BlastOne

Schmidt Thompson Valve 2

Part no. GV2152008

Request a quote
Guaranteed Quote within 48 Hours

The Schmidt Thompson Valve 2 is a next-generation Thompson Valve designed to provide the ultimate in metering performance. It is a normally closed, seal sealing, abrasive metering valve with instant, smooth response to either pneumatic or electric deadman controls.  Threaded-plunger metering design with air actuated operation.

APPLICATIONS

The Thompson II valve shuts off abrasive flow to the nozzle while sealing the abrasive tank.  Ideal for multiple outlet use.  Pot stays pressurized to give you quicker response.  Perfect for spot blasting. 

Not recommended for use with fine dusty abrasive commonly used in the powder coating industry.

SPECIFICATIONS

  • Rugged, simple, bolted construction
  • 1½" (38mm) thread abrasive inlet port
  • Features 1" (25mm) thread side-cleanout port
  • Heavy Duty tungsten carbide sleeve
  • Specify air connection size
  • Use HF BTC blast coupling - not included (order separately)
  • Suitable for use with all approved blasting abrasives

COMMONLY ORDERED

Item No. Description Part No. Mfg Part No.
  Series II Thompson Valve 1 1/4" (32mm) GV2152007 2152-007
* Replacement Seals Kit (Tungsten Carbide). Suites Tungsten Carbide Sleeve (*) GV215200098 2152-000-98
+ Replacement Seals Kit (Urethane). Suits Urethane Sleeve (+) GV215210098 2152-100-98
** Service Kit for Series II Thompson Valve (**) GV213000098 2130-000-98
 

PARTS BREAKDOWN

Schmidt Thompson II Parts Breakdown
Item No. Description Part No. Mfg Part No.
1. Knob GV215200001 2152-000-01
2. Hex Bolt, 3/8" UNC 1 1/4" Lg. GV701050707  
3. Washer GV702750302 7027-503-02
4. Breather Vent GV215200017 2152-000-17
5. Spring Retainer GV215200012 2152-000-12
6.*+** O-Ring GV215200018 2152-000-18
8.*+** Cap Gasket GV215200016 2152-000-16
9. Vibration Ring GV215200025 2152-000-25
10. Spring GV215200003 2152-000-03
11. Nut GV214900008 2149-000-08
12.*+** Piston Seal GV214900004 2149-000-04
13. Piston GV215200005 2152-000-05
14. Cylinder GV215200009 2152-000-09
15. Body GV214900014 2149-000-14
16. Sleeve Pin GV214900016 2149-000-16
17. Plug GV3014806  
18.+** Urethane Sleeve GV215200013 2152-001-13
19.*+** Plunger Seal, 1-facing up, 2-facing down GV215200006 2152-000-06
20.** Tungsten Carbide Plunger GV215200007 2152-000-07
21.* Seat GV215200010 2152-000-10
22a. Hardened Base 1" NPT GV215200019 2152-000-19
22b. Hardened Pipe Base 1 1/4" (32mm) GV215200015 2152-000-15
22c. Hardened Pipe Base 1 1/2" (32mm) GV215200011 2152-000-11
23. Hex Bold, 3/8" UNC 4 3/4" LG GV7010500795 7010-507-95
24.* O-Ring for Tungsten Carbide Sleeve GV215200021 2152-000-21
25a.* Tungsten Carbide Sleeve GV215200013 2152-000-13
25b. Tungsten Carbide Keyslot Sleeve for Very Fine medias GV215220013 2152-200-13
25c. Multiport Sleeve Tungsten Carbide GV215232020 2152-320-20

  * Included in Replacement Seals Kit (Tungsten Carbide)
+ Included in Replacement Seals Kit (Urethane)
** Included in Service Kit for Series II Thompson Valve