Replacement Item
Showing 1–15 of 85 results
-
INDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIPINDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIP
-
The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards. The DeFelsko SST test probe is an easy and accurate way to conduct these tests. Test patches are required to perform them and DeFelsko has multiple options, as follows:
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
- Rigid ring. Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
- Flexible ring. Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
- Saves time and money vs. disposable patches.
- Utilizes a plastic needle - no sharp hypodermic needles required!
- Latex Disposable. The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
- Latex-Free Disposable. Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
-
INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.
-
INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5
-
INDPCUSBFIXTBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These retention fixtures for the PosiTest PC are intended to facilitate proper positioning of the USB cable when loading PC Powder Measurements live into PosiSoft software. MPN: PCUSBFIXTINDPCUSBFIXTBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These retention fixtures for the PosiTest PC are intended to facilitate proper positioning of the USB cable when loading PC Powder Measurements live into PosiSoft software. MPN: PCUSBFIXT
-
INDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10. MPN: SSTCUPINDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10. MPN: SSTCUP
-
INDPAPERBTBlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This thermal printer paper is compatible with the DeFelsko Bluetooth printer and is packed in convenient boxes of 10 rolls. MPN: PAPERBTINDPAPERBTBlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This thermal printer paper is compatible with the DeFelsko Bluetooth printer and is packed in convenient boxes of 10 rolls. MPN: PAPERBT
-
Burnishing tools facilitate accurate and easy use of Testex Press-O-Film replica tape. Multiple types available, as follows:
- Economical plastic. Sold in packs of 10, these have 8mm round ends.
- Durable stainless. Same design as the plastic version, but constructed of stainless steel for long life.
- Burnishing ball. Designed to use with optical grade tape, for use with the RTR 3D probe.
-
INDRTRCLEANRecommended best practice when performing replica tape tests with PosiTector RTR instruments is to thoroughly clean the anvils (test surfaces) before performing the test. These Cleaning Cards are premoistened with alcohol and are excellent for removing bits of adhesive and debris from the anvils. Each new RTR comes complete with 5 cleaning cards and additional quantities are available here as needed, in packs of 20.INDRTRCLEANRecommended best practice when performing replica tape tests with PosiTector RTR instruments is to thoroughly clean the anvils (test surfaces) before performing the test. These Cleaning Cards are premoistened with alcohol and are excellent for removing bits of adhesive and debris from the anvils. Each new RTR comes complete with 5 cleaning cards and additional quantities are available here as needed, in packs of 20.
-
BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. Inspection instruments are an investment worth protecting and DeFelsko has a range of protective cases available, as follows:
- The PosiTector Case. Sturdy hardshell design designed to carry a PosiTector gage / body and multiple probes. Space for manuals, calibration certificates, and more. MPN: CASEINSP
- The Pelican Standard Inspection Kit Case. Lightweight, watertight, and crushproof, this case securely stores a PosiTector Gage and 3+ PosiTector probes with customized foam inserts. 13.4" x 11.6" x 6". The MPN is CASEINSP-P.
- The Pelican Large Inspection Kit Case. Like the smaller Standard version above, this unit is lightweight, watertight, and crushproof but is larger to accommodate 5+ probes as well as SST Soluble Salt Tester accessories. 18.2" x 13.4" x 6.7" . The MPN is CASEINSPL-P.
- The Pelican Adhesion Tester Case. Heavy duty, waterproof construction features customized foam inserts for the PosiTest AT-A automatic tester. 18.2" x 13.4" x 6.7". The MPN is CASEATAB-P.
-
INDPOUCHDFTBlastOne carries all DeFelsko instruments, accessories, and supplies. This leather pouch has been specially designed for the PosiTest DFT gauge and economically provides protection for your investment. MPN: POUCH-DFTINDPOUCHDFTBlastOne carries all DeFelsko instruments, accessories, and supplies. This leather pouch has been specially designed for the PosiTest DFT gauge and economically provides protection for your investment. MPN: POUCH-DFT
-
Thickness Standards are used to verify the accuracy and operation of coating thickness gauges. As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration. These Plastic Shims (aka foils) are low-cost alternative to coated metal plates. They are available in Certified (individual shims or full sets) and in Un-Certified sets. Accuracy is somewhat less than metal plates and they are more sensitive to heat. They are intended for use over a Zero Plate, or over an uncoated substrate. A set of un-certified plastic shims is included with most electronic DeFelsko coating thickness gauges. Replacement sets and certified options are available here as follows:
- Un-Certified. These are checked for accuracy within tolerance shown below at DeFelsko, but are not traceable to any standard. They come as a set of 5 only, in the following approximate thicknesses:
- 25 microns / 1 mil (Orange), +- 20% accuracy
- 50 microns / 2 mils (Red), +- 10% accuracy
- 125 microns / 5 mils (Blue), +- 5% accuracy
- 250 microns / 10 mils (Brown), +- 5% accuracy
- 500 microns / 20 mils (Yellow), +- 5% accuracy
- Certified. Includes certificate of calibration traceable to PTB and all are accurate to within 2 microns / 0.08 mils. Available in the following thicknesses individually, or as a complete set of 8 shims:
- 25 microns / 1 mil (Orange)
- 50 microns / 2 mils (Red)
- 75 microns / 3 mils (Green)
- 125 microns / 5 mils (Blue)
- 250 microns / 10 mils (Brown)
- 500 microns / 20 mils (Yellow)
- 1000 microns / 40 mils (White)
- 1500 microns / 60 mils (Black)
- Un-Certified. These are checked for accuracy within tolerance shown below at DeFelsko, but are not traceable to any standard. They come as a set of 5 only, in the following approximate thicknesses: