BlastOne

THE SCHMIDT BULK AMPHIBLAST

Wet or dry blasting to tackle high-production environments

Wet & Dry Blasting - Even Simultaneously!

  • Operate 1-3 nozzles/outlets simultaneously
  • Each nozzle can be independently set for either wet blast, dry blast, softwash, or blowoff
  • 45 cu. ft. - 120 cu. ft. / 3400 liters
  • 1-1/2 bulk bag - 18000 lbs / 8.2 tonne abrasive capacity Garnet
  • 1-1/2 bulk bag - 12000 lbs / 6 tonne abrasive capacity Slag
  • Safety-ensured HALOK® system mechanically requires the operator to follow proper saftey procedures to open the 10" closure
  • The CEN™ blowdown system reduces blowdown noise levels to approximately 92 dba (equivalent to traffic noise) and prevents frost buildup.



Get a Custom Quote
 

 

SAVINGS AND SAFETY GO HAND-IN-HAND

The Bulk AmphiBlast uses the efficiency and productivity gains of the acclaimed Schmidt® bulk blasters, combined with the innovation of the AmphiBlast technology to produce a superior dual-purpose system for high production environments.

At the heart of the abrasive control system is the robust Schmidt Thompson® Valve II, used globally for nearly two decades and capable of metering a wide range of coarse or fine abrasives in the AmphiBlast system. Dry blasting with the AmphiBlast features the same productivity gains and safety advantages found only in Schmidt systems. When wet blasting, operators can set and immediately see any change in water flow by using the gage readout. This allows the operator to dial in and consistently repeat the water flow for minimal water consumption, maximum productivity, minimum abrasive use or any other preference.

Softwash™/Blowoff
The unique softwash feature automatically lowers blast air pressure and increases water flow for an effective, gentle rinse at the flip of a switch. Flip the switch back, and the unit returns to the same blast pressure setting as before. Changing to blowoff mode is just as easy, and also provides a lower blast air pressure for easier, safer and quieter operation.  
 


Get a Custom Quote
 

 

DRY BLAST, WET BLAST, SOFT WASH, BLOW OFF

Easily change applications in just a few minutes, which allows you to change from Dry-blasting to Washing without wasting any time. Easy to use UHP Water Jetting, Wet Blasting, camera inspection, NDT, induction or any other desired application.
 


Get a Custom Quote
 

Easily change applications in just a few minutes, which allows you to change from Dry-blasting to Washing without wasting any time. Easy to use UHP Water Jetting, Wet Blasting, camera inspection, NDT, induction or any other desired application.
 


Get a Custom Quote