My Account
Accessory Rental
Showing all 10 results
-
This general-purpose nozzle was designed for everyday use, only better - it lasts longer and offers greater ease of use! It features the following:
- Performance characteristics:
- Venturi design provides up to 40% faster production than straight bore versions.
- Thread type & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 3, 4, 5, 6, 7, 8
- Liner:
- Silicon nitride, provides longer life and lighter weight than tungsten carbide.
- Jacket:
- All-polyurethane – reduces ‘jams’ in metal nozzle holders
- Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
- Design:
- 1" throat entry on #3 and #4 Contractor thread AND all Fine thread options
- 1-¼" throat entry on #5, 6, 7, and 8 Contractor threads
- Additional notes:
- Approximately half the weight of standard tungsten carbide nozzles.
- Although the up-front cost is higher than tungsten carbide, the longer life Ultra-Tuff offers same or better total cost of ownership.
- Performance characteristics:
-
Designed with an extra-long venturi and concentrated blast pattern, the Hyper (aka XL or Saber) nozzle increases performance substantially. Additional details as follows:
- Performance characteristics:
- Up to 30% faster coating removal and/or
- Allows greater stand-off distance (reduces need to bend over when blasting tank floors, allows greater reach, etc.)
- Thread types & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 5, 6, 7, 8, & 10
- Liner:
- SiALON silicon nitride, provides longer life and lighter weight than tungsten carbide.
- Jacket:
- All aluminum, non-slip knurled finish
- Design:
- 1-¼" throat entry, extended venturi, 12 inches long
- Performance characteristics:
-
Designed with a 60% larger blast pattern, the Raptor (aka Bazooka) nozzle makes short work of your large commercial blast / sweep blast / brush blast projects. Additional details as follows:
- Thread types:
- Contractor (2") aluminum threads
- Fine (1-¼") brass threads
- Liner:
- Silicon nitride, offers lighter weight and longer life than tungsten carbide.
- Jacket:
- Urethane, for improved resistance to damage
- Design:
- 1-¼" throat entry, extended venturi
- Thread types:
-
AVAILABLE FOR RENTAL OR PURCHASE
- #1 Deadman in the industry
- Larger internal ports make it faster acting, making it a safer handle
- Compact, slimline design - 30% easier then other handles to hold down
- Simple to make in-field repairs as required
- Available as Electric or Pneumatic
- Geniune Products - Manufactured by Schmidt / Axxiom Manufacturing
-
YEAR-END SALE! BUY 1 HELMET, GET 1 HELMET FREE! SIMPLY ADD THE HELMET YOU WANT TO PURCHASE TO YOUR CART, ADD THE COUPON CODE 'HLDISCOUNT' ON YOUR CART PAGE AND SEE THE FREE HELMET AUTO-POPULATE.
- The Nova 3 Blast Helmet is the industry #1 for operator comfort
- Has comfort padding inside like a motorcycle helmet, which means it distributes the weight evenly, and also turns with your head
- Gives up to 20dB noise attenuation
- NIOSH Safety Approval with a 1000 APF (assigned protection factor)
-
Sold as a complete kit with the following variations:
-
Cape Options:
- Standard Length Nylon Cape
- Extended Nylon Cape
- Standard Leather Cape
- Extended Leather Cape
- XL Blast Jacket
- XXL Blast Jacket
-
Climate Options:
-
Supplied air offers:
- C40 Heating and Cooling
- Cool Air Tube
- Hot Air Tube
- Air Control Valve
-
PAPR offers:
- Air Control Valve only
- (PAPR version is intended for low dust applications such as pot tending, inspection, etc.)
-
Supplied air offers:
-
Cape Options:
- Genuine Products – Manufactured by RPB Safety
-
APCMF5000
Powerful Portable breathing air station with regulator
- 4 operators can use the one machine
- Not just a Carbon Monoxide monitor - this device actually removes CO, as well as odors, hydrocarbons, etc.
- Powered by two x 9 Volt batteries included
- Carbon Monoxide Monitors are normally mandated on most job sites
APCMF5000Powerful Portable breathing air station with regulator
- 4 operators can use the one machine
- Not just a Carbon Monoxide monitor - this device actually removes CO, as well as odors, hydrocarbons, etc.
- Powered by two x 9 Volt batteries included
- Carbon Monoxide Monitors are normally mandated on most job sites
-
AVAILABLE FOR RENTAL OR PURCHASE
- The Western Technology 3475 is the #1 Nozzle Mounted Blast Light preferred by Blasting Contractors
- Powerful 1,325 lumen LED light array
- Can be hose mounted (with stanchion) or hand-held
- Multiple configurations available
- Light with 10' cable (unfitted)
- Light with 50-300' cable, fitted with one of the following
- 12-28v Battery Alligator Clips
- 110v Transformer and standard 110v plug
- Mini 3116 twist-lock plugs (use with the optional Western Technology 4-outlet transformer)
- Genuine Products - Manufactured by Western Technology
Note: The Western Technology blast light is designed to last and is very durable. Accidents or abuse may necessitate repairs however, and if a light needs repair, it must be conducted at BlastOne. Cost to estimate repair is ½ Hour labor (refundable with completion of repair). When a light is repairable, ballpark cost would be $750 due to the cost of the component assemblies. Contact Customer Service at 1-800-999-1881 to coordinate inspection/repair of your lights.
-
AVAILABLE FOR RENTAL OR PURCHASE
- LED explosion proof mountable area light
- Kick-it-tough design to outlast brutal onsite treatment from contractors
- Comes with explosion proof cable
- Approved for: Class 1, Div 1 & 2; Groups C & D
- Suitable for wet location use
- LEDs color: ~6000K, CRI >70
- Weight: 10 lbs (light head only)
- Genuine Parts - Manufactured by Western Technology
-
- Highly Portable and Explosion Proof LED Blast Light
- Can be used as a mounted area light or a hand held light
- Suitable for Hazardous and Wet Locations
- Class I, Div 1 & 2 and Class II, Div 1 & 2 Rated
- Smaller version of the Brick Light
- #1 preferred area light for travelling blasters and painters
- Stringer and Medusa light packages available - Made to order only
- Genuine Parts - Manufactured by Western Technology
-
- 1st in the World to be ETL Certified • Rechargeable
- Durable Kick-it Tough design
- LED blast rated light
- 2500 lumens when on high
- Class 1, Div. 1&2, Class 2, Div. 1&2 rated
- Option for a UV light which is ideal for inspections
- Suitable for hazardous and wet locations
- Comes in a complete kit with charger and carry case
- Made in USA by Western Technology
