My Account
Face Masks & Filters
Face Masks
Face Mask Filters
Disposable Coveralls
Painting / Gloves
Head Socks
Showing 1–15 of 18 results
-
From the makers of the Nova Respirators!- GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 10 per case, with case discount
- Multiple filter versions available as follows:
- Standard P100. These filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns.
- Standard P100 Starter Kit. Same as above along with a hard carry case and extra set of filters included.
- Enhanced P100 w/activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- Standard P100 Source Control. Designed for healthcare market and reduces cost and waste as compared to N95 disposable masks. Side exhaust valves removed.
- Reuse your respirator over and over again with the low-profile line of GVS replacement filters.
- NIOSH Approved TC-84A-8062.
NOTE - This is the low-profile series. Standard-profile Elipse Masks (which offers Acid Gas & Multi-Gas filter options) are also available.
As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.
-
From the makers of the Nova Respirators!- GVS Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 5 per case, with case discount.
- Multiple filter versions available as follows:
- Standard P100
- Enhanced P100 w/Nuisance Odor control
- OV / P100 - P100 Organic Vapor protection. Painters favorite!
- Reuse your respirator by using the low-profile line of GVS replacement filters, which include a pre-filter option which extends the life of the OV / P100 filter.
- NIOSH Approved goggles provide ANSI Z87+ eye protection.
- Goggles are scratch and fog resistant. Tear-off lenses available separately to keep them clean while spraying
-
Replacement filter cartridges to suit GVS Elipse and Integra Standard-Profile half-masks.
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- OV / P100. Protects against organic gases and particulates.
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases.
- Multi-Gas P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
-
Replacement filter cartridges to suit GVS Elipse and Integra Low-Profile half masks.
- Standard P100. These filters will remove up to 99.97% of particles and contaminants down to 0.3 microns.
- Enhanced P100 w/ activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Protects against organic vapors and particulates.
- Prefilters. Optional filters designed to extend the life of the OV filter. Requires filter holder kit as shown.
-
- #1 mask used by painters in USA
- Comfortable, lightweight and durable mask.
- Low Breathing resistance
- Filters available for gas and particulate protection.
- Genuine Parts - Manufactured by 3M Safety
-
NK98886
- Tinted Full Face Lens Cover
- Protects the full face mask AND protects eyes from sunlight or other standard bright lights.
- (NOT for use for welding or other applications that require reduction of UV or IR radiation beyond the capability of normal sunglasses)
- Use with 3M 6000 Series Full Facepiece Respirators
- Pack of 25
- Genuine 3M product
NK98886- Tinted Full Face Lens Cover
- Protects the full face mask AND protects eyes from sunlight or other standard bright lights.
- (NOT for use for welding or other applications that require reduction of UV or IR radiation beyond the capability of normal sunglasses)
- Use with 3M 6000 Series Full Facepiece Respirators
- Pack of 25
- Genuine 3M product
-
- Durable silicone face seal provides flush, supple wearability and extends product life
- Cool Flow Valve allows for effortless breathing, heat reduction and moisture accumulation
- Standard and/or drop-down modes are made simple by adjustable dual-mode head harness
- Hard hat, weld/face shields are not a barrier with the 7585F fabric head cradle option
- NIOSH approved
-
NKN31000GVS offers a N99 disposable mask - more effective against airborne contaminants than a N95. These masks (aka filtering facepieces):
- Are Made in USA!
- Are individually polybagged, then packed in boxes of 15.
- Remove up to 99% of particulates down to 0.3 microns
- Have 99.9% bacterial filtration efficiency
- Have vertical folded design with an adjustable nose clip
- Come with 2 buckles w/4-point adjustable straps
- Are latex free and have a comfort seal
- Are designed for Healthcare and Pharmaceutical applications to protect against particulates and airborne hazards.
- Priced per pack of 15 with case discounts available
- Have full NIOSH 84A-9111 approval
NKN31000GVS offers a N99 disposable mask - more effective against airborne contaminants than a N95. These masks (aka filtering facepieces):- Are Made in USA!
- Are individually polybagged, then packed in boxes of 15.
- Remove up to 99% of particulates down to 0.3 microns
- Have 99.9% bacterial filtration efficiency
- Have vertical folded design with an adjustable nose clip
- Come with 2 buckles w/4-point adjustable straps
- Are latex free and have a comfort seal
- Are designed for Healthcare and Pharmaceutical applications to protect against particulates and airborne hazards.
- Priced per pack of 15 with case discounts available
- Have full NIOSH 84A-9111 approval
-
NK56001CASE
- Suits 3M Half and Full Face Masks
- NIOSH Rated Organic Vapor Filter Cartridge
- Sold as a box of 60 filters (30 pairs)
- 3M Part number 6001
- Genuine Parts - Manufactured by 3M
NK56001CASE- Suits 3M Half and Full Face Masks
- NIOSH Rated Organic Vapor Filter Cartridge
- Sold as a box of 60 filters (30 pairs)
- 3M Part number 6001
- Genuine Parts - Manufactured by 3M
Part Number Purchase Price NK56001CASE $517.08 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$517.08
-
-
NKSPM414
- Suit GVS Elipse and Elipse Integra Masks
- Simple tube adapters to do fit tests
- Portacount Quantitative Fit Test Adapter
- Priced per each. Case quantity is 10.
- Manufactured by GVS
NKSPM414- Suit GVS Elipse and Elipse Integra Masks
- Simple tube adapters to do fit tests
- Portacount Quantitative Fit Test Adapter
- Priced per each. Case quantity is 10.
- Manufactured by GVS
-
NK5N11-US
- NIOSH certified
- Rated to N95 specification
- Offers protection against non-oil containing aerosols
- For use on 3M 5000 Series respirators and 6000 Series cartridges with 501 filter retainer
- Can be used with half mask and full face respirators
- Genuine 3M replacement part
- Case qty 100
NK5N11-US- NIOSH certified
- Rated to N95 specification
- Offers protection against non-oil containing aerosols
- For use on 3M 5000 Series respirators and 6000 Series cartridges with 501 filter retainer
- Can be used with half mask and full face respirators
- Genuine 3M replacement part
- Case qty 100
-
NK58501
- For holding 3M particulate filters
- Holds 5N11 (N95) filter & 5P71 pre-filter (sold separately)
- Works with 3M 5000 Respirator Series, 3M 6000 Cartridge Series, and 3M Filter Adapter 603
- Genuine 3M replacement part
- Retainer only
NK58501- For holding 3M particulate filters
- Holds 5N11 (N95) filter & 5P71 pre-filter (sold separately)
- Works with 3M 5000 Respirator Series, 3M 6000 Cartridge Series, and 3M Filter Adapter 603
- Genuine 3M replacement part
- Retainer only
-
NKADA502
- Suits 3M Half and Full Face Masks
- Used to attach the 6000 series filters with bayonet style fittings to 3m Gas/Vapor respirators and cartridges
- Sold Individually - each mask requires 2 adaptors
- 3M Part number 502 Adaptor
- Genuine Parts - Manufactured by 3M
NKADA502- Suits 3M Half and Full Face Masks
- Used to attach the 6000 series filters with bayonet style fittings to 3m Gas/Vapor respirators and cartridges
- Sold Individually - each mask requires 2 adaptors
- 3M Part number 502 Adaptor
- Genuine Parts - Manufactured by 3M
-
NK5P7110
- NIOSH approved for environments containing certain non-oil based contaminants
- Suits 3M™ 5000 Series Respirators or 6000 Series gas and vapor cartridges with 3M™ 501 Retainer
- Can use with half mask and full-face respirators
- Requires pre-filter retainer (NK58501)
- Use in conjunction with 3M particulate cartridge filters only
- Pack of 10
NK5P7110- NIOSH approved for environments containing certain non-oil based contaminants
- Suits 3M™ 5000 Series Respirators or 6000 Series gas and vapor cartridges with 3M™ 501 Retainer
- Can use with half mask and full-face respirators
- Requires pre-filter retainer (NK58501)
- Use in conjunction with 3M particulate cartridge filters only
- Pack of 10
-
- Hard Carry Case for Elipse and Integra Face Masks
- Extend the capability of your protection with the best range of accessories
- Carry case protects your mask from germs and outside contaminants
- 3 different sizes available to suit your specific mask
- Cases sold individually
- Manufactured by GVS in USA.
