reach areas.
- DPMA Integral, with all standard features plus a wind-speed indicator
- DPMD Cabled, with ½" NPT threads for insertion into pipe and other areas that can't be accessed by other versions.
Note: The PosiTector® DPM L is an autonomous version, and can be attached independently to steel for longer-term climatic condition recording.
-
The PosiTector GLS - DeFelsko's system for measuring glossiness, haze, and more. Working on many varied substrates, the DeFelsko GLS gloss meter is highly capable with the following highlights:
- Familiar. The GLS probe is built on the tried-and-true PosiTector gage/body platform as one of many interchangeable measurement probes.
- Capable. Three separate probe designs available for the following applications:
- 60° measurement angle, suitable for most gloss applications and the preferred angle for semi-gloss
- Combination 20°/60° measurement angles, suitable for high and semi-gloss applications w/haze indexing.
- Combination 20°/60°/85° measurement angles, suitable for matte, high-, and semi-gloss applications, also with haze indexing.
- Configurable. Available as follows:
- Probe only. Use with your existing PosiTector gauge.
- Standard PosiTector package with choice of probe.
- Advanced PosiTector package with choice of probe.
- Note: All PosiTector GLS packages come with case, integrated calibration standard, calibration certificate, and more.
Note: Learn more about the differences between the PosiTector Standard vs. Advanced Gage/Body on their separate web page.