Replacement Item
Showing 16–30 of 70 results
-
DeFelsko oven temperature probes for use with their OTL system: Extend the reach of the logger with the wide selection of probes as follows:
- Applications. Available in both Surface and Air types.
- Mountings. Available in Magnetic, Clamp, and Washer mounts.
- Lengths. Stainless braided cables commonly stocked in 3 lengths, and custom lengths available by special order.
-
INDSSTSWAB
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units.
MPN: SSTSWAB
INDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units.
MPN: SSTSWAB
-
INDDPMLLOCK
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7. This Kensington lock provides security, helping to ensure that the valuable instrument remains secure.
MPN: DPMLLOCK
INDDPMLLOCKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7. This Kensington lock provides security, helping to ensure that the valuable instrument remains secure.
MPN: DPMLLOCK
-
INDSSTSYRINGE3
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used.
MPN: SSTSYRINGE3
INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used.
MPN: SSTSYRINGE3
-
INDCMMISTOOL3PK
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
Replacement Probe Extraction Tools for Positector® CMM IS measuring probes come in packs of 3.
The use of this tool helps facilitate the removal of the probe when testing is complete.
MPN: CMMISTOOL3PK
INDCMMISTOOL3PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
Replacement Probe Extraction Tools for Positector® CMM IS measuring probes come in packs of 3.
The use of this tool helps facilitate the removal of the probe when testing is complete.
MPN: CMMISTOOL3PK
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
The PosiTector® DPMS version (only) in the Dew Point Meter family of probes has the unique capability of accepting these two optional accessories, which are:
- PRBDPMHSP, Hand-Held Surface Temperature Probe, for spot checking hard-to-reach surfaces
- PRBDPMLTP, Liquid Temperature Probe, for checking the temperature of paint and other industrial liquids
-
INDGLSCLEANKIT
The DeFelsko GLS Gloss Meter has an on-board calibration standard. Periodically, or when dust / dirt are visible, the gloss standard should be cleaned to ensure measurement accuracy.
10 packs of cleaning wipes are included with each new DeFelsko GLS kit. This item is also a set of 10 wipes, and is available separately as a replacement order item.
MPN: GLSCLEANKIT
INDGLSCLEANKITThe DeFelsko GLS Gloss Meter has an on-board calibration standard. Periodically, or when dust / dirt are visible, the gloss standard should be cleaned to ensure measurement accuracy.
10 packs of cleaning wipes are included with each new DeFelsko GLS kit. This item is also a set of 10 wipes, and is available separately as a replacement order item.
MPN: GLSCLEANKIT
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector Surface Profile Gauges have replaceable tungsten carbide tips and are available as follows:
- 60° Angle for ASTM (USA) applications, used in the Integral, Standard Cabled, and Convex Cabled probes.
- 30° Angle for AS 3894.5-C (Australia) applications, also used in the Integral, Standard Cabled, and Convex Cabled probes.
- CS Tip for Textured Coatings probes.
- TS Tip for Concrete Surface probes.
-
INDSSTNEEDLE
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.
INDSSTNEEDLEBlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.
-
INDCMMISBAT
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
Replacement batteries for the PosiTector CMM IS concrete moisture measuring probes are available in packs of 10.
With a fresh battery, each probe can remain powered for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ.
INDCMMISBATBlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
Replacement batteries for the PosiTector CMM IS concrete moisture measuring probes are available in packs of 10.
With a fresh battery, each probe can remain powered for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ.
-
INDDPMLBAT
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
The DPM L PosiTector Dew Point Meter Logger uses (2) lithium CR 2032 coin-type batteries.
Replacement batteries are available in packs of 5 here.
MPN: DPMLBAT
INDDPMLBATBlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
The DPM L PosiTector Dew Point Meter Logger uses (2) lithium CR 2032 coin-type batteries.
Replacement batteries are available in packs of 5 here.
MPN: DPMLBAT
-
INDSSTDISPTIP
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units.
MPN: SSTDISPTIP
INDSSTDISPTIPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units.
MPN: SSTDISPTIP
-
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
Replacement fins for the PosiTector CMM IS probe come in packs of 4 or 16.
The fins help ensure the stability of the probe in the test hole and should be replaced when worn.
-
INDCMMISSS10PK
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
Salt solution packets for Positector® CMM IS measuring probes come in packs of 10.
The salt packets are part of the calibration-check process, and are used in the calibration container.
MPN: CMMISSS10PK
INDCMMISSS10PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
Salt solution packets for Positector® CMM IS measuring probes come in packs of 10.
The salt packets are part of the calibration-check process, and are used in the calibration container.
MPN: CMMISSS10PK