FREE SHIPPING ON ORDERS OVER $100! | SEE IF YOU QUALIFY FOR A BLASTONE CREDIT ACCOUNT x

Search: hand tools

Products

MontiPower® Bristle Blaster System

The Bristle Blaster® is a portable surface preparation tool that combines wire wheels with an ingenious accelerator bar*, to speed production. Benefits include the following:

  • Excellent for spot work.  Small projects such as rework, weld cleaning, etc., are faster due to no abrasive cleanup needed.
  • Highly portable.  Light weight and compact makes usage and storage a breeze.
  • Simple to use.  No need to suit up to use it.
  • Quick setup.  Plug in and go!
  • Safe for most surfaces.  Unlike a grinder, the Bristle Blaster® creates a surface profile without removing metal.

While the production speed isn’t as high as traditional abrasive blasting, the benefits of no mess and quick setup/teardown make this a very efficient tool for spot work and repairs.  It is up to 10x faster than using a hand wire brush. The Bristle Blaster® tools are available in 3 power configurations:

  • Electric.  Requires 910 watts at 120v.
  • Pneumatic.  Uses standard shop-air line.  Requires less than 20 CFM at 75 or 90PSI.
  • Cordless.  Rechargeable battery power offers the ultimate in portability.

There are 3 orientation configurations for the wheels, as follows:

  • Standard wheel (general purpose)
  • Double wheel  (faster production for larger surfaces).  Note – available in electric only.
  • Axial (right angle) wheel (great for reaching inside corners or other areas difficult to reach with the standard wheel).  Note – available in pneumatic only.

Additional notes:

  • These units create a surface profile between 2.5 and 3.5 mils.
  • Wire wheels are also known as belts.  BlastOne stocks all carbon steel and stainless Bristle Blaster® replacement belts.
  • The standard pneumatic kit includes a dust shroud for attachment to a vacuum cleaner, for even faster clean up.
  • Other belt types and machine models available – enquire.

*The Axial version does not come with an Accelerator Bar.

Pinovo PiConnect Blast and Vacuum Workhead

  • A lightweight closed-circuit vacuum blaster with interchangeable heads.
  • Edge blasting tools.
  • Nozzle size: No.6 (⅜”)
  • Blasting rate: up to 27 ft²/2.5 m² per hour.
  • Compressed air requirement: 320 cfm.
  • Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
  • Genuine Parts – Manufactured by Pinovo in Norway.
  • Limited availability in the USA – Request a quote/express interest.

SnakeBite Strike #10 Silenced Blast Nozzle

  • WATCH VIDEO IN THE IMAGE SLIDER
  • Highest productivity hand held blast nozzle available
  • Over double the productivity of a #8 high performance blast nozzle with less operator fatigue
  • Half the thrust of other #10 blast nozzles available – Feels like you’re blasting with a #7 nozzle
  • Up to 16dBA noise reduction – That’s 75% quieter!
  • Ideal for blasting acres of steel such as storage tanks, bridges and ship hulls
  • Standard contractor nozzle inlet thread
  • Delivers faster cleaning rates and increased profit by reducing project duration
  • Requires 750cfm compressor
  • FREE TRIAL AVAILABLE!

Nitto Kohki Electric Needle Scaler

Industrial Electric Needle Scaler has the following specifications:

  • 115v / 300w / 2.8 amps
  • Standard needles with machine are 15 pieces of 3mm x 7 inches
  • Optional needles are 32 pieces of 2mm x 7 inches
  • Standard needles are carbon steel.  Optional non-sparking beryllium/copper or stainless steel needles are available.
  • Adjustable front handle for operator convenience
  • includes 6mm Allen wrench

Scaling Hammer Parts: Rubber Grip

When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Rubber Grip (717.5301) for both the SF1 Single Head and SF3 Triple Head Scaling Hammers.

View All

Graco RAC 5 Hand Tite Tip Guard

  • Suits Graco RAC 5 Airless Spray Tips
  • Works to keep the tip in place, provide easy switch out and reduce the chance of injury
  • Thread Size is 7/8″
  • Sold Individually
  • Genuine Parts – Manufactured by Graco

Trelawny Tool Vacuum System HEPA Compatible

  • Electric vacuum available – wet & dry (HEPA)
  • Best used with
    • TFP200 Deck Scaler
    • SF11 Deck Hammer
    • Peening Prep Tool
    • Trelawny range of Hand Scalers
  • Pneumatic vacuum available – wet & dry (HEPA)
  • Best used with
    • Trelawny range of EX tools for use in explosive environments
      • VL303 Needle Scaler
      • SF1 Scaling Hammer
      • SF11 Deck Hammer

Trelawny Hand Held Scaler

  • Scaling hammers are used for Removal of:
    • Hard coating
    • High Build ups
    • Corrosion
  • Use with Trelawny TVS Vacuum.
  • Available as various options:
    • SF1 Single Head
      • Cruciform
      • Single Piece Steel Piston
    • SF1 VL Single Head (Low Vibration)
      • Cruciform
    • SF3 Triple Head
      • Cruciform
      • Beryllium Copper Cruciform
      • Single Piece Steel Piston
    • VLSF1-EX Single Head (Low Vibration and ATEX)
      • Beryllium Copper Taper Fit
    • SF3-EX Triple Head (ATEX)
      • Beryllium Copper Taper Fit
  • Genuine Products – Manufactured by Trelawny

Pinovo PiCo Pipe Vacuum Blasting Workhead

  • Pinovo Pico is one of the most ingenious vacuum blasting discoveries in 10 years
  • Hand-held dustless external pipe blasting system.
  • Multiple different sized work-heads adapt to different sized pipe.
  • Works for 2″ – 8″ pipes
  • Genuine Parts – Manufactured by Pinovo in Norway
  • Minimal Availability in USA – Request a quote/express interest

Goat Skin Leather Driver Gloves

Step up your hand protection with our Goat Skin Leather Driver Gloves, SKU: P-NA206. Combining value and durability, these unlined gloves offer sleek comfort and superior flexibility for everyday wear.

  • Available in sizes S to XXL.
  • Sold by the pair.
  • Quantity and bulk discounts available.

Perfect for those seeking durable, yet comfortable work gloves.

Ball and Chain Sure-Fire Electric Deadman Handle

The Sure-Fire Electric Deadman Remote Control Handle (SKU: P-DMWTXE) is a compact, hands-free electrically-operated tool. Available in 12V and 24V options, it’s designed for enhanced operational control. Note: Accessories like TwistLok plug and extension cable sold separately.

  • Compact ‘hands-free’ design
  • Ball and chain not included – operator must use as per instruction manual
  • 12 Volt or 24 Volt electric operation
  • 2-wire is standard or 3-position toggle switch for use with integrated remote abrasive cut-off switch
  • Order TwistLok plug and/or extension cable separately

Pinovo PiPoint Mini Blast and Vacuum Workhead

  • The PiPoint is the smallest hand-held vacuum blasting tool.
  • Has 8 interchangeable heads providing flexibility for different job requirements.
  • Allows you to blast inside a small box web beam, etc.
  • Nozzle size: No.6 (⅜”)
  • Blasting rate: up to 6 ft²/0.6 m² per hour.
  • Compressed air requirement: 250 cfm.
  • Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
  • Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
  • Noise level: 89 dB at 1m distance.
  • Genuine Parts – Manufactured by Pinovo in Norway

Limited availability in the USA – Request a quote/express interest.

Genuine replacement parts for MontiPower pneumatic Bristle Blasters

This group includes the following:

  • 360 degree swivel connection to facilitate ease of use
  • 75 and 90 PSI pressure regulators to pair with the 11mm and 23mm hub assemblies
  • The replacement radial arm for the axial right-angle Bristle Blaster.
  • Easy to install and replace
  • Designed specifically for pneumatic MontiPower Bristle Blaster
  • Improves the performance and lifespan of your tool

PosiTector® DPMS K-Type Thermocouple Sensor Accessories

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

The PosiTector® DPMS version (only) in the Dew Point Meter family of probes has the unique capability of accepting these two optional accessories, which are:

  • PRBDPMHSP, Hand-Held Surface Temperature Probe, for spot checking hard-to-reach surfaces
  • PRBDPMLTP, Liquid Temperature Probe, for checking the temperature of paint and other industrial liquids

Graco® Tip Extension with RAC 5 Guard

  • Includes Hand Tite RAC 5 Tip guard (RAC X available – please check availability)
  • Unique captive gasket for simple, fast connection
  • 7/8″ nut fits Graco or Titan airless guns
  • 4,050 psi rated
  • Purchase spray tip separately

Needing higher pressure rated extensions? Please contact BlastOne for details

Premium Radiator Brush

  • 2″ (50mm) Premium bristle
  • Bristle angle machined into timber handle helps durability
  • Ideal brush for stripe coating, and for cleaning paint items in a solvent bucket
  • A must for every painting contractor
  • Comes in 12 pack quantities

Tite-Space Angle Nozzles

Tite-Space nozzles are angle nozzles, designed for use in areas that are especially difficult to access, and feature:

  • 3/8″ NPT Thread in either Male or Female configuration
  • Male version has brass threads and requires a minimum opening clearance of 1″.  This version is 1-7/8″ long.
  • Female version has steel threads and requires a minimum opening clearance of only ¾”.  This version is 3-1/8″ long.
  • These nozzles are often used in conjunction with our Tite Space Invader Blasting Kit, available here
  • Angle options include:
    • 45° & 60° forward blast
    • 90° right angle blast
    • 135° reverse blast
  • Some options available in double, triple or quad orifices in addition to single.
    • Note:  Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly.
  • Stock version uses tungsten carbide lining.

Note:  Due to the angled blast stream, these nozzles will wear more quickly than traditional versions.  For larger projects, we offer long-life Roctec nozzle linings by special order, with a minimum order quantity of 5.  Contact us for further details.

DeFelsko® PosiTector® AC Power Kit

The DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.

  • Designed for uninterrupted use of PosiTector® devices
  • Includes USB cable and AC power adapter for versatile power options
  • Compatible with a wide range of PosiTector® models
  • Selection of electrical plugs for international compatibility
  • Ideal for continuous operation without battery dependency

Klingspor Titan Flap Discs

Klingspor is a major manufacturer of abrasive products for hand tools. Their SMT flap discs (aka mop discs) are engineered for intensive grinding tasks and are of industrial quality.

The Titan series is their premium line and these 4-½” flap sanding discs offer significant advantages over other versions, including:

  • Longer life.  The trimmable plastic backing plate allows usage of all of the abrasive.
  • Cooler running.  With the unique fan shape of the backing, run temperature is reduced, further extending disc life.
  • Spin-on design.  The 5/8″-11 arbor allows quick and easy installation without the need of tools.

All common industrial versions are available including:

  • Abrasive options.  Available with alumina zirconia, ceramic, or non-woven abrasive in either standard grain or coated with lubricant (cooler running, often used on stainless).
  • Design types.  Offered in either convex angled (for curved work) or flat configurations.
  • Thicknesses.  Choose from either standard or jumbo types.

Priced per each, with discounts available when purchased in box quantities of 10.

MPN:  SMT 624T, SMT 636T, SMT 996T, SMT 975, SMT 950T-XL

Other versions available – contact us for other options.

Klingspor Abrasive Fiber Discs

Klingspor is a major manufacturer of abrasive products for hand tools. Their fiber discs are engineered for fast stock removal in metal grinding applications and are of industrial quality.

This series from Klingspor is designed for use with a standard nut-mount disc backing pad.  These are not intended for use on a quick-lock backing pad.

  • Abrasive options. 
    • CS 561 Aluminum Oxide (economical for limited stock removal)
    • CS 565 Alumina Zirconia (general purpose for heavier stock removal)
    • CS 570 Lubricated Alumina Zirconia (general purpose for heavier stock removal with reduced heat buildup)
    • FS 964 Ceramic  (Heavy stock removal on carbon steel)
    • FS 966 Lubricated Ceramic (Heavy stock removal with reduced heat buildup, for all metals including stainless)
  • Size options.
    • 4-½”
    • 5″
    • 7″
    • 4″ (selected models only)
    • 9″ (selected models only)

Note: All versions come in boxes of 25 discs, and are priced by the box.

Klingspor Power Wheels Surface Conditioning Discs

Klingspor is a major manufacturer of abrasive products for hand tools. These Powerwheels are closely akin to flap discs, but with a non-woven structure which virtually eliminates clogging.

Also known as ‘clean and strip’ discs, they are excellent for cleaning surfaces, removing heat discoloration with the HD version being excellent at heavier duty applications requiring more aggression.

Two versions as follows:

  • NCD 200.  Impregnated with silicon carbide for general purpose cleaning including removal of rust, mill scale, and paint.
  • NCD 200HD.  Impregnated with ceramic abrasive, this wheel will last the longest in demanding applications.

Both versions can be used on all metals, stainless steel, and plastics.

Air Inlet Kit for RPB Nova 3

  • Air Inlet Kit includes Male Threaded Inlet fitting, Screws and hand strap (NV3-729)
  • Suits RPB Nova3 Blast Helmet
  • Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

DeFelsko® PosiTector® UTG Ultrasonic Thickness Gauge

The PosiTector UTG – DeFelsko’s solution for measurement of wall thicknesses of pipes, tanks, and more where access is limited to one side.  Here are some highlights of the highly capable DeFelsko ultrasonic thickness gage probe family:

  • Familiar.  The UTG family of probes are interchangeable with the tried-and-true DeFelsko gage body platform.
  • Capable.  Six different probe versions are available, depending on the requirements of the application.  The first four are standard corrosion single-echo probes designed for applications where the surface is unpainted (or has the paint removed.)
    • PRBUTGC:  Standard frequency 5mz transducer. Cabled.
    • PRBUTGCX:  Xtreme version of above with a braided stainless cable with strain relief for demanding use.
    • PRBUTGCA:  Same as above, except integral  non-cabled design. This version is ideal for one-handed use.
    • PRBUTGCLF.  Low-frequency 2.25mz transducer for attenuative materials like cast iron.  Standard cable.
  • The following two models are both cabled, and can be used on either painted or non-painted substrates.
    • PRBUTGM:  5mz transducer with highly versatile single and multi-echo modes.  Single mode offers greater (up to 5 inches thick) measurement range, but should be used where paint has been removed.  Multi-echo mode does not require the paint to be removed and can measure walls up to 2.5 inches thick.  This version has a durable alumina wear face and is ideal for use on rough or blasted surfaces.
    • PRBUTGP: 15mz transducer offers high precision when measuring thin materials (up to .475 inch thick steel or up to .175 inch thick plastic).  It has automatic single / multi echo mode switching for use on painted or unpainted surfaces.  This probe can be used to measure thicknesses of plastic bottles, aircraft windows, thin-wall pipe, and much more.
  • Configurable.  Any of the six probes can be configured in the following packages:
    • Probe only.  Use with your existing PosiTector gauge.
    • Standard PosiTector package with choice of probe.
    • Advanced PosiTector package with choice of probe.
    • Note:  All PosiTector UTG packages come with case, ultrasonic gel, calibration certificate,  and more.

Compare the features of the PosiTector Standard vs Advanced Body on their separate web page.

DeFelsko® PosiTector® SPG Surface Profile Gauge

The PosiTector® SPG – DeFelsko’s solution for measuring surface profiles on both metal and concrete surfaces – without the need of Testex® tape.  This inspection instrument system is capable and configurable, and has the following highlights:

  • Familiar.  Built on the tried-and-true PosiTector gauge / body platform, using interchangeable probes.
  • Capable.  Five separate probe designs available as follows:
    • PRBSPG.  Integral probe for one-handed use. Measures flat blasted steel.
    • PRBSPGS.  Cabled probe for enhanced ergonomics and/or access to hard-to-reach areas. Measures flat blasted steel.
    • PRBSPGOS.  Cabled probe for use on convex curved blasted steel (especially pipes).
    • PRBSPGCS.  Cabled probe for measuring textured coatings and other surface profile applications.
    • PRBSPGTS.  Cabled probe for measuring concrete profile.
  • Configurable.  Available as follows:
    • Probe only.  Use with your existing PosiTector gauge.
    • Standard PosiTector body package with choice of probe.
    • Advanced PosiTector body package with choice of probe.
    • Note:  All PosiTector SPG packages come with case, zero plate / shim, calibration certificate, and more.

Specifications and features of the PosiTector® Standard and Advanced Gauge / Bodies can be compared on their separate web page.

Graco XHD RAC SwitchTips, 6 to 8 inch fan width (Size prefix 3)

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

  • This 7250 PSI Airless Spray Tip group has 6 to 8 inch fan width (XHD3 series).
  • In this group, the orifice sizes range from .007 to .055 inches (sizes 307 to 355).
  • Ideal for use with industrial high solids and heavy duty coatings
  • Heavy-duty carbide tip construction
  • Designed to be used with the Graco XHD Tip Guard
  • Genuine parts – manufactured by Graco

Skid Mounted Vacuum System – VacuLoad Series I

AVAILABLE FOR RENTAL OR PURCHASE

    • FREE Shipping
    • 30 Day Money-Back Guarantee | Free Returns
    • Will vacuum upto 2 ton/hour
    • Requires 350 cfm compressed air at 120 psi
    • 1 Dust Collector Cartridge with filtration area of 229 sq ft.
    • Automatic Reverse Pulse Cleaning
    • Use with 3″ vacuum hose

Graco XHD RAC SwitchTips, 8 to 10 inch fan width (Size prefix 4)

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

  • This7250 PSI Airless Spray Tip group has 8 to 10 inch fan width (XHD4 series).
  • In this group, the orifice sizes range from .009 to .081 inches (sizes 409 to 481)
  • Ideal for use with industrial high solids and heavy duty coatings
  • Heavy-duty carbide tip construction
  • Designed to be used with the Graco XHD Tip Guard
  • Genuine parts – manufactured by Graco

Graco XHD RAC SwitchTips, 10 to 12 inch fan width (Size prefix 5)

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

  • This 7250 PSI Airless Spray Tip group has 10 to 12 inch fan width (XHD5 series).
  • In this group, the orifice sizes range from .009 to .075 inches (sizes 509 to 575)
  • Ideal for use with industrial high solids and heavy duty coatings
  • Heavy-duty carbide tip construction
  • Designed to be used with the Graco XHD Tip Guard

Graco XHD RAC SwitchTips, 12 to 14 inch fan width (Size prefix 6)

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

  • This 7250 PSI Airless Spray Tip group has 12 to 14 inch fan width (XHD6 series).
  • In this group, the orifice sizes range from .009 to .075 inches (sizes 609 to 675)
  • Ideal for use with industrial high solids and heavy duty coatings
  • Heavy-duty carbide tip construction
  • Designed to be used with the Graco XHD Tip Guard

Graco XHD RAC SwitchTips, 14 to 16 inch fan width (Size prefix 7)

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

  • This 7250 PSI Airless Spray Tip group has 14 to 16 inch fan width (XHD7 series).
  • In this group, the orifice sizes range from .011 to .071 (sizes 711 to 771)
  • Ideal for use with industrial high solids and heavy duty coatings
  • Heavy-duty carbide tip construction
  • Designed to be used with the Graco XHD Tip Guard
  • Genuine parts – manufactured by Graco

Graco XHD RAC SwitchTips, 4 to 6 inch fan width (Size prefix 2)

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

  • This 7250 PSI Airless Spray Tip group has 4 to 6 inch fan width (XHD2 series).
  • In this group, the orifice sizes range from .009 to .039 inches (sizes 209 to 239)
  • Ideal for use with industrial high solids and heavy duty coatings
  • Heavy-duty carbide tip construction
  • Designed to be used with the Graco XHD Tip Guard
  • Genuine parts – manufactured by Graco

Graco XHD RAC SwitchTips, 16 to 18 inch fan width (Size prefix 8)

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

  • This 7250 PSI Airless Spray Tip group has 16 to 18 inch fan width (XHD8 series).
  • In this group, the orifice sizes range from .013 to .067 inches (sizes 813 to 867)
  • Ideal for use with industrial high solids and heavy duty coatings
  • Heavy-duty carbide tip construction
  • Designed to be used with the Graco XHD Tip Guard
  • Genuine parts – manufactured by Graco

Graco XHD RAC SwitchTips, 18 to 20 inch fan width (Size prefix 9)

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

  • This 7250 PSI Airless Spray Tip group has 18 to 20 inch fan width (XHD9 series).
  • In this group, the orifice sizes range from .023 to .039 (sizes 923 to 939)
  • Ideal for use with high solids and heavy duty coatings
  • Heavy-duty carbide tip construction
  • Designed to be used with the Graco XHD Tip Guard
  • Genuine parts – manufactured by Graco

Graco XHD RAC SwitchTips, 2 to 4 inch fan width (Size prefix 1)

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:

  • This 7250 PSI Airless Spray Tip group has 2 to 4 inch fan width (XHD1 series).  All other Graco XHD tip sizes are also available.
  • In this group, the orifice sizes range from .007 to .039 inches (sizes 107 to 139)
  • Ideal for use with industrial high solids and heavy duty coatings
  • Heavy-duty carbide tip construction
  • Designed to be used with the Graco XHD Tip Guard
  • Genuine parts – manufactured by Graco

LPI Paint Lift Wall Mounted Personnel Lift

Heavy duty personnel lift for use in a variety of applications by typically for paint.  Greatly improves safety and accessibility, meaning you can get painting or preparation jobs done quicker, safer, and allow greater throughput as well.

Trelawny RotoPeen Handtool with Vacuum

  • Ideal for preparing flat or large vertical areas such as beams, girders and tanks.
  • Scarifies the surface, using a large range of different heads
  • 3M Flappers, Star Bits, TC Cutters and more all mount on a spinning head
  • Use with Trelawny TVS Vacuum.
  • Genuine Products – Manufactured by Trelawny

GMA PrecisionBlast 120 Mesh Garnet Abrasive

The GMA PrecisionBlast 120 Mesh Garnet Abrasive (SKU: P-GA120), is a MilSpec Approved abrasive ideal for delicate surface preparation. Offering a fine surface profile of 1.0 – 2.0 mil (25 -50µm) or less, this abrasive boosts blasting rates up to 330 ft²/hr and a low consumption rate of 1.25 – 2.0 lb/ft². Its low dust factor and recyclability of 2/10 make it perfect for precision tasks on sensitive substrates like stainless steel, aluminum, titanium, and glass.

  • Creates a fine surface profile of 1.0 – 2.0 mil
  • High blasting rates up to 330 ft²/hr
  • Low consumption rate of 1.25 – 2.0 lb/ft²
  • Low dust factor for cleaner operations
  • 120 mesh size for delicate cleaning tasks
  • Ideal for etching glass and preparing sensitive metals
  • Sold by the pallet (pallet minimum)
  • Abrasive cannot be ordered online at this time

Graco XHD Heavy Duty Spray Tip Guard

  • Suits Graco XHD Airless Spray Tips
  • 7250 psi rated
  • Works to keep the tip in place, provide easy switch out and reduce the chance of injury
  • Hand-tight guard – no tools required
  • Long life guaranteed
  • Tip and guard are interchangeable with the GHD spray tip
  • Use with industrial high solids and heavy duty coatings
  • Genuine Parts – Manufactured by Graco

DeFelsko® PosiTector® DPM Dew Point Meters

The PosiTector® DPM – DeFelsko’s solution for measurement of climatic conditions for industrial coating applications.  Versatile and capable, these environmental measuring instruments have the following highlights:

  • Familiar.  Built on the tried-and-true PosiTector® gauge/body platform design with interchangeable probes.
  • Capable.  Measures and records environmental conditions including:
    • Relative Humidity (RH)
    • Air Temperature
    • Surface Temperature
    • Dew Point temperature
    • Surface/Dew Point Delta
    • Wind speed (one model only)
    • Wet-Bulb (when used with Advanced Bodies only)
  • Configurable.  Available as probes-only (to use with an existing gage/body), or in packages with a new gage body, these DPM probes are available as:
    • DPM Integral, with direct-contact surface thermometer
    • DPMIR Integral, with infrared surface thermometer, for use on moving parts, very hot parts, etc., where direct contact is not possible.
    • DPMS Integral, with cabled, magnetic surface temperature sensor for continuously logging surface temperatures. Also available for this model are 2 options:
      •  A liquid temperature probe, for measuring paint temperature prior to application
      • A hand-held surface temperature probe, for spot-checking hard-to-reach areas.
    • DPMA Integral, with all standard features plus a wind-speed indicator
    • DPMD Cabled, with ½” NPT threads for insertion into pipe and other areas that can’t be accessed by other versions.

Note:  The PosiTector® DPM L is an autonomous version, and can be attached independently to steel for longer-term climatic condition recording.

Graco® Xtreme PFP Single-Component Sprayer

  • Used for the handling of high-viscosity coatings
  • Prime alternative to troweling
  • Ideal for touchup jobs and/or difficult-to-reach areas
  • 5-gal dual post ram provides ample down force to load pump
  • 290 cc Xtreme lower designed specifically for heavy viscosity material
  • Tool-less wiper plate removal for easy maintenance
  • Durable, rugged cart allows for single-person maneuverability

Klingspor Original Flap Disc Series

Klingspor is a premium manufacturer of abrasive products for hand tools.  Their SMT flap discs (aka mop discs) are engineered for intensive grinding  tasks, and are of industrial quality. This original series are somewhat less costly than the Klingspor Titan Flap Disc series and selected features are as follows:

  • Arbor.  All versions (except 1) have the standard 7/8″ open arbor for nut-mounting.
  • Sizes.  All versions come in 4-½” diameter, with selected models also available in 6″ and 7″.
  • Quality Classes.  3 grades available as follows:
    • Special.  High performance and service life in the most demanding applications.
    • Supra.  Reliable performance with a superior blend of life and aggression.
    • Extra.  Professional quality at a more affordable price for operators who do not use them continuously.
  • Abrasive choice.  All common industrial abrasives available including alumina zirconia, ceramic, and aluminum oxide.

Trelawny Heavy Duty Needle Scaler

  • Trelawny Needle Scalers for rust, scale and paint removal
  • Heavy Duty, High Quality Hand Tools
  • Pneumatic Operation
  • Preferred option for Low Vibration, someone can work for twice as long with Low Vibration
  • Come with a different quantity of needles, the more needles the more work you get done.
  • Pistol Grip vs Inline based on where you are working, most contractors use 5:1 Pistol Grip
  • Sold Individually
  • Genuine Parts – Manufactured by Trelawny

Informational Content

View All
Add to quote:

Registration is required to create a Quote.

Click Here to Login or Register.

Add to existing quote:

Add to Quote

Add to a new quote:

Send the request

BlastOne says
Thank you for submitting your quote. A sales representative will follow up with you asap.
Share Quote via Email

Share