FREE SHIPPING ON ORDERS OVER $100! | SEE IF YOU QUALIFY FOR A BLASTONE CREDIT ACCOUNT x

Search: blast nozzles

Products

Hyper High Performance Silicon Nitride Blast Nozzle

Designed with an extra-long venturi and concentrated blast pattern, the Hyper (aka XL or Saber) nozzle increases performance substantially. Additional details as follows:

Click for Buying Guide

  • Performance characteristics:
    • Up to 30% faster coating removal and/or
    • Allows greater stand-off distance (reduces need to bend over when blasting tank floors, allows greater reach, etc.)
  • Thread types & Orifice Size options:
    • Contractor 2″ (50mm)
    • Fine 1-¼” (32mm)
    • Orifice size options:  5, 6, 7, 8, & 10
  • Liner:
    • SiALON silicon nitride, provides longer life and lighter weight than tungsten carbide.
  • Jacket:
    • All aluminum, non-slip knurled finish
  • Design:  
    • 1-¼” throat entry, extended venturi, 12 inches long

RAPTOR Large Pattern Silicon Nitride Blast Nozzle

Designed with a 60% larger blast pattern, the Raptor (aka Bazooka) nozzle makes short work of your large commercial blast / sweep blast / brush blast projects.  Additional details as follows:

Click for Buying Guide

  • Thread types:
    • Contractor (2″) aluminum threads
    • Fine (1-¼”) brass threads
  • Liner:
    • Silicon nitride, offers lighter weight and longer life than tungsten carbide.
  • Jacket:
    • Urethane, for improved resistance to damage
  • Design:
    • 1-¼” throat entry, extended venturi

Ultra-Tuff Extended Life Silicon Nitride Blast Nozzle

This general-purpose nozzle was designed for everyday use, only better – it lasts longer and offers greater ease of use!  It features the following:

Click for Buying Guide

  • Performance characteristics:
    • Venturi design provides up to 40% faster production than straight bore versions.
  • Thread type & Orifice Size options:
    • Contractor 2″ (50mm)
    • Fine 1-¼” (32mm)
    • Orifice size options:  3, 4, 5, 6, 7, 8
  • Liner:
    • Silicon nitride, provides longer life and lighter weight than tungsten carbide.
  • Jacket:
    • All-polyurethane – reduces ‘jams’ in metal nozzle holders
    • Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
  • Design:
    • 1″ throat entry on #3 and #4 Contractor thread AND all Fine thread options
    • 1-¼” throat entry on #5, 6, 7, and 8 Contractor threads
  • Additional notes:
    • Approximately half the weight of standard tungsten carbide nozzles.
    • Although the up-front cost is higher than tungsten carbide, the longer life Ultra-Tuff offers same or better total cost of ownership.

SnakeBite Strike #10 Silenced Blast Nozzle

  • WATCH VIDEO IN THE IMAGE SLIDER
  • Highest productivity hand held blast nozzle available
  • Over double the productivity of a #8 high performance blast nozzle with less operator fatigue
  • Half the thrust of other #10 blast nozzles available – Feels like you’re blasting with a #7 nozzle
  • Up to 16dBA noise reduction – That’s 75% quieter!
  • Ideal for blasting acres of steel such as storage tanks, bridges and ship hulls
  • Standard contractor nozzle inlet thread
  • Delivers faster cleaning rates and increased profit by reducing project duration
  • Requires 750cfm compressor
  • FREE TRIAL AVAILABLE!

SnakeBite Flex Silenced Blast Nozzle

All the power. Half the size!

  • Up to 16dBA noise reduction
  • Up to 45% less fatigue compared to standard blast nozzles
  • Improved nozzle geometry
  • New technology quick-connect nozzle silencer
  • Durable and lightweight Silicon Nitride nozzle and silencer liner
  • Slimline ergonomic nozzle jacket
  • Standard contractor nozzle inlet thread
  • 2 versions available
    • Standard Pressure Nozzle effective between 90-110 psi
    • Low Pressure (LPS) Nozzle effective between 70-90 psi
  • FREE TRIAL AVAILABLE

Act quick! Limited supply.

View All

Nozzle Wear Size Analyzer Gauge

The “Blast Nozzle Wear Size Analyzer Gauge” (SKU: INH131PBAG) efficiently determines the internal diameter and wear level of a blast nozzle orifice, ensuring optimal blasting performance.

  • Used to determine the internal diameter of a blast nozzle orifice
  • Allows you to determine the level of wear of the blast nozzle
  • Comes with a removable cap and crayon
  • Has size markings to allow you to see quickly what size your nozzle is
  • Sold Individually

Tungsten Carbide Blast Nozzles for ConeBlast Internal Pipe Blasting Tool

The blast nozzle for the ConeBlast Internal Pipe Blaster is a key element in controlling the volume of air/abrasive flow.  It is subject to high wear and is a common replacement part.  Additional details:

  • Sizes.  Two sizes are available, depending on the capacity of your compressed air source.
    • BNAFR8 requires 250CFM
    • BNARF10 requires 400CFM
    • (The size variants are interchangeable.)
  • Construction.  These nozzles are made from tungsten carbide.  For large pipe-cleaning projects, contact us for options on longer-life versions.

Kennametal TVP Tungsten Carbide Blast Nozzle

Standard Tungsten Carbide (aka TVP) blast nozzles are widely used and are a lower-cost, basic general-purpose nozzle with the following characteristics:

Click for Buying Guide

  • Performance characteristics:
    • Venturi design offers up to 40% greater production than straight bore.
  • Thread Types:
    • 1-1/4″ NPSM (32mm) brass fine threads
    • 2″ (50mm) aluminum contractor threads
    • Flange type (unthreaded, and attaches to a blast hose with a standard blast hose quick coupling instead of a nozzle holder)
  • Orifice Sizes:  
    • Contractor & Fine:  3, 4, 5, 6, 7, 8, 10, 12
    • Flanged:  6, 7, 8, 10, 12
  • Liner: 
    • Tungsten Carbide, provides longer life than disposable alternatives for industrial blasting projects
  • Jacket:  
    • Contractor and Fine thread versions have poly jacket
    • Flanged type is an all-aluminum jacket
  • Design:
    • 1″ (25mm) throat entry for #3 and #4 sizes
    • 1 1/4″ (32mm) throat entry, for all other sizes
  • Additional notes:
    • Lowest up-front cost of any industrial blast nozzle.
    • Higher weight and shorter lifespan than premium silicon nitride versions.
    • Lower total cost of ownership, higher performance, and/or improved ease-of-use may be achieved with one of the premium nozzle options.  See You May Also Like below.

HOLD*BLAST Rust Inhibitor by Chlor-Rid

  • Hold*Blast is a cost-effective flash rust prevention solution
  • Environmentally safe and compatible with all coatings
  • It is used to “Hold the Blast” to allow primer to be applied
  • Added in low concentration (2-10%) to the ‘blast water’ to prevent flash rusting
  • Ideal to mix with your water when wet blasting
  • Compare to Hold*Tite 102!
  • 32 pails ship on 1 pallet

Rotoblast Internal Pipe Blasting Tool

The RotoBlast is the fastest way to blast the internals of pipes.  This IPC1000 version is designed for pipes from 10″ to 35″ ID. Fast and effective blasting is ensured by the twin-nozzle spinning blast head.

Additional details of this Internal Pipe Blaster are as follows:

  • 360 degree blasting covers the entire ID of the pipe
  • Speed is manually controlled.  Optional electric winch is also available, helping to save labor and aid consistency in results.
  • This IPC1000 pipe blasting tool works in pipes 10″ to 35″ ID
  • Nozzles sold separately – details below:
    • 2 nozzles are required for this unit.
    • Use BNAT nozzles for pipes from 8″ to 11″ ID.
    • Use BNASB nozzles for pipes from 12″ to 36″ ID.
  • Centering carriage sold separately – details below:
  • Note:  ID blasting equipment requires significant maintenance.  A Rotoblast Repair Parts Kit is available for convenience, or individual parts may be purchased under the Parts Tab.  An operators manual is shown under the documents tab or you can contact us for further information.

Fine Thread Nozzle Holder for VCBV200

  • Suit Blast and Vac Workhead VCBV200
  • Fine Thread Nozzle Holder
  • Connects Blast hose to the nozzle and the workhead.
  • You can not use the Workhead without this
  • Sold Individually

Water Injection High Pressure Wet Blast Attachment

Adapts a contractor thread nozzle to a wet blasting nozzle.  More control than with a halo nozzle.

  • Injects water internally into the abrasive / air stream
  • Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
  • Includes needle valve to optimize mixture
  • Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow

Blast Nozzles, Short with Straight Bore. Brass Thread with Poly Jacket

Short nozzles with straight bore are made for close-range spot blasting. The blast pattern is small, making it ideal for cleaning small areas, railings, etc. Other details as follows:

  • Fine thread, 1-¼” – 11-½” NPSM
  • Available in sizes from #3 to #8
  • Tungsten carbide liner

Pinovo PiBlast Automated Pipe Vacuum Blasting

  • The PiBlast is designed for automatic blast cleaning of metal pipes.
  • This system allows for efficient pipe blasting without the investment of a permanent installation.
  • Has 4 blast nozzles which each blast 1/4 of the pipe
  • Only available to blast 8″
  • Genuine Parts – Manufactured by Pinovo in Norway
  • Not Available in USA – Request a quote/express interest

Water Induction Nozzle for wet blasting

The Water Induction Nozzle (aka WIN nozzle) is an economical way to enter the wet blasting market.  Commonly used in smaller projects, it offers excellent water flow control.  Additional Details:

  • Use with standard dry blasting equipment.  No modifications required.
  • Connects to standard garden hose, or you can use a tank with a standard 12v pump if you need to add rust inhibitor to the water.
  • Typically stocked with tungsten carbide liner and contractor threads, it is also available with silicon nitride liner and/or fine threads.  Contact us for details.

Unfitted Blast Hose – Heavy Wall 4ply

BLASTHOSE

  • High quality, long lasting sandblasting hose
  • Blast Hoses have a thick, anti-static, natural rubber liner
  • Made to BlastOne Blast Hose specification
  • Rated to minimum 175 psi – 3:1 safety factor
  • Robust TuffRap™ outer blasting hose cover
  • Heavy Wall Blast Hose
  • Recommended for use as an extension hose
  • Fit with your choice of couplings
  • Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.

Blasting Time Clock for Blast Pot Nozzle

  • Compatible with a wide range of blast pots
  • Digital display of actual blasting time for individual blast outlets
  • Allows you to determine productivity, production rates, assisting project costings, job estimates and scheduling maintenance for common wear items
  • System available to run off pneumatic and electric deadman controls
  • Triggered instantly by the deadman signal, so you get actual blasting hours
  • Options available for single and multiple outlets.

Nozzle Pressure Test Kit

The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.

  • For testing air pressure at the nozzle
  • Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
  • Insert about 6-10ft behind blaster for most accurate reading
  • Test kit includes:
    • Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
    • Four needles and instructions
    • Protective leather bound case
  • Sold as a Kit
  • MPN 2010-014-03

Note – there is no calibration certificate process available for this item.

ConeBlast Internal Pipe Blasting Tool

  • Used for blasting pipe internals with 3″-12″ ID
  • Blasts in a 360 degree pattern
  • Units come standard with Tungsten Carbide deflector tip
  • Select the unit that will best match your Air Supply:
    • IPC4000, 1/2″ Throat Nozzle: 250 cfm
    • IPC4500, 5/8″ Throat Nozzle: 400 cfm
  • Order Transport Carriages separately as follows:
    • IPC4100, Collar and Button, for 3″-5″ ID
    • IPC4200, Scissor, for 5″-12″ ID
    • Requires BSP (not NPT) threaded coupling to attached to standard blast hose coupling, part number HFSTC1BSP, available here or under the repair parts tab below.
  • Successful Internal Pipe Projects require some specialist knowledge – contact our team for assistance
  • Note:  This product is similar to the Clemco Hollo-Blast

Ninja Silenced Blast Nozzles

The Blast Ninja nozzle is an option for reducing the noise of blasting in certain applications.  It offers price-leading economy for applications where production speeds are not critical. Product details are as follows:

  • Sizes.  Comes in #4, #5, and #6 orifices.
  • Threads.  Offered in fine or contractor thread in poly, brass, or aluminum threads.
  • Liner options.  Available in tungsten carbide or extended-life silicon nitride.

Blast Hose Nozzle Holder Fittings

Nozzle holder for blast hose 

  • Couples the blast nozzle to the blast hose
  • Choose your blast nozzle thread type;
    • 3/4″ Medium (aka Mitey-Mite) Thread
    • 1-1/4″ Industrial Fine Thread
    • 2″ Coarse/Contractor Thread *Contractor Favorite*
  • Available in Nylon, Brass or Aluminum
  • Click the Documents tab below to view full selection
  • Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3

SnakeBite XQ Silenced Blast Nozzle

Snakebite.  The world’s quietest blast nozzle!

Click for Buying Guide

  • Up to 16dBA noise reduction
  • Up to 45% less fatigue compared to standard blast nozzles
  • Improved nozzle geometry
  • New technology quick-connect nozzle silencer
  • Durable and lightweight Silicon Nitride nozzle and silencer liner
  • Slimline ergonomic nozzle jacket
  • Standard contractor nozzle inlet thread
  • 2 versions available
    • Standard Pressure Nozzle effective between 90-110 psi
    • Low Pressure (LPS) Nozzle effective between 70-90 psi
  • FREE TRIAL AVAILABLE

Unfitted Blast Hose – Whip SupaFlex 2ply

  • Superior quality, lightweight and highly flexible sandblasting hose
  • Blast Hoses have anti-static, natural rubber liner
  • Rated to minimum 175 psi – 3:1 safety factor
  • Robust TuffRap outer blasting hose cover
  • Commonly known as whip hose, supa hose or supahose
  • Fit with your choice of nozzle holder and couplings
  • Please Request Rental Pricing

Mega Blaster Bulk Blast Machine

Production work-horse for big dry-blast projects!  Save time and money when doing large projects.

  • Industrial Quality & Design – Manufactured by Schmidt to BlastOne specifications
    • Long-life TeraValve metering valves – typically 4-outlets
    • High flow plumbing virtually eliminates pressure drop
  • Huge abrasive capacity – Up to 160 cubic foot (aka 8 ton pot) holds half a truckload of garnet!
  • Flexible configuration – Available with:
    • Highway Trailer
    • Yard Trailer
    • Skid mount
    • Shipping Legs (for mounting on your own equipment)
  • Latest Generation Safety features
    • Halok closure – impossible to open under pressure
    • CEN muffler – reduces noise AND prevents freeze-up
    • Anti-slip ladder rungs
  • Available Performance Enhancing Options
    • Bulk Bag Loading Rack – enhances safety while loading
    • Hybrid – attached dryer saves space & setup time
    • Vacuum loading – saves wait time for cranes where forklift loading of abrasive is prohibited
    • Hour meters – management tool monitors nozzle time

Favorite for use with the VertiDrive robots! Rent or purchase.  

30 Day Money-Back Guarantee | Free Return | 90 Day Manufacturer Warranty

Note:  Designed to be used with a 1600 CFM dryer, available here.

SnakeBite XP Blast Nozzle (w/o Silencer)

The SnakeBite XP is the high-performance nozzle used in the highly successful SnakeBite XQ silenced configuration.  As the XP uses a simple bump cap on the end (instead of the silencer), it does not have the noise and thrust reduction of the XQ. It is very fast and exceeds the performance of our hyper nozzle.  Details as follows:

  • Performance:
    • The advanced modeling used when designing this Snakebite XP hyper nozzle has taken blasting performance to a whole new level.  The refined internal geometry coupled with the non-silencing bump-cap produces very fast cleaning speed indeed.
  • Liner:
    • The new internal geometry when combined with the silicon nitride composition extends usable life greatly.
  • Jacket:
    • Anodized aluminum with ergonomic shape makes for a very comfortable grip.
  • Sizes:
    • Available in the following orifice sizes:  6, 7, 8, & 10
    • Overall length varies from 10″ to 13″, depending on orifice size.
  • Thread type:
    • Available in standard 2″ Contractor thread only.  (See You May Also Like nozzle thread adapters below if you want to use with fine thread nozzle holders.)

Note:  Inquire for details about our free trial offer.

SnakeBite Blast Nozzle Silencers

  • Replacement silencers for the SnakeBite family of blast nozzles
  • Up to 45% less operator fatigue
  • Up to 16dB noise reduction
  • 2 versions available
    • Standard Pressure Silencer effective between 90-110 psi
    • Low Pressure Silencer (LPS) effective between 70-90 psi

Blast Nozzles, short with venturi bore

Short venturi nozzles are made for close-range blasting. The venturi allows the widest possible pattern in limited space environments. Other details as follows:

  • Available in either Contractor thread (50mm) or Fine thread (1-¼”)
  • Available in orifice sizes from #3 to #12
  • Tungsten carbide liner
  • Multiple jacket types available

Call / chat / email us if the version you are looking for is not shown.

Squat Aftercooler AirDryer System

Enhance your blasting operations with the Squat Aftercooler AirDryer System, a compact, industry-standard moisture removal solution designed to increase blasting speed by up to 15%. Leveraging an Aftercooler design for optimum cooling, this system effectively removes moisture, saving on abrasive costs, and comes in sizes tailored to your compressor capacity. Rugged, portable, and equipped with a stainless steel demister pad for effective moisture removal, the Squat Aftercooler AirDryer System is built for high performance in high humidity and varied temperature environments.

  • The Industry Standard AirDryer
  • Squat Compact Design
  • Uses Aftercooler design to cool the air for maximum moisture removal
  • Pneumatic Fan motor
  • Easy Maintenance
  • Size based on the size of your compressor
  • ACS250Squat – Rated to 250 cfm (good for 1x #6 blast nozzle)
  • ACS400Squat – Rated to 400 cfm (good for 1x #7 blast nozzles
  • ACS750Squat – Rated to 750 cfm (good for 2 blasters)
  • ACS950Squat – Rated to 950 cfm (good for 2 blasters or occasionally 3)
  • This unit will perform best when used in climates where the ambient temperature is above 50°F. Not recommended for use in climates that freeze. Recommend P-ACSD.

Tite-Space Angle Nozzles

Tite-Space nozzles are angle nozzles, designed for use in areas that are especially difficult to access, and feature:

  • 3/8″ NPT Thread in either Male or Female configuration
  • Male version has brass threads and requires a minimum opening clearance of 1″.  This version is 1-7/8″ long.
  • Female version has steel threads and requires a minimum opening clearance of only ¾”.  This version is 3-1/8″ long.
  • These nozzles are often used in conjunction with our Tite Space Invader Blasting Kit, available here
  • Angle options include:
    • 45° & 60° forward blast
    • 90° right angle blast
    • 135° reverse blast
  • Some options available in double, triple or quad orifices in addition to single.
    • Note:  Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly.
  • Stock version uses tungsten carbide lining.

Note:  Due to the angled blast stream, these nozzles will wear more quickly than traditional versions.  For larger projects, we offer long-life Roctec nozzle linings by special order, with a minimum order quantity of 5.  Contact us for further details.

Curved Blast Nozzle AKA Banana Nozzle

  • Curved “Banana” Blast Nozzle
  • Made from Boron Carbide which is the longest lasting material used for blast nozzles
  • Size listed is a #6, which is 3/8″ internal diameter
  • Has a Medium 3/4″ Thread – Requires a special nozzle holder adapter
    • Search for “nozzle thread adaptors” to select an adaptor to use with your existing nozzle holder, or contact BlastOne if you want a medium thread nozzle holder.
  • Sold Individually

FAN BLAST™ Fan Pattern SiALON Blast Nozzle

FAN BLAST™ Fan Pattern SiALON Blast Nozzles give wide, even blast patterns, ideal for sweep blasting. Different variations include:

  • 2″ UNC (50mm) coarse contractor thread
  • 1-1/4″ ( N.P.S.M.) fine industrial thread

Also available with tungsten carbide liner – enquire for price and lead time.

At present, this nozzle is available only with a #6 orifice.  An alternative nozzle type for this application, which is available in multiple orifice options, is the Raptor / Bazooka nozzle.

Nozzle Gaskets

Nozzle gaskets (aka nozzle washers) help reduce static electricity and nozzle wear.  Below is information on the various types:

  • Brass or Aluminum nozzle holders.
    • For Medium thread (¾”), use HFGFBSP / NW-1.
    • For Contractor thread (2″), use HFGFBLP / NW-3.
    • For Fine thread (1-¼”), use HFGFBMP / NW-4.
  • Nylon nozzle holders.
    • For 1″ (Narrow) Nozzle throat, use HFG25P / NW-25.
    • For 1-¼” (Wide) Nozzle throat, use HFG32P / NW-32.

Nozzle gaskets (aka nozzle washers) help reduce static electricity and nozzle wear.

VertiDrive V700 Blasting Robot

RENT or PURCHASE this surface preparation work-horse! The next-generation V700 VertiDrive. Boosting performance and profits on large blasting projects.

Purchase pricing is typically between $125,000 and $204,000, depending on configuration.

BlastOne can provide on-site training and ongoing support to ensure maximum productivity from Day 1.  Schedule a call with our SMEs to calculate and expected ROI for your next project.

  • Faster Production.  Now holds up to 3 nozzles and each nozzle is up to 30% faster than the best hand blasting.  Highest productivity of any robotic blasting system!
  • Cleaner Surface.  Provides consistent blasting quality by adjustment of equipment speed to the specific surface needs.
  • Safer.  Remote control operation removes the operator from harms way.
  • Capable.  Boosted magnetic performance allows standard operation on carbon steel surfaces that are horizontal, vertical, and now even upside-down!
  • Versatile.  The V700 can be configured in 3 ways:
    • Abrasive Blasting.  Can blast either wet or dry.
    • Ultra High Pressure (UHP) coating removal.
    • Power Wash surface cleaning.
  • Reduced Cost-of-Ownership.  The VertiDrive V700 has the lowest maintenance cost of any blasting robot.
  • Looking for more information? Click here to read more…

Note:  We recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) and can deliver cost savings on projects as small as 10,000 square feet.  Not all medias can be used with the VertiDrive. Can be used with existing blast or UHP equipment, or BlastOne can provide new and updated equipment.

Western Technology 3475 LED Blast Light – Hose Mounted

AVAILABLE FOR RENTAL OR PURCHASE

  • The Western Technology 3475 is the #1 Nozzle Mounted Blast Light preferred by Blasting Contractors
  • Powerful 1,325 lumen LED light array
  • Can be hose mounted (with stanchion) or hand-held
  • Multiple configurations available
    • Light with 10′ cable (unfitted)
    • Light with 50-300′ cable, fitted with one of the following
  • Genuine Products – Manufactured by Western Technology

Note:  The Western Technology blast nozzle light is designed to last and is very durable.  Accidents or abuse may necessitate repairs however, and if a light needs repair, it must be conducted at BlastOne.  Cost to estimate repair is ½ Hour labor (refundable with completion of repair).  When a light is repairable, ballpark cost would be $750 due to the cost of the component assemblies.  Contact Customer Service at 1-800-999-1881 to coordinate inspection/repair of your lights.

Sponge-Jet® Sponge Blast Pots

Portable Sponge-Jet® feed units (aka Sponge Pots) come in a variety of configurations to suit almost every application.  From small, value-based units to fully featured machines, sponge feed units are designed for the ultimate in low-dust abrasive blasting. Seven configurations are available, as follows:

  • RASP Xtreme™ 3:
    • Highly portable & fits thru a 24 inch manway
    • Holds 1 bag of new sponge media (5-7 minutes)
    • Includes pressure relief valve (PRV) & integrated wheels
    • Great for spot work
    • 127 lb. empty weight
  • 100-HP Feed Unit™:
    • Great balance between size, cost & blast time
    • Fits through a 30″ doorway
    • Holds 3 bags of new sponge media
    • Includes PRV, secondary moisture separator & wheels
    • Great for preservation work
    • 480 lb. empty weight
  • CG Series (Contractor Grade Series):
    • 2 sizes available:
      • 170-CG – holds 5 bags of new sponge media
      • 470-CG – holds 13 bags of new sponge media
    • Value series – ideal where few features are required
    • Includes fork pockets
    • Great for yard work
    • 600 lb. / 1142 lb. empty weights for 170-CG / 470-CG
  • SJ Series (Feed Unit Series):
    • 2 sizes available:
      • 170-SJ – holds 5 bags of new sponge media
      • 170-EX – similar to 170-SJ, but ATEX 2 rated for potentially flammable environments
      • 470-SJ – holds 13 bags of new sponge media
    • Fully featured, includes:
      • Pressure relief valve
      • Secondary moisture separator
      • Muffler
      • Frame w/casters and lifting lugs
      • Centralized controls
    • Great for field work
    • 900 lb / 1000 lb / 1515 lb empty weights respectively

All new feed units come with choice of WEV or Saber nozzle.  We recommend the Saber nozzle due to it’s much higher value.  In addition, optional equipment such as the manifold/moisture separator, the vacuum drums, etc. are less costly if purchased when a feed unit is purchased.

Note:  Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website.  Contact us for fast, competitive pricing or send in the web-form quote request.

Pinovo PiCo Pipe Vacuum Blasting Workhead

  • Pinovo Pico is one of the most ingenious vacuum blasting discoveries in 10 years
  • Hand-held dustless external pipe blasting system.
  • Multiple different sized work-heads adapt to different sized pipe.
  • Works for 2″ – 8″ pipes
  • Genuine Parts – Manufactured by Pinovo in Norway
  • Minimal Availability in USA – Request a quote/express interest

Blast and Vacuum Workhead options

The workhead is the business end of a vacuum blaster.  Various versions are available for different applications, including the following:

  • Standard / BNV-3
  • Standard / BNV-5
  • Large with wheels / BNV-6
  • Right Angle
    • Designed to get into smaller areas

In addition to the above, the MiniBRS G2 Trigger Workheads are easier to handle than other versions. Features include the following:

  • Longer lasting brushes
  • More containment while blasting
  • Improved vacuum flow
  • Easier to slide head over surfaces while blasting
  • Available in either Electric or Pneumatic

For either series, various brushes can be mounted for different surface geometries, as follows:

  • Flat Surface
  • Inside Corner
  • Outside Corner

Temporary Modular Facility

  • Permanent or temporary mounting systems
  • Ideal for setting up temporary blasting/painting facilities
  • Supplied in modular kit for simple, quick installation (under a week)
  • Fully relocatable — easy to install and dismantle
  • 100% Waterproof design
  • Wind rating as per local requirements
  • No concrete foundation necessary
  • Compatible with optional abrasive recovery and dust collection equipment

US Minerals Black Diamond Coal Slag Abrasive

  • General Purpose abrasive used for Sandblasting
  • Angular shape creates a profile on steel
  • Mohs Hardness of 6-7
  • Bulk Density: 75-100 lbs/ft2
  • Less then 0.1% free silica
  • Not Recommended for blasting on stainless or aluminum
  • Comes in many different grades and packaging sizes
  • Non-Recycling
  • Meets SSPC-AB 1 Standard
  • Sold by the pallet (pallet minimum)
  • Abrasive cannot be ordered online at this time

SPACE INVADER Tight Space Blasting Kit

Effective solution for blasting in hard-to-reach areas such as:

  • Inside of bolt holes
  • Inside of close-fitting steel channels
  • Difficult access structural steel, such as bridge supports, etc.

Our Tite Space Invader kit:

  • Offers standard extension lengths from 10 to 60 inches, with other options available by special order.
  • Can be used with most abrasives
  • Attaches to blast hoses with standard 2-prong couplings (not nozzle holders)
  • Nozzle is NOT included and shown for illustration purposes only.  Requires junior size 3/8″ NPT threaded nozzles.  Choose the correct one for your application from our Tite-Space nozzle selection here.
  • Female version requires only ¾” clearance.
  • Male version requires only 1″ clearance.

Schmidt® 11cf Blast Machine, Dual Outlet

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

  • Unique!  Dual Outlet for 2 operators, in a short configuration for easy loading.
  • Only 46 inches tall!  Shorter than a standard 6.5 pot.
  • Capacity of 11 cu ft, which equates to 1600lbs of a dense media like premium GMA Garnet
  • Pressure Rating: 150psi
  • TeraValve pressure-hold metering valves

Sold as a Kit which Includes:

  • Blast Pot
  • Pneumatic Deadman Control System comes with 2 sets of 50 feet of control line and handle
  • Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field.

BLAST HOSE sold separately

Genuine Product – Manufactured by Schmidt® /Axxiom Manufacturing

Pinovo PiHab Dustless Blasting Enclosure

  • PiHab is a flexible abrasive blasting enclosure designed for easily adapting to pipes and beams etc….or any other structure that can be wrapped.
  • Creates a encapsulation anywhere on a jobsite, especially in a working pipe area
  • Kit comes with 5 PiHab bags, Viewing Window, Vaccum set up, Air input set up
  • Genuine Parts – Manufactured by Pinovo in Norway
  • Minimal Availability in USA – Request a quote/express interest

Clemco Power Blast Suction Blast Abrasive Blasting Gun

  • #1 Fastest Suction Blast System Available
  • Uses an Abrasive Pick-Up Tube and flexible Hose to mix abrasive with the airstream
  • To set up, simply slide the pick up tube into your bag of abrasive, connect your compressed air and pull the trigger
  • Comes with a fixed orifice ¼’ Airjet and ½’ Tungsten Carbide nozzle
  • Can be used with any media, right out of the bag
  • Ideal for where air supply is limited or for small jobs where setting up conventional pressure blast machine is a nuisance
  • Uses between 40-120 cfm of air – the more you have, the faster you blast.
  • Sold as a Kit including the gun, nozzle and pick up tubes
  • Also referred to as a bag blaster
  • Genuine Product – Manufactured by Clemco

Schmidt BAABS Trigger Rail Deadman System

The latest innovation in deadman safety technology from Axxiom – the BAABS (Blasting Accessories and Assist Bracket System). Intended to be the safest deadman on the market, it mechanically prevents inadvertent activation. Configurable as follows:

  • Available sizes
    • Subcompact.  Shortest version, intended for use in extremely tight spaces, blasting nooks & crannies, etc.
    • Compact.  Designed for general purpose blasting, it is capable of being used in all but the tightest of spaces. This model BAABS is now standard in all new Axxiom Schmidt blast equipment except the 0.9CF Mini Blaster and all BRS units.
    • Short Rail.  Also designed for general purpose blasting, the Short-rail BAABS is the middle-size unit.
    • Long Rail.  Ideal for large, flat wall areas and allows the operator to step back from the surface.
    • 2XL.  The longest BAABS of all!  Virtually eliminates the back-breaking task of bending over to blast tank floors.
  • Switch options.  All BAABS use a G3 trigger deadman with the option of either electric or pneumatic operation.

All BAABS units are capable of being fitted with the BAABS blast light subassembly for improved vision in dim or dusty environments.(Note:  When the light is used with the Subcompact BAABS, there is not room for the thrust brace.)

360° Internal Pipe Blasting Nozzle

Offers Quick and Easy Setup for blast cleaning on internals of small pipes

  • Blasts in a 360 degree pattern
  • Can be used in pipes from 2.5 to 5 inch ID
  • Machined aluminum jacket with tungsten carbide liner
  • Replaceable tungsten carbide deflector tip
  • Coarse, 2″ Contractor Thread
  • Screws directly into nozzle holder
  • NOTE – requires Nylon nozzle holder with contractor threads

Screws for Blast Hose Couplings and Nozzle Holders

  • For attaching couplers and nozzle holders to blast hoses
  • Used in conjunction with a small amount of silicon to install couplings
  • Domehead or Countersunk
  • SEE Screw Selection CHART in Additional Information below for proper sizing
  • Sold in packs of 200

Pinovo PiWalk Blast and Vacuum Workhead

  • Walk-behind vacuum blasting head
  • Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
  • Nozzle size: No.6 (⅜”)
  • Blasting rate: up to 64 ft²/6 m² per hour.
  • Compressed air requirement: 500 cfm.
  • Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
  • Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
  • Noise level: 89 dB at 1m distance.
  • Mounted with Wheels, making it easy to maneuver
  • Has replaceable rubber lining and brushes.
  • Genuine Parts – Manufactured by Pinovo in Norway

Limited availability in the USA – Request a quote/express interest.

160 CF Mega MistBlaster Blast Machine, 4-Outlet

Our latest generation Mega MistBlaster offers both wet and dry blasting for the ultimate in flexibility!  It reduces costs and time when doing large projects and offers the following:

  • Versatility.  4 functions available at the flip of a switch:
    • MistBlasting / Wet (slurry) Blasting
    • Traditional Dry Blasting
    • Wash-down mode
    • Blow-off mode
    • Each outlet is independently controlled, giving even greater versatility.
  • Capability.  With its 4 outlets, this workhorse can power up to 4 operators OR a VertiDrive robotic blaster and manual blasting simultaneously.
  • Huge capacity – As typically configured with 160 cubic feet (aka 8 Ton), this bulk pot holds half a truckload of garnet.
  • Mount Options as follows:
    • Highway Trailer
    • Skid Mount
    • Shipping Legs (for mounting on your own equipment)
  • Available Cost Saving Option – We can convert your existing Schmidt® Dry bulk pot with to our Mega MistBlaster with our retrofit package. Available as a Limited version (without metering / air valves, for new pots) or as a Full version (with all valves, for used pots).

More options and features shown under the description tab. Available for Purchase or Rental. Ask about a demo! Note: Designed for use with a 1600 CFM dryer, available here.

Pinovo PiConnect Blast and Vacuum Workhead

  • A lightweight closed-circuit vacuum blaster with interchangeable heads.
  • Edge blasting tools.
  • Nozzle size: No.6 (⅜”)
  • Blasting rate: up to 27 ft²/2.5 m² per hour.
  • Compressed air requirement: 320 cfm.
  • Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
  • Genuine Parts – Manufactured by Pinovo in Norway.
  • Limited availability in the USA – Request a quote/express interest.

Hose Gripper Adapter set for BAABS Deadman System

The BAABS deadman assembly works on all sizes of blast hose.  To facilitate the various hose diameters, a hose adapter set is required.  Each adapter set includes 2 grippers (2 sets are used per BAABS) and is offered in the following sizes:

  • M1, for HE1 nozzle holder (1″ whip OR 3/4″ 4-ply hose)
  • M2, for HE2 nozzle holder (1-1/4″ whip OR 1″ 4-ply hose)
  • M3, for HE3 nozzle holder (1-1/2″ whip OR 1-1/4″ 4-ply hose)
  • M4, for HE4 nozzle holder (1-1/2″ 4-ply hose)

NOTE – set sizes M2, M3, and M4 are INCLUDED with each BAABS system purchase.  Size M1 available at additional cost.

Nozzle Thread Adaptors

Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type.

Boron Carbide is the longest life version, but not available in all configurations.  Polyurethane, steel, aluminum, etc. are also available and are lower in cost.

  • Available configurations:
    • Contractor (2″ / 50mm) Thread Nozzle Holders to:
      • ¾” (20mm) Medium Thread nozzles
      • 1-¼” (32mm) Fine Thread nozzles
      • Flange nozzles
    • Fine (1-¼” / 32mm) Thread Nozzle Holders to:
      • ¾” (20mm) Medium Thread nozzles
      • 2″ / 50mm Contractor thread nozzles.  This is a BlastOne Exclusive!

Inlet Airline Moisture Separator

The Inlet Airline Moisture Separator, designed specifically for abrasive blasting, provides final stage moisture droplet removal before air enters the blast machine, ensuring minimal pressure loss for peak blasting productivity. Utilizing an elementless design with a tangential flow, and an internal stainless steel coalescer, it handles large air volumes without efficiency loss. This system can be sized at 250cfm or 400cfm based on your blast nozzle and compressor size, and though it requires separate order of inlet fitting or ball valve, it promises improved blasting performance with drier air.

  • Installed at blast machine inlet for final stage moisture droplet removal before air enters blast machine
  • Tangential flow and elementless design
  • Minimal pressure loss for peak blasting productivity
  • Requires 1/4′ ball valve for drainage – part no. FVBL006
  • Optional autodrain accessory available
  • Male threaded inlet and outlet ports
  • Inlet fitting or ball valve not supplied – order separately
  • Specify Size – 250cfm or 400cfm, based on the size of your blast nozzle and compressor
  • Includes internal stainless steel coalescer

ATA Series Angle Blast Nozzle

Sized between the Tite Space and the full size nozzles, the ATA series of angle nozzles come standard with ¾” Medium Threads. They are excellent for applications requiring the operator to operate in small areas, especially when paired with a small bore whip-hose. Basic specs are:

  • 3/4″ (20mm) Medium male thread (other options available by special order).  Can be used in standard Fine or Coarse nozzle holders by use of a thread adapter available here.
  • 1/2″ (13mm) throat entry
  • 45° forward, 90° right angle, and 135° reverse blast pattern options available
  • Some sizes are available in Double, Triple or Quad orifices
    • Note:  Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly
  • Tungsten carbide liner.  Extended life liners for large projects available by special order.
  • Short 2-1/8″ length

Contact us for additional options available by special order.

VertiDrive M7 Blasting Robot

RENT or PURCHASE this surface preparation work-horse!

The original M7 VertiDrive.  Bringing improved production to large blasting projects.

  • Faster Production.  Holds 2 nozzles simultaneously and each nozzle is up to 30% faster than the best hand blasting.
  • Cleaner Surface.  Provides consistent blasting quality by adjusting equipment speed to the specific surface needs.
  • Safer.  Remote control operation removes the operator from harms way.
  • Capable.  Blast both horizontal and vertical surfaces with ease.
  • Versatile.  The M7 can be configured in 3 ways:
    • Abrasive Blasting.  Can blast either wet or dry.
    • Power Wash surface cleaning
    • Ultra High Pressure (UHP) coating removal.

Note:  we recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) with at least 10,000 square feet to recognize cost savings.  Not all medias can be used with the VertiDrive.

Can be used with existing blast equipment, or BlastOne can provide. Purchase pricing is typically between $125,000 and $204,000, depending on configuration.

 

BlastOne offers on-site training to help maximize your investment.  Contact us to discuss your specific project and estimate the ROI by using a VertiDrive.

AT Series Short Blast Nozzles

  • 3/4″ NPSM (20mm) ‘M’ Medium thread
  • 1/2″ (13mm) throat entry
  • Tungsten carbide liner
  • Aluminum jacket and thread
  • Very short – 1-5/8″ long
  • Commonly used with Internal Pipe RotorBlast when blasting pipes between 8 and 11 inches in diameter, or in other hard-to-reach blasting areas
  • Uses HFGFBSP nozzle washers (not included) – order separately

SQUARE-SHOOTER Tungsten Carbide Blast Nozzle

  • 2″ UNC (50mm) coarse Contractor thread ‘C’ or 1 1/4″ NPSM (32mm) Fine Industrial thread ‘F’
  • Square thorat entry, venturi
  • Tungsten carbide liner
  • Urethane jacket, brass thread
  • Large square blast pattern – less overlap when blasting
  • Alignment ridges on jacket

Schmidt® Mitey-Mite 0.9 CUFT Blast Machine

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

  • Smallest production style pot available
  • The 0.9 cuft capacity will hold 140 lbs of Garnet
  • Ideal for in-plant or onsite touch up work
  • Comes with Schmidt TeraValve™ Metering Valve
  • Unit includes 25′ blast hose with trigger deadman, 1/8″ nozzle and twinline
  • Comes with moisture trap
  • 3/4″ Piping

Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

For rental or purchase

Harsco Black Beauty Copper Slag Abrasive

  • Black Beauty Iron Copper Slag is a high-density slag abrasive for sand blasting
  • Less then 0.1% free silica
  • Mohs Hardness of 6-7
  • Bulk Density: 100-120 lbs/ft2
  • Not Recommended for blasting on stainless or aluminum
  • Comes in many different grades and packaging sizes
  • Non-Recycling
  • Passes 40CFR 261.24a (TCLP)
  • Passes SSPC AB-1
  • Sold by the pallet (pallet minimum)
  • Abrasive cannot be ordered online at this time

US Minerals Black Diamond Copper Slag Abrasive

  • Copper Slag AKA Iron Silicate abrasive used for Sandblasting
  • Angular shape creates a profile on steel
  • Mohs Hardness of 7
  • Bulk Density: 100-120 lbs/ft2
  • Less then 0.1% free silica
  • Not Recommended for blasting on stainless or aluminum
  • Comes in many different grades and packaging sizes
  • Non-Recycling
  • Meets SSPC-AB 1 Standard
  • Sold by the pallet (pallet minimum)
  • Abrasive cannot be ordered online at this time

Harsco Black Beauty Coal Slag Abrasive

  • Multi-Purpose abrasive used for Sandblasting a variety of substrates, especially steel and concrete.
  • Angular particle shape creates a profile on steel, with only minimal embedment into the surface.
  • Mohs Hardness of 6-7
  • Bulk Density: 75-100 lbs/ft2
  • Less then 0.1% free silica
  • Not Recommended for blasting on stainless or aluminum
  • Comes in many different grades and packaging sizes
  • Non-Recycling
  • QPL Approved and MIL Spec approved abrasives available from select plants
  • SSPC AB-1 Approved
  • Sold by the pallet (pallet minimum)
  • Abrasive cannot be ordered online at this time

Response Pneumatic Deadman Service Kit

Ensure the smooth operation of your Pneumatic Response Deadman Handle with the “Response Deadman Service Kit” (SKU: DM226300299). This complete kit features genuine parts by Schmidt/Axxiom Manufacturing for efficient in-field repairs.

  • Suits Pneumatic Response Deadman Handle
  • Complete Service Kit to enable in-field repair of Deadman Handle
  • Sold as a Kit including;
    • Shuttle Valve
    • Spring
    • Replacement Plug
  • Genuine Parts – Manufactured by Schmidt / Axxiom  Manufacturing

Lid and Screen Set for Blast Machines and Pots

Abrasive blasting hopper lid and mesh screen

    • Lid and Screen Set designed to suit blast pots
    • Hole size 1/8 (3 mm)
    • Screen sieves foreign matter out of the abrasive
    • Lid keeps moisture, rain, dew, etc out of the blast machine
    • Select the size to suit diameter of your blast pot 12″ 18″ 24″
    • Fit most portable blast machines, made by Schmidt abrasive blasting, Axxiom Manufacturing, Clemco

 

Pinovo PiPoint Mini Blast and Vacuum Workhead

  • The PiPoint is the smallest hand-held vacuum blasting tool.
  • Has 8 interchangeable heads providing flexibility for different job requirements.
  • Allows you to blast inside a small box web beam, etc.
  • Nozzle size: No.6 (⅜”)
  • Blasting rate: up to 6 ft²/0.6 m² per hour.
  • Compressed air requirement: 250 cfm.
  • Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
  • Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
  • Noise level: 89 dB at 1m distance.
  • Genuine Parts – Manufactured by Pinovo in Norway

Limited availability in the USA – Request a quote/express interest.

AAM Angle Blast Nozzle, Tungsten Carbide

  • Ideal for blasting recesses, pipe internals, behind angles, lattices etc.
  • 2″ UNC (50mm) coarse Contractor thread ‘C’ or 1 1/4″ NPSM (32mm) Fine Industrial thread ‘F’
  • 3/4″ (20mm) throat entry
  • 45° single, double or triple (equi-spaced) side outlets
  • Tungsten carbide liner
  • **Triple orifice nozzles have triple air & abrasive consumption!

Brite-Blast Halogen Blast Light 12V

  • BABL3070 / BABL3070L – an economical Blast Light option
  • Typically mounted directly behind the blast nozzle to give the blasting operator light where he is blasting.
  • Comes with 10ft bare cable, order a Electrical connector separately
  • Low voltage 12 volt operation for operator safety
  • Uses 20W Halogen light bulb

Fitted Blast Hose – with Nozzle Holder

  • Premium blast hose fitted with couplings and nozzle holder
  • We have many ways to fit a blast hose
  • For a Whip hose we recommend you use 2Ply type
  • Most common composition is Aluminum Coupling with Contractor Thread Nylon Nozzle holder
  • Fitted and Quality Controlled by BlastOne Trained Staff

Blast Hose Quick Coupling QC Fittings

  • 2-claw Blast Hose QC Quick couplings
  • Available in Brass, Aluminum, Steel and Nylon
  • 2 types available – Standard and MegaMax.
    • NOTE:  MegaMax and Standard couplings require an adapter to fit together
  • MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings and increases the PSI available to the nozzle.  The increased PSI is mostly beneficial when doing high-production blasting using 1.5″ or 2″ ID Blast Hoses.
  • These are unthreaded couplings designed for blast hoses only. Threaded QC fittings are used on the metering valve outlet, and can be found HERE.
  • Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6

Mist Blaster® Wet/Dry 6.5CF Blast Machine Options

Updated and enhanced! BlastOne has refreshed its highly successful MistBlaster® and has released the latest generation with even more capability!

What HAS NOT changed:

  • Industry-Leading Flexibility. 
    • The MistBlaster® is a true dry blaster with the added capability of being the best wet blaster on the market. It is not a limited-purpose dustless / slurry blaster that will sit around gathering dust most days.
  • Water and Abrasive flow is separately adjustable. Maximizes production while keeping cleanup to a minimum.
  • Reliable design.  Uses the latest generation TeraValve® metering valve on the popular 6.5CF pot chassis.
  • Abrasive choice.  Will work with most abrasives in dry mode. In wet mode, garnet or crushed glass are recommended.

What HAS changed:

  • Enhanced functionality. 4 functions are built into the control panel (Dry Blast, Wet Blast, Wash Down, and now Blow Down)
  • Controls flexibility.  The dual deadman control system is now set up to operate either electrically or pneumatically.
  • High-Flow piping.  Air pressure regulator has been deleted and piping has been upgraded to increase nozzle pressure.

All 6.5 c.f. MistBlasters include the following as standard:

  • Single outlet TeraValve® abrasive metering valve
  • Dual electric / pneumatic controls, including deadman handle and control line
  • Industrial-strength Schmidt® VBS II Muffler

Configuration Options:

  • Wheel version – Stand-alone unit, portable configuration
  • Skid version – Stand-alone unit, mounted on a steel skid.
  • Combo Skid versions, save setup time and storage space. Available in the following configurations:
    • Combo Skid 400 cfm Dryer Options as follows: 
      • Deliquescent type (4-season / highest efficiency)
      • Aftercooler Squat type (3-season / less effective in cooler temperatures)
      • No Dryer
      • Note: Unlike dedicated slurry-type blasters, the MistBlaster is designed around a standard dry vessel.  A stand-alone air dryer is required in order to realize a full return on your investment.
    • Combo Skid Mounting Options as follows: 
      • Steel Skid
      • Steel Skid with Frame
    • Combo Skid Breathing Air Packages as follows: 
      • With Breathing Air Station (breathing air filter, carbon monoxide alarm, and 50′ breathing air line)
      • Without Breathing Air Station
    • Note:  All Combo Skid configurations include an Air Manifold with spare air ports and a 50-gallon tank.
  • Retrofit version:  Save money by retrofitting your existing 6.5 pot (must be structurally sound).  Available in wheel or skid configurations and includes all standard MistBlaster features.

Available for Purchase or Rental. Ask about a demo!

Additional details shown under the description tab.

Water Ring – Blast Nozzle Attachment

  • Water ring creates a dust suppression “curtain” around blast pattern.
  • Basic wet blasting option.
  • Attach to a standard garden hose, has a flow regulator to give some control over water volume
  • Does use a large amount of water. For larger projects, consider using a MistBlaster to reduce cleanup.
  • Does not include the nozzle. Will fit the Ultra nozzle, the TVP tungsten carbide nozzle, but does not fit the Hyper nozzle.

Chronital Stainless Steel Shot – Blasting Media

Stainless Steel Shot

  • Manufactured chronital stainless steel shot abrasive
  • Can be recycled many times
  • Stainless Steel Abrasives are also used in applications where there can be no ferrous contamination
  • Used mainly in an air-blast application to create a specific desired finish or where a non-ferrous abrasive is required
  • Sharp edges gradually round over as it wears
  • Packed in 25kg bags
  • Made by Vulkan Shot
  • Grittal Stainless Steel Grit also available

Various Graco EcoQuip Blast Hoses and Nozzles

GRACO® SPECIAL PURCHASE – ECOQUIP FINAL CLEARANCE!

These hoses and nozzles are top quality new condition, and work on all abrasive blasting equipment (not just EcoQuip).

These special-purchase products include the following:

  • EcoQuip “Replacement” blast hose assemblies, which include coupling / nozzle holder, control line, and a Schmidt® Response deadman handle, in both pneumatic and electric.
  • EcoQuip “Extension” blast hose assemblies, which include couplings and control line, in both pneumatic and electric.
  • EcoQuip “Bulk Hose”, 50′ sections of blast hose, without any accessories
  • Graco blast nozzles in the following types:
    • Standard (contractor thread)
    • Hyper (contractor thread)
    • SST (medium thread)
    • Double Venturi (contractor thread)

Note:  The hose assemblies with electric control cable come in both mini and standard connections – see the product descriptions.

This special close-out purchase is limited to stock on hand and will be available on a first-come, first-served basis until they are gone. Pricing shown is the Graco® MSRP.  (See our promotion page for current special offers.)

Megaflow Bull Air Hose – Fitted Lengths

AVAILABLE FOR RENTAL OR PURCHASE

  • MegaFlow heavy duty air supply bull hose
  • Fitted with your choice of industrial fittings
  • Fitted by Trained and Certified BlastOne Technicians
  • Rated to 300psi with 3:1 safety factor
  • Always use with safety whipchecks

Blast Light Stanchion for 3475 LED Blast Light

  • Suits BABL3475 LED Blast Light
  • Blast Light holder (Stanchion) for mounting onto your blast hose
  • Install the light directly behind you blast nozzle, to give you blasters proper visibility – no more braille blasting.
  • Comes with Hose Clamp
  • Sold Individually
  • Genuine Part – Manufactured by Western Technology

RotorBlast Tungsten Carbide Nozzles

These medium thread nozzles have a longer venturi than the BNAT nozzle series, making them ideal for use in our RotorBlast internal pipe blaster (when blasting pipe 12″ in diamater or greater).  Available in multiple orifice sizes.  When using them in pairs (like when using in the RotorBlast), be sure to calculate your compressor CFM size requirement accordingly.

Schmidt Thompson® I Valve – Abrasive Metering Valve

The Thompson I Valve was invented by Bob Schmidt and was instrumental in causing the popularity of pressure hold technology.

  • Pressure-hold systems retain the pressure in the blast pot until the deadman handle is depressed.  This reduces abrasive and energy waste.
  • The Thompson I offers fine control for abrasive metering
  • It comes in 3 nipple size configurations:
    • 1 ¼” (32 mm) x 1 ¼” (32 mm)
    • 1 ½” (38 mm) x 1 ½” (38 mm)
    • 2″ (50 mm) x 2″ (50 mm)
  • Threaded-plunger metering design with air actuated operation
  • Fits most sand blast hoppers, blast pots or abrasive blasting machines
  • Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

Note:  The Thompson I valve, while still available, has become less common. The more modern Thompson II valve or state-of-the-art TeraValve are more popular and can replace the Thompson I without any modifications.

Chicago 2-Lug Air Supply Couplings

  • 30 Day Money Back Guarantee  |  Free Returns
  • Industry standard coupling for use with air supply hose
  • Rugged steel construction
  • Quarter-turn quick action connector
  • Supplied with 3/4″ I.D. bore gaskets fitted
  • Use HF CLP-1 or HF CLP-2 Lock Pin – (not included)
  • Available with hose tail, male threads, or female threads
  • Sold individually

Threaded Blast Quick Couplings

  • 2-claw threaded coupling for metering valve outlet, to enable connection of blast hose
  • Supplied with HFGMRLP coupling gasket fitted
  • For Aluminum, Brass, and Steel,  use HFCLP1 thin safety lock pins – purchase separately
  • Nylon is supplied with HFGPCG gasket fitted and contains an integral springlock pin
  • 2 types available – Standard and MegaMax.
    • Note: MegaMax and Standard couplings require an adapter to fit together.
  • MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings, and increases the PSI available to the nozzle.  The increased PSI is mostly beneficial when doing high-production blasting using 1.5″ or 2″ ID Blast Hoses.
  • These are threaded couplings designed for metering valve outlets only.  Unthreaded QC couplings are used on blast hoses, and can be found HERE.
  • Note:  1 1/4″ threaded couplings can also be used as Quick-couple type nozzle holders for fine thread nozzles.
  • Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2

IBIX 6 Easy Blaster

FOR RENTAL OR PURCHASE

      • FREE Shipping
      • 30 Day Money-Back Guarantee | Free Returns
      • The IBIX 6 Blaster is a portable abrasive blasting system.
      • Very light – Empty Weight is only 27lbs
      • Ideal for touch-up and maintenance work.
      • It’s portability makes blasting in difficult access areas possible.
      • Sold as a Kit with a 25′ hose and application gun 1/8″ nozzle.
      • Genuine Parts – Manufactured by IBIX

IBIX 25 Portable Blaster

      • FREE Shipping
      • 30 Day Money-Back Guarantee | Free Returns
      • IBIX Blaster is made from a 100% aluminum lightweight body
      • One of the most versatile and portable blasting units available
      • Weight Empty: 99 lbs.
      • Will run effectively off a 3/4″ air supply line
      • Capacity to hold 1 small bag of garnet – about 60 lbs.
      • Comes with 25ft of blast hose and blast gun
      • Genuine Parts – Manufactured by IBIX

Sullair 375 cfm Diesel Air Compressor

AVAILABLE FOR RENTAL OR PURCHASE

  • 375 cfm Compressor is suitable for 1 blaster
  • PSI Range between 125-150psi
  • Each compressor brand is different, so please request a quote.
  • The 375 cfm air compressor is used extensively in the corrosion control industry. Excellent mobility and easily maintained.
  • BlastOne sells both re-manufactured Tier 3 units and the most up to date Tier 4 units.

MegaFlow Bull Air Hose – Unfitted

  • MegaFlow heavy duty air supply bull hose
  • Used to supply the large volume of air required for sandblasting
  • Made from high-quality rubber compounds that are oil resistant
  • Tough, UV resistant outer cover resists breakdown from sunlight
  • Nylon braiding to make it more flexible and easier to man-handle
  • Rated to 300psi with 3:1 safety factor
  • Fitted Bull Air Hoses also available

Schmidt Thompson® Metering Valve II XL™ – Extended Life

  • Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
  • Designed to handle the harshest blasting environments known
  • Will handle up to a 3/4″ blast nozzle
  • Will work with any abrasive, including very fine/dusty abrasives
  • Most rugged and reliable valve for any application
  • Sold Individually
  • Genuine Parts – Made in USA by Schmidt / Axxiom Manufacturing

SUPERSONIC TC Blast Nozzle 3/16″ (4.8 mm) Orifice

  • 2″ UNC (50 mm) coarse Contractor thread
  • 1 1/4″ (32 mm) wide throat entry, long venturi
  • Tungsten carbide liner
  • ‘The Original’ Contractor favorite
  • Standard weight aluminum jacket and thread
  • Use HF G32P nozzle washes (not included – order separately)

Schmidt® ASAP Electric Remote Control System

  • ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
  • This System changes the depressurization flow of the air in the blast hose
  • Allows a 200ft blast hose to depressurize in less than 1 second
  • Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
  • Saves Seconds – Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
  • Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
  • Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

Replacement Rotating Head for Spinblast / RotorBlast

  • IPC1002 RB-1 Replacement Rotating Head
  • For IPC1000 RotorBlast
  • Note:  This item is also included in Spare Parts Kit, IPC1099
  • Note:  This item does not include nozzles.  See part IPC1000 for nozzle recommendations.

Schmidt Thompson Valve 2 Urethane Seat

  • OEM Urethane Seat suit Thompson Valve 2
  • Used with the Tungsten Carbide Sleeve (The most common)
  • One of the main signs of wear is air leaking out of the nozzle when you’re not blasting but the pot is pressurized
  • Schmidt / Axxiom part # 2152-000-10

Air Actuated Valve for Water Flow on MistBlaster

  • Suits MistBlaster
  • Used to control the water flow to the nozzle, via the injector block
  • Air Actuated 2-Way Valve
  • SS T-Port Ball Valve 1/2″, Spring Return
  • Mist Blaster requires 2 Valves
  • Sold Individually

ConeBlast Junior with 1 1/4″ Stepdown Tungsten Reducer

  • Easy setup
  • Tungsten carbide deflection head and throat nozzle
  • For pipes 3/4″ to 2″ ID
  • Includes ‘hex collar’ centering carriage set
  • Requires 120 CFM air supply
  • Adapts to customer supplied length of 3/8″ threaded lance
  • Compatible with standard blast machines

Note:  This product is similar to the Clemco Hollo-Blast Jr.

Gaskets for Nylon Couplings

  • For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
  • Material: Double-lipped rubber
  • Compatibility:
    • PCG-1: 3/4″ ID and Smaller Blast Hose
    • PCG-2: 1″ ID Blast Hose
    • PCG-3: 1-1/4″ ID and Larger Blast Hose
  • Sold as a pack of 10

RGN Pneumatic Remote Control Deadman Handle

  • Conventional bleeder-type deadman control handle
  • 1/4″ (6mm) (supply) x 1/8″ (3mm) (return) threaded connectors
  • Large lever design
  • Use only with equipment designed for bleeder-style handles – DO NOT use with Combo or Thompson Valves

Pneumatic Remote Abrasive Cut-off Retrofit Kit

  • Pneumatic Complete Retrofit kit includes:
  • Triple-line coupled remote control hose
  • Control hose connections for air supply
  • Auto air valve and Thompson Valve II metering valve
  • Pneumatic push-pull abrasive on-off switch
  • Response deadman handle

Velocity™ System

Technology insertion to exponentially increase shipyard blast and coat production.

COMPONENTS & FEATURES

The individual technologies include, but are not limited to:

  • Intelliblast Blast Pot Controls:
    • Smart controls that optimize blasting parameters for maximum efficiency and effectiveness.
  • Snakebite Blasting Nozzles
    • High-performance nozzles designed for precise and powerful material removal, reducing blasting time and lowering process noise.
  • Rapidly Deployable Containments
    • Innovative containment systems that can be quickly deployed, ensuring a controlled environment, and minimizing the spread of contaminants.
  • Vortex Airflow Movement
    • Proprietary airflow design that lowers energy consumption, enhances ventilation, and ensures the efficient removal of particles from the blasting and painting areas.
  • Combination Dual Air Plenums
    • Dual air plenums that provide a uniform and controlled airflow, optimizing the blasting and painting processes.
  • Energy Recovery System (ERS)
    • An energy recovery system that captures and recycles heat energy, reducing overall energy consumption and operational costs
  • Robot Ready Design
    • A structure and system that is designed to be capable of supporting automated process equipment

BENEFITS 

  • Faster production cycles
  • Reduced operational costs
  • Enhanced environmental sustainability
  • Improved worker safety

Informational Content

View All
Add to quote:

Registration is required to create a Quote.

Click Here to Login or Register.

Add to existing quote:

Add to Quote

Add to a new quote:

Send the request

BlastOne says
Thank you for submitting your quote. A sales representative will follow up with you asap.
Share Quote via Email

Share