FREE SHIPPING ON ORDERS OVER $100! | SEE IF YOU QUALIFY FOR A BLASTONE CREDIT ACCOUNT x

Search: robots

Products

VertiDrive V700 Blasting Robot

RENT or PURCHASE this surface preparation work-horse! The next-generation V700 VertiDrive. Boosting performance and profits on large blasting projects.

Purchase pricing is typically between $125,000 and $204,000, depending on configuration.

BlastOne can provide on-site training and ongoing support to ensure maximum productivity from Day 1.  Schedule a call with our SMEs to calculate and expected ROI for your next project.

  • Faster Production.  Now holds up to 3 nozzles and each nozzle is up to 30% faster than the best hand blasting.  Highest productivity of any robotic blasting system!
  • Cleaner Surface.  Provides consistent blasting quality by adjustment of equipment speed to the specific surface needs.
  • Safer.  Remote control operation removes the operator from harms way.
  • Capable.  Boosted magnetic performance allows standard operation on carbon steel surfaces that are horizontal, vertical, and now even upside-down!
  • Versatile.  The V700 can be configured in 3 ways:
    • Abrasive Blasting.  Can blast either wet or dry.
    • Ultra High Pressure (UHP) coating removal.
    • Power Wash surface cleaning.
  • Reduced Cost-of-Ownership.  The VertiDrive V700 has the lowest maintenance cost of any blasting robot.
  • Looking for more information? Click here to read more…

Note:  We recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) and can deliver cost savings on projects as small as 10,000 square feet.  Not all medias can be used with the VertiDrive. Can be used with existing blast or UHP equipment, or BlastOne can provide new and updated equipment.

VertiDrive V400 Closed-Loop UHP Robot

RENT or PURCHASE this surface preparation work-horse!

The next-generation V400 Ultra High Pressure VertiDrive. Bringing enhanced technology to closed-loop UHP projects.

  • Faster.  V400 robotic technology is up to 5X faster than manual work.
  • Cleaner.  The rust, coatings, and contaminants are removed and returned to the vacuum via the closed-circuit system.
  • Safer.  Remote control operation removes the operator from harms way.
  • Capable.  Boosted magnetic performance allows standard operation on carbon steel surfaces that are horizontal, vertical, and even upside-down!
  • Environmentally friendly.  Contaminants don’t just fall to the surface or blow away in the wind.  The V400 brings them back to the vacuum source for responsible disposal.
  • Productive.  Has an extra-wide 15.5″ (400 mm) cleaning width

Note:  UHP does not create surface profile , but exposes the existing profile.

We recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) with at least 10,000 square feet to realize cost savings.  Can be used with existing UHP pumps or BlastOne can arrange.  Purchase pricing is typically between $165,000 and $204,000 depending on configuration.

BlastOne can provide on-site training and ongoing support to ensure maximum productivity from Day 1.  Schedule a call with our SMEs to calculate an expected ROI for your next project.

VertiDrive M7 Blasting Robot

RENT or PURCHASE this surface preparation work-horse!

The original M7 VertiDrive.  Bringing improved production to large blasting projects.

  • Faster Production.  Holds 2 nozzles simultaneously and each nozzle is up to 30% faster than the best hand blasting.
  • Cleaner Surface.  Provides consistent blasting quality by adjusting equipment speed to the specific surface needs.
  • Safer.  Remote control operation removes the operator from harms way.
  • Capable.  Blast both horizontal and vertical surfaces with ease.
  • Versatile.  The M7 can be configured in 3 ways:
    • Abrasive Blasting.  Can blast either wet or dry.
    • Power Wash surface cleaning
    • Ultra High Pressure (UHP) coating removal.

Note:  we recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) with at least 10,000 square feet to recognize cost savings.  Not all medias can be used with the VertiDrive.

Can be used with existing blast equipment, or BlastOne can provide. Purchase pricing is typically between $125,000 and $204,000, depending on configuration.

 

BlastOne offers on-site training to help maximize your investment.  Contact us to discuss your specific project and estimate the ROI by using a VertiDrive.

Large Internal Pipeline Blasting Robot

FOR RENTAL OR PURCHASE

  • Ideal for blasting penstocks, tunnels, pipelines, wind towers, etc.
  • Offers full 360 degree coverage of pipe internals
  • Self-propelled forward or reverse motion
  • Can blast pipelines 3′ – 32′ in diameter
  • Lowers labor costs as much as 75% compared with manual blast-pot operations
  • Eliminates inconsistencies commonly found with manual blasting

Blastman Blasting Robots for Blastroom applications

  • Robots made by Blastman Robotics specifically for Blastroom applications
  • Available as 4-Axis, 7-Axis or 8-Axis.
  • Available as Wall Mount or Gantry Mount
  • Optional Man cabin for manual blasting which can come mounted on the blasting arm, or as a separate cabin
  • 20+ years of installation and robotic experience
  • Read here for more pictures of Blastman Blasting Robots
View All

Qlayers 10Q Painting Robot

This package includes the following: 

  • 10Q Painting Robot
  • Trailer Package to contain pumps and controls
  • Graco Plural Sprayer
    • Mixing at the pump for 2 pack coatings
    • Can be used with a single pack
  • Ventilation unit for the robotic paint head
  • Robotic painting head with gun
  • Maximum of 150 ft of hose from the trailer to the robot
  • Fall arrest
  • $420,000 to $470,000 depending on configuration

Additional components such as heat, power, and accessories, are dependent on the configuration. Contact us to learn more.

Rail Car Blast Room

Designed to improve throughput and lower operating costs in Railcar Facilities, these Blast Rooms are suitable to railcar relining, refurb, or new build.

TeraValve™ XL Base

BlastOne has replacement parts for all Axxiom / Schmidt metering valves.  This group includes the various sizes of pipe nipples, at the bottom of the base.

  • ¾” x ¾” (Axxiom part #: 2130-005-12)
  • 1″ x 1-¼” (Axxiom part #: 2130-006-12)
  • 1-¼” x 1-¼” (Axxiom part #: 2130-007-12)
  • 1-½” x 1-½” (Axxiom part #: 2130-008-12)
  • NEW – 2″ x 2″ (Axxiom part #: 2130-009-12F), offers maximum flow for high volume applications, such as VertiDrive robot.
  • Base of Hardened Steel for extended usability
  • Genuine Schmidt® Product

Wind Tower Blast Room

These blast rooms are designed to improve flow in a Wind Tower manufacturing facility, and can be made to handle both internal and exterior blast, with nearly any level of automation.

Temporary Modular Facility

  • Permanent or temporary mounting systems
  • Ideal for setting up temporary blasting/painting facilities
  • Supplied in modular kit for simple, quick installation (under a week)
  • Fully relocatable — easy to install and dismantle
  • 100% Waterproof design
  • Wind rating as per local requirements
  • No concrete foundation necessary
  • Compatible with optional abrasive recovery and dust collection equipment

SnakeBite Strike #10 Silenced Blast Nozzle

  • WATCH VIDEO IN THE IMAGE SLIDER
  • Highest productivity hand held blast nozzle available
  • Over double the productivity of a #8 high performance blast nozzle with less operator fatigue
  • Half the thrust of other #10 blast nozzles available – Feels like you’re blasting with a #7 nozzle
  • Up to 16dBA noise reduction – That’s 75% quieter!
  • Ideal for blasting acres of steel such as storage tanks, bridges and ship hulls
  • Standard contractor nozzle inlet thread
  • Delivers faster cleaning rates and increased profit by reducing project duration
  • Requires 750cfm compressor
  • FREE TRIAL AVAILABLE!

DeFelsko® PosiTector® 200 Ultrasonic Coating Thickness Gauge

The PosiTector® 200 – DeFelsko’s solution for measuring coating thicknesses on non-metallic substrates.  Capable and configurable, it has the following highlights:

  • Familiar.  Built on the tried-and-true PosiTector® gauge body platform / interchangeable measurement probe design.
  • Capable.  Three separate probe designs available for the following applications:
    • PRB200B: Polymer coatings on wood, plastic, etc. up to 40 mils
    • PRB200C: Coatings on concrete, fiberglass, etc., from 2-150 mils
    • PRB200D: Thick/soft coatings such as polyurea, etc. from 2-300 mils
  • Configurable.  Available as follows:
    • Probe only.  Use with your existing PosiTector® gauge.
    • Standard PosiTector® package with choice of probe.
    • Advanced PosiTector® package with choice of probe.
    • Note:  All PosiTector® 200 packages come with case, ultrasonic gel, calibration certificate, shims, and more.

Note:  Compare specs and features of the DeFelsko Standard vs Advanced Gage/Bodies on their separate web page.

Mega Blaster Bulk Blast Machine

Production work-horse for big dry-blast projects!  Save time and money when doing large projects.

  • Industrial Quality & Design – Manufactured by Schmidt to BlastOne specifications
    • Long-life TeraValve metering valves – typically 4-outlets
    • High flow plumbing virtually eliminates pressure drop
  • Huge abrasive capacity – Up to 160 cubic foot (aka 8 ton pot) holds half a truckload of garnet!
  • Flexible configuration – Available with:
    • Highway Trailer
    • Yard Trailer
    • Skid mount
    • Shipping Legs (for mounting on your own equipment)
  • Latest Generation Safety features
    • Halok closure – impossible to open under pressure
    • CEN muffler – reduces noise AND prevents freeze-up
    • Anti-slip ladder rungs
  • Available Performance Enhancing Options
    • Bulk Bag Loading Rack – enhances safety while loading
    • Hybrid – attached dryer saves space & setup time
    • Vacuum loading – saves wait time for cranes where forklift loading of abrasive is prohibited
    • Hour meters – management tool monitors nozzle time

Favorite for use with the VertiDrive robots! Rent or purchase.  

30 Day Money-Back Guarantee | Free Return | 90 Day Manufacturer Warranty

Note:  Designed to be used with a 1600 CFM dryer, available here.

160 CF Mega MistBlaster Blast Machine, 4-Outlet

Our latest generation Mega MistBlaster offers both wet and dry blasting for the ultimate in flexibility!  It reduces costs and time when doing large projects and offers the following:

  • Versatility.  4 functions available at the flip of a switch:
    • MistBlasting / Wet (slurry) Blasting
    • Traditional Dry Blasting
    • Wash-down mode
    • Blow-off mode
    • Each outlet is independently controlled, giving even greater versatility.
  • Capability.  With its 4 outlets, this workhorse can power up to 4 operators OR a VertiDrive robotic blaster and manual blasting simultaneously.
  • Huge capacity – As typically configured with 160 cubic feet (aka 8 Ton), this bulk pot holds half a truckload of garnet.
  • Mount Options as follows:
    • Highway Trailer
    • Skid Mount
    • Shipping Legs (for mounting on your own equipment)
  • Available Cost Saving Option – We can convert your existing Schmidt® Dry bulk pot with to our Mega MistBlaster with our retrofit package. Available as a Limited version (without metering / air valves, for new pots) or as a Full version (with all valves, for used pots).

More options and features shown under the description tab. Available for Purchase or Rental. Ask about a demo! Note: Designed for use with a 1600 CFM dryer, available here.

Velocity™ System

Technology insertion to exponentially increase shipyard blast and coat production.

COMPONENTS & FEATURES

The individual technologies include, but are not limited to:

  • Intelliblast Blast Pot Controls:
    • Smart controls that optimize blasting parameters for maximum efficiency and effectiveness.
  • Snakebite Blasting Nozzles
    • High-performance nozzles designed for precise and powerful material removal, reducing blasting time and lowering process noise.
  • Rapidly Deployable Containments
    • Innovative containment systems that can be quickly deployed, ensuring a controlled environment, and minimizing the spread of contaminants.
  • Vortex Airflow Movement
    • Proprietary airflow design that lowers energy consumption, enhances ventilation, and ensures the efficient removal of particles from the blasting and painting areas.
  • Combination Dual Air Plenums
    • Dual air plenums that provide a uniform and controlled airflow, optimizing the blasting and painting processes.
  • Energy Recovery System (ERS)
    • An energy recovery system that captures and recycles heat energy, reducing overall energy consumption and operational costs
  • Robot Ready Design
    • A structure and system that is designed to be capable of supporting automated process equipment

BENEFITS 

  • Faster production cycles
  • Reduced operational costs
  • Enhanced environmental sustainability
  • Improved worker safety

Informational Content

View All
Add to quote:

Registration is required to create a Quote.

Click Here to Login or Register.

Add to existing quote:

Add to Quote

Add to a new quote:

Send the request

BlastOne says
Thank you for submitting your quote. A sales representative will follow up with you asap.
Share Quote via Email

Share