My Account
Instruments
Showing 46–60 of 147 results
-
The PosiTest OTL - DeFelsko's solution to monitor and record temperature profiles in Powder Coating and other industrial ovens. Configurable in various ways, some of it's features include:- Simple Design. With an easy-to-use interface and bright LED's to indicate logger status, operating the Oven Temperature Logger is simple and intuitive.
- Capable. The DeFelsko OTL can:
- Measure & record up to 40,000 datasets in up to 6 batches. Records temperatures every 2 seconds for up to 22 hours.
- 6 ‘Channels’ (K-type thermocouple ports) for adding temperature probes.
- Configurable. Depending on the specific application, the OTL offers various configurations, such as:
- PosiTest OTLKIT, including logger with barrier box and standard Holder (65 minute endurance at 200° C)
- PosiTest OTLKITXT, same as above, except with heat-sink Holder (200 minute endurance at 200° C)
- (See sliding scale endurance chart on the brochure under the Documents tab)
- OTL logger only without barrier box, for use with temperature probes and when the logger does not need to be in the oven.
-
INDLPDREDWIREThis 15' (4.5m) connection wire (for the wand or paint pole), which is included with the LPD accessory pack or the LPD Cabled Wand kit, is also available separately here. MPN: LPEDREDWIREINDLPDREDWIREThis 15' (4.5m) connection wire (for the wand or paint pole), which is included with the LPD accessory pack or the LPD Cabled Wand kit, is also available separately here. MPN: LPEDREDWIRE
Part Number Purchase Price INDLPDREDWIRE $25.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$25.00
-
-
BlastOne offers all DeFelsko testing instruments and consumables with easy, on-line ordering capability. This product group includes the Li-Ion batteries used in either the PosiTest HHD or the PosiTest HHD C.
-
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Replacement Caps for Positector® CMM IS measuring probes are available in packs of 4 or 16. The use of these caps is important to ensure the integrity of test results and keep the test monitor protected during testing.
-
INDKITPCSCRNBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These replacement probe screens for the PosiTest PC are included with each new unit, and are available here as replacement parts. MPN: KITPCSCRNINDKITPCSCRNBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These replacement probe screens for the PosiTest PC are included with each new unit, and are available here as replacement parts. MPN: KITPCSCRN
Part Number Purchase Price INDKITPCSCRN $50.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$50.00
-
-
INDUTGPTRNSDCRRepair - don't replace - your DeFelsko® PRBUTG P (Ultrasonic Thickness Gauge Precision probe) when the transducer fails. Save hundreds! BlastOne carries replacement parts for all DeFelsko products including this replacement transducer.INDUTGPTRNSDCRRepair - don't replace - your DeFelsko® PRBUTG P (Ultrasonic Thickness Gauge Precision probe) when the transducer fails. Save hundreds! BlastOne carries replacement parts for all DeFelsko products including this replacement transducer.
Part Number Purchase Price INDUTGPTRNSDCR $435.00 DeFelsko® Replacement Transducer for PRBUTG P – Precision model probe
Part #INDUTGPTRNSDCR
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$435.00
-
-
INDHHDSTRAPThe DeFelsko HHD shoulder strap, which is included in the full HHD kit, is available separately as a replacement item (or as an optional add-on when purchasing the basic HHD kit).INDHHDSTRAPThe DeFelsko HHD shoulder strap, which is included in the full HHD kit, is available separately as a replacement item (or as an optional add-on when purchasing the basic HHD kit).
Part Number Purchase Price INDHHDSTRAP $15.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$15.00
-
-
INDRTRPUTTYRecommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate. This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive. One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.INDRTRPUTTYRecommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate. This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive. One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.
Part Number Purchase Price INDRTRPUTTY $20.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$20.00
-
-
DeFelsko oven temperature probes for use with their OTL system: Extend the reach of the logger with the wide selection of probes as follows:
- Applications. Available in both Surface and Air types.
- Mountings. Available in Magnetic, Clamp, and Washer mounts.
- Lengths. Stainless braided cables commonly stocked in 3 lengths, and custom lengths available by special order.
-
INDSTDRTHelp new staff learn the correct way to take tape impressions for measuring surface profile with this Testex training surface. This training tool is precision cut with inverted v-ridges, simulating a 3.1 mil (78 micron) profile. It is recommended for the trainee to take at least 3 readings with X-Coarse Testex tape to provide practice for the amount of pressure needed to obtain accurate readings. This surface training tool is designed for long life, and can be reused over and over again.INDSTDRTHelp new staff learn the correct way to take tape impressions for measuring surface profile with this Testex training surface. This training tool is precision cut with inverted v-ridges, simulating a 3.1 mil (78 micron) profile. It is recommended for the trainee to take at least 3 readings with X-Coarse Testex tape to provide practice for the amount of pressure needed to obtain accurate readings. This surface training tool is designed for long life, and can be reused over and over again.
-
INDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units. MPN: SSTSWABINDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units. MPN: SSTSWAB
Part Number Purchase Price INDSSTSWAB $10.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$10.00
-
-
INDDPMLLOCKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7. This Kensington lock provides security, helping to ensure that the valuable instrument remains secure. MPN: DPMLLOCKINDDPMLLOCKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7. This Kensington lock provides security, helping to ensure that the valuable instrument remains secure. MPN: DPMLLOCK
Part Number Purchase Price INDDPMLLOCK $65.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$65.00
-
-
INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3
Part Number Purchase Price INDSSTSYRINGE3 $10.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$10.00
-
-
INDCMMISTOOL3PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Replacement Probe Extraction Tools for Positector® CMM IS measuring probes come in packs of 3. The use of this tool helps facilitate the removal of the probe when testing is complete. MPN: CMMISTOOL3PKINDCMMISTOOL3PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Replacement Probe Extraction Tools for Positector® CMM IS measuring probes come in packs of 3. The use of this tool helps facilitate the removal of the probe when testing is complete. MPN: CMMISTOOL3PK
Part Number Purchase Price INDCMMISTOOL3PK $12.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$12.00
-
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector® DPMS version (only) in the Dew Point Meter family of probes has the unique capability of accepting these two optional accessories, which are:
- PRBDPMHSP, Hand-Held Surface Temperature Probe, for spot checking hard-to-reach surfaces
- PRBDPMLTP, Liquid Temperature Probe, for checking the temperature of paint and other industrial liquids
