BlastOne

Schmidt Tera Valve Retrofit Kit

Part no. DM2130RK32

Request a quote
Guaranteed Quote within 48 Hours

The Tera Valve Retrofit kit includes all the components needed to convert a pressure release blasting system into a pressure hold blasting system.

The Schmidt Tera Valve is one of the greatest developments in the abrasive blasting industry, effectively replacing the Thompson 2 Valve for most applications. 

If you are currently using a pressure release blast pot and need to upgrade it to a pressure hold, that means convert it to a blast machine that holds the pressure and air in the pot when you release you deadman handle, then this retro-fit kit is the one for you.

A Pressure release blasting system will take about 10 seconds to stop and restart when the deadman is released and re-engaged, where a pressure hold system has a 2 second response time for the sand blasting operator. So if you are someone doing a lot of start/stop sandblasting work, upgrading to the new Tera Valve is a must for you.

APPLICATION

Typically used to convert existing blast pot to a pressure hold blasting system, avoiding loud blowdowns, abrasive waste, and delayed startup.

SPECIFICATIONS

  • Air Requirements: 75 psig
  • Piping sizes: 3/4";1";1-1/4";1-1/2"
  • Weight: 10.6 lbs
  • Dimensions: 5.5" x 4.625" x 10.5"
  • Can be retro-fitted to any blast pot that has at least 9" of clearing below the pipe nipple.