FREE SHIPPING ON ORDERS OVER $100! SEE ALL PROMOS x

Home / Resources & Training / Product Catalog: technical reference information

Quick Cross Reference to some useful Industry Standards,
Technical Guidelines and Publications

Paints/Coatings

ReferenceAS, ASNZSASTMISOOTHER
General
Glossary of terms2310
HB73
D16
D4538 (Power Stations)
28199-1
Batch sampling of coating1580-102D392515528
Volume Solids, VOC1580.301.1/2D1353
D2369
D2832
D3960
11890
3251
3233
SSPC Guide 10
JIS K 5601
Urethanes, Isocyanate3750.18D2572 SSPC TU-8
SSPC-PS Guide 17.00
Selecting
Flashpoint2106D56
D7094
1516, 1523, 3679,
3680, 13736
EN456
BS3900.A9
Viscosity1580.214D1200 Ford Cup
D4212 Dip Cup
D5125 ISO Cup
2884
Zinc Dust and/or Pigment1580-504D478 Yellow/Chromate
D521 Powder
D6580 Cured/Uncured
1249 Zn Chromate
3549 Dust
6745 Zn Phosphate
SSPC Paint 29
Compatibility with other coatings1580.404.1D5064 Patch Test SSPC-TU 3, Overcoating
Pot life, other D5201
D5682 Resistivity
9514JIS K 5600-2
NRB 15742
Coating Systems and Specifications
Structural Steel2312 Atmospheric
3750.2 U.H.B.
3750.6 Polyurethane 2K
12944SSPC PA Guide 5
(See also catalog
p. 299-308)
Primers- General3750.9 Organic Zinc
3750.13 Epoxy 2K
3750.17 Etch
3750.20 Solvent Based
D4146 Formability Test17652SSPC PA1 etc. SSPC PS Guide 7.00 Shop Painting
Primers- Inorganic Zinc Silicate3750.15
4848
D4752.10 MEK Test SSPC Paint 20, 30 etc
UNE 48293
Marine1580.481.5 TestingF718
F941
F1130 Inspection
15181 Anti Fouling
20340 Offshore
AP 941 Offshore
ABS 0049 Inspection
NACE SP0108 Offshore
SSPC-PS 19 Anti Fouling
Galvanising, Hot Dip1397 Sheets
4680 Fabricated
4791 Process
2309 Durability
A90 Thickness Test
A123 Specifications
A780 Repair
1461 Fabricated ItemsSSPC Guide 14 Repair
Thermal Metal Spray2331.3 TestingB833 Wire Specs.
C633 Adhesion
E1920 Surface Prep
E2109 Porosity
2063
2064 Thickness
NACE No 12 Specs.
SSPC CS23.00
SSPC QP6 Contractor
Qualifications AWS C2.23M
EN 15339 Safety
Fusion Bonded Epoxy [FBE]3862A972 Pipe Piling
A950 H & Sheet Piling
21809-2 Submerged PipesNACE RP0394
NACE RP 0402 Joints
Coating – Inspection
General1580
3894
D3276 Guide
D5161 Instruments
D6237 Concrete
4628SSPC-TR 4
NACE 80200
NACE RP 02 88
Inspector Qualifications3998D42289712
Reporting3894.10 Climatic
3894.11 Equipment
3894.12 Coating
3894.13 Daily Check
3894.13 Daily Painting
D3276
D5161
SSPC QS1 Records
SSPC Guide 17 Safety
Degree of visible rust1580.481.3D6104628.3
8501-1
SSPC VIS 1 Visual Standard
SSPC VIS 2 Visual Standard
Assessing Durability1580.457.1 Weathering
1580.481
D6943 Immersion
D6577 Test Methods
MIL C 48947
Assessment of Climatic Conditions3894.7E337 Psychrometer4677 Psychrometer
8502-4

DISCLAIMER: The above information does not represent nor purport to be a full nor complete nor accurate list of Australian Standards, Joint Australian/New Zealand Standards, ISO Standards or Other Standards. It is the responsibility of the reader and/or users of this information to separately determine and verify each and/or any relevant or appropriate or required or necessary or updated or accurate standards and/or their contents for any particular topic or aspect. BlastOne expressly disclaims any liability for the use or misuse of the above information.

Paints/Coatings

ReferenceAS, ASNZSASTMISOOTHER
Coating – Inspection (continued)
Blistering/Peeling1580.481.1.9/10D7144628-2JIS K 5600-8-2
Chalking1580.481.1.11D42144628-6
Wet Film / Powder Thickness1580.107
3894.3
D1212 Organic Coatings
D4414 WFT & Powder
D7378 Powder
2808NFT 30 125
Dry Film Thickness [DFT] – Non destructive [ND] 1580.108.1G12 Pipeline2178
2808
SSPC PA-2
DFT – ND – Eddy Current3894.3 Eddy CurrentB244, B499, D7091, E3762360
DFT – Destructive1580.108.2 PIG
1580.408.4
D1005 Organic Coatings
D4138 PIG
2808-5B PIG
2409 PIG
DFT – Metallic Coating2331.1A90 Galvanising
B530 Nickel Coating
B659 Metallic & Inorganic
Ultrasonic Thickness – coating and substrate2452.3 Coating
2083 Calibration
4653 Operator Qualification
D6132 Coating
E797 Substrate
12710 Instruments
18175 Performance
SSPC PA 9 Ctgs on concrete
Adhesion1580.408.2 knife
1580.408.4 cross cut
1580.408.5 pull off
C633 Thermal Spray
D3359 Tape Test
D4541 Pull Off
D6677 Knife
D7234 Concrete
2063 Metallic Ctgs
2409 Cross Cut
4624 Pull Off
16276-1 Pull Off
16276-2 Cross Cut
BS 1881.207 Concrete
DIN 1048 Concrete
EN13144 Metallic Ctgs
Continuity (Porosity/Holidays)3894.1 High Voltage
3894.2 Wet Sponge
D4787 On Concrete
D5162 On Steel
G62 Pipeline
28199.3NACE RP 0274 Pipeline
NACE TM 0384
NACE SP 01 88
NACE SP 04 90 Pipeline
Continuity (Porosity/Holidays) – Glass / Vitreous / Enamelled Stee C536
C537
2746, 8289BS 7793
1344.11
Salt Spray test2331.3.1 Metallic CtgsG85
D5894 Salt plus UV
9227
21207
Hardness/Cure1580.405 Hardness
3894.4 Cure
1580.401 Cure
D2583 Barcol Impressor
D2240 Elastomeric
D3363 Pencil Test
D5402 Solvent Resistance
D4752.10 MEK Rub Test
868 Durometer
1518 Scratch
2815 Butchholz
15184 Pencil Test
DIN 53505 Durometer
Impact Resistance1580.406D2794, D6905 Organic Ctgs
G14 Pipeline Coating
G17 Penetration
20567-2
21227-2
6272-1 Assessment
GOST R 53007
BS 3900
Gloss1580.602
3894.8
D523
D5767
2813
Surface Profile1627.4
3894.5
D4417
D7127 Stylus
3274
8503-1/2
8503-5 Testex
8503-4 Stylus
NACE RP 0287 Testex
SANS 5772
BS7079 C5 Testex

Surface Preparation – Abrasives

ReferenceAS, ASNZSASTMISOOTHER
General1627.4.2 MIL A 22262 Ship Hull
Metallic 11124 Specifications
11125 Testing
SSPC-AB3 New
SSPC-AB2 Recycled
Non Metallic (Slag/Mineral etc) 11126 Specifications
11127 Testing
SAC GB/T 17849
SSPC-AB1 Single Use
BS 7079 F10 Garnet
BS 7079 F9 Staurolite
Testing for contaminants in abrasive 1627.4.2.3.2D7393 Oil
D4940 Ionic / Chlorides
11127.7 ChloridesSSPC-AB2 Recycled Ferrous

Surface Preparation – Abrasive Blasting and Other Methods

ReferenceAS, ASNZSASTMISOOTHER
Abrasive Blasting1627.4F1330 Internal Pipe
D1730 Aluminum
8504-2
12944-4
BS 7079
NBR 7348
Abrasive Blasting – Visual/Pictorial1627.9D2200 Guide to using8501-1BS 7079-A1:SUPP1
SSPC VIS 1
(See below classes)
Coated and uncoated
before and after Blasting
– White Metal [No visible contaminants]127.4.B2.5
‘Visually Clean’
Sa 3.0SSPC-SP 5
NACE No 1
– Near White Metal [Maximum 5% staining only]127.4.B2.4
‘Very Thorough Clean’
Sa 2.5SSPC-SP 10
NACE No 2
– Commercial [Maximum 33% staining only]127.4.B2.3
‘Thorough Clean’
Sa 2.0SSPC-SP 6
NACE No 13
– Industrial [Max. 10% Adherent Contaminants remaining] - -SSPC-SP 14
NACE No 8
– Brush Off / Sweep [all loose contaminants removed]127.4.B2.2
‘Light Clean’
Sa 1.0SSPC-SP 7
NACE No 4
Water Jetting/Hydroblasting4233.1 Safety
4233.2 Equipment
E1575 Safe Practice SSPC SP WJ-3
NACE WJ-3
NACE 00615 Interpretation
NBR 7348
Water Jetting – Visual/Pictorial
Showing various grades of flash rusting
– Clean to Bare Substrate
– Very Thorough Cleaning
– Thorough Cleaning
– Light Cleaning
D2200 Guide to using8504-1 VisualSSPC VIS 4
NACE VIS 7
Both of these illustrate the below:
NACE WJ-1 Visual
NACE WJ-2 Visual
NACE WJ-3 Visual
NACE WJ-4 Visual
Wet Abrasive Blast Cleaning1627.4.3.2D5367 Inhibitors SSPC-TR 2
NACE 6G198
Wet Abrasive Blast Cleaning – Visual Showing various grades of flash rusting D2200 Guide to using SSPC VIS 5
NACE VIS 9
Hand Tool Cleaning1627.7D2200 using Visual Stds SSPC VIS 3 Visual Standard
SSPC-SP 2
Power Tool Cleaning
– Bare Metal with profile
– Commercial with profile
– Minimal, remove all loose material
1627.2D2200 using Visual Stds SSPC VIS 3 Visual Standard
SSPC-SP 11
SSPC-SP 15
SSPC-SP 3
Pickling, other1627.5 SSPC-TU 6 Chemical
Thermal Pre-cleaning NACE 6G194
SSPC SP TR-1
DIN 32539
Degreasing/Solvent Cleaning1627.1
1580.105.1
D6361 General SSPC SP1
Concrete4548D4259 Immersion
D4260 Acid Etching
D4262 PH Level
D4263 Moisture Level
D5295 Membranes
7783 Vapor TransmissionSSPC-SP 13
SSPC PA 7 Coating
SSPC-TU 10 Thick Coatings
NACE No 6
NACE 6G197
ACI 515R Practices
Concrete – Visual ICRI Tech Guideline 03732
Compressed air contaminants [oil etc] D42858573JIS B8391
Surface Cleanliness and contamination Water Soluble Salts and Chlorides1627.1
3894.6
3894.12
8502-5 Ion Tube
8502-6 Bresle
8502-9 Conductometric
TRI 5235 Effects
NACE SP0508
NACE 6G186
SSPC Guide 15 ISO 8502-10
BS 7079 B5 Ion Tube
ISO 8502-6
SANS 5770
Surface Cleanliness and Contamination Dust and other1627.1F22-13 Water Break Test8502-3 Dust on tapePSPC MSC.215(82)
PSPC MSC.244(83) SANS 5771 Millscale
Surface Cleanliness and Contamination Dust and other1627.1F22-13 Water Break Test8502-3 Dust on tapePSPC MSC.215(82)
PSPC MSC.244(83) SANS 5771 Millscale
Surface Finish, other3978A802 Steel Castings

Site Safety and Portable Equipment

ReferenceAS, ASNZSASTMISOOTHER
Electrical Installations – Site3012
Electrical Equipment – Explosive Atmosphere2381
60079
13702 Offshore
6184
EN 50014
EN 60079,
IEC 61241
Pressure Vessels1210 ASME PV CODE
Fall Arrest Systems1891F887 Climbing10333EN 353
Protective Clothing2616, 4501F2588 Mist Test14877
Confined Spaces2865D4276 ANSI Z117.1

Respiratory Protection, Dusts

ReferenceAS, ASNZSASTMISOOTHER
Respirators/Helmets1715
1716
F2704 Air Fed Respirators
WK14247 Specification
16900ANSIZ88.2
EN 143
Air Filters1324F778 Airflow Resistance EN 779
Vapors2986D6062
Dust2724, 2985D45326184 CombustiblePN91/Z-04030.06
Crystalline Silica Dust E2625 (Construction)
E1132 (General Exposure)
24095PN91/Z-04018.03
SAC GB 16225
Air Sampling1811
3580
3640
E137010882, 16000BIS IS5182
SSPC TU7 Air / Soil

Lead Paint and Containment

ReferenceAS, ASNZSASTMISOOTHER
Lead Paint Management3580.9D5702 Heavy Metals
E1728 Dust Wipes
E1864 Systems Evaluation
STP1226 Risks and Controls
6503SSPC Guide 7 Disposal
SSPC Guide 18
SSPC QP2 Contractor
Qualifications
Paint – Soluble Lead Content1580-501D3618
D4834
D3335
E1753
2745
6503
BS3900
Industrial Vacuum Cleaners60335F1977 Filtration Efficiency IEC 60335
HEPA Filters4260F147129463EN 1822
Dust Collectors SSPC Guide 16 Specification
Dehumidification NACE 6A192
SSPC TR 3
Containment Sheeting 13468 Light TransmissionBS 7955 FR Sheeting
BS EN 1263 Installation
Add to quote:
  • *If you want to build extensive quotes, multiple quotes, and save to your account, please log-in or register.
  • This field is for validation purposes and should be left unchanged.
Add to existing quote:

Add to Quote

Add to a new quote:

Send the request

BlastOne says
Thank you for submitting your quote. A sales representative will follow up with you asap.
Share Quote via Email

Share

PREVIOUS PAGE
FORWARD PAGE