BlastOne

Taper Flange Beams, Channels and Junior Universal Beams

Designation Profile Distance Profile Surface Area per metre Profile Surface Area per tonne Profile Distance Less One Flange Face Profile Surface Area Less Ara of One Flange Face per metre Profile Surface Area Less Ara of One Flange Face per tonne
  mm sqm/m sqm/tonne mm sqm/m sqm/tonne
Taper Flange Beams
178 x 89 658 0.658 29.4 569 0.569 25.4
152 x 76 562 0.562 31.4 486 0.486 27.2
125 x 65 470 0.470 35.7 405 0.405 30.8
100 x 45 349 0.349 48.5 304 0.304 42.2
Channels
380 x 100 1130 1.13 20.7 1030 1.03 18.8
300 x 90 932 0.932 23.2 842 0.842 21.0
250 x 90 834 0.834 23.5 744 0.744 21.0
230 x 75 737 0.737 29.4 662 0.662 26.4
200 x 75 678 0.678 29.6 603 0.603 26.4
180 x 75 638 0.638 30.5 563 0.563 26.9
150 x 75 580 0.580 32.8 505 0.505 28.5
125 x 65 480 0.480 35.7 415 0.415 30.9
100 x 50 374 0.374 40.0 324 0.324 34.6
74 x 40 286 0.286 43.0 246 0.246 37.0
Junior Universal Beams
180 UB 22 691 0.691 31.1 601 0.601 27.1
18 685 0.685 37.8 595 0.595 32.9
               
150 UB 18 584 0.584 32.4 509 0.509 28.3
14 576 0.576 41.1 501 0.501 35.8

DISCLAIMER: All and any tables, calculations, factors, formulas, etc ‘information’ on any of these pages are a guide only and shall not be taken as either the approved nor standard nor complying method nor formula nor calculation for any of the topics or aspects referred to, and neither is any claim made as to the completeness or accuracy of the ‘information’. It is the responsibility of the reader and/or users of this information to separately determine and verify the correct method, formula, factor, procedure, data, etc. for determining any such topics or aspects as directed or required or indicated in or by any work specifications and/or standards. Blast-One™ expressly disclaims any liability for the use or misuse of the ‘information’.