My Account
Painting
Showing 121–135 of 318 results
-
IPC80300- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
IPC80300- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
-
INEBP45
- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
INEBP45- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
-
IPC80125
- Heavy-duty coating unit
- Ideal for use on 3"-5" (75mm-125mm) pipe internals
- Centering carriage, spray tip and shut-off valve included
- Pressured rated = 3,600psi
- Fastens directly to high-pressure (HP) airless spray pump
IPC80125- Heavy-duty coating unit
- Ideal for use on 3"-5" (75mm-125mm) pipe internals
- Centering carriage, spray tip and shut-off valve included
- Pressured rated = 3,600psi
- Fastens directly to high-pressure (HP) airless spray pump
-
From the makers of the Nova Respirators!
- GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 10 per case, with case discount
- Multiple filter versions available as follows:
- Standard P100. These filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns.
- Standard P100 Starter Kit. Same as above along with a hard carry case and extra set of filters included.
- Enhanced P100 w/activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- Standard P100 Source Control. Designed for healthcare market and reduces cost and waste as compared to N95 disposable masks. Side exhaust valves removed.
- Reuse your respirator over and over again with the low-profile line of GVS replacement filters.
- NIOSH Approved TC-84A-8062.
NOTE - This is the low-profile series. Standard-profile Elipse Masks (which offers Acid Gas & Multi-Gas filter options) are also available.
As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.
-
From the makers of the Nova Respirators!
- GVS Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 5 per case, with case discount.
- Multiple filter versions available as follows:
- Standard P100
- Enhanced P100 w/Nuisance Odor control
- OV / P100 - P100 Organic Vapor protection. Painters favorite!
- Reuse your respirator by using the low-profile line of GVS replacement filters, which include a pre-filter option which extends the life of the OV / P100 filter.
- NIOSH Approved goggles provide ANSI Z87+ eye protection.
- Goggles are scratch and fog resistant. Tear-off lenses available separately to keep them clean while spraying
NOTE - This is the low-profile series with enhanced field of vision. Standard-profile Integra Masks (which offer Acid Gas & Multi-Gas filter options) are also available.
Your regular eyeglasses will not fit under these goggles. However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.
As with all close-fitting respirators, these are designed to be used where fit testing is conducted. The GVS Portacount Adaptor is available to facilitate this testing.
-
From the makers of the Nova Respirators!
- GVS Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 4 per case, with case discount.
- Multiple filter versions available as follows:
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gasses. All acid gases above, plus:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine
- Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
- Keep your respirator fresh with the standard-profile line of GVS replacement filters.
- NIOSH Approved with ANSI Z87+ eye protection
- Goggles are scratch and fog resistant. Tear-off lenses available separately to keep them clean while spraying.
NOTE - This is the standard-profile series, which has the largest variety of protective filters. Low-profile Integra Masks (which offer an enhanced field of vision) are also available.
Your regular eyeglasses will not fit under these goggles. However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.
As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adaptor is available to facilitate this testing.
-
- #1 mask used by painters in USA
- Comfortable, lightweight and durable mask.
- Low Breathing resistance
- Filters available for gas and particulate protection.
- Genuine Parts - Manufactured by 3M Safety
-
Replacement filter cartridges to suit GVS Elipse and Integra Standard-Profile half-masks.
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- OV / P100. Protects against organic gases and particulates.
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases.
- Multi-Gas P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
-
This safety glove offers robust protection against common hazards and is constructed of breathable 13 gauge HPPE with high-vis TPR rubber backing. It offers the following protections:
- Impact. ANSI Level 2
- Cut. ANSI Level 5
- Puncture. ANSI Level 5
- Abrasion. ANSI Level 5
-
From the makers of the Nova Respirators!
- GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 8 per case, with case discount.
- Multiple filter versions available as follows:
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases. All acid gases above, plus:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine
- Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
- Reuse your respirator over and over again with the standard-profile line of GVS replacement filters.
- NIOSH Approved TC-84A-8062.
NOTE - This is the standard profile series. Low-profile Elipse masks are also available.
As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.
-
This two-toned glove is constructed of neoprene and rubber, and is double dipped for added protection. It has the following specifications:
- 27 mil thickness - medium weight for greater protection against mechanical hazards
- Cotton Flock lined for sweat absorption
- Diamond-pattern finish for improved grip on both wet and dry surfaces
- Intended for plant maintenance, janitorial use, and general chemical handling. See Documents tab for chemical protection chart.
-
This all-purpose knit glove offers excellent cut resistance with good dexterity and grip. It has the following specifications:
- ANSI cut level A6
- NBR foam finish
- 13 gauge gray HPPE (Steel / Nylon / Spandex / Polyester) knit construction
- Black palm dip
-
This knit glove is an excellent general purpose glove with good dexterity and grip. It has the following specifications:
- ANSI cut level 1
- NBR foam finish
- 15 gauge gray Nylon / Spandex knit construction
- Black palm dip
-
HAB20TICHThe Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.
- Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
- Made from Tychem QC for superior chemical splash protection
- Wide-angle lens for industry-leading visibility
- Patented inflatable neck cuff design for comfort and airflow
- Reusable yet economical for varied application needs
- NIOSH certified for safety and reliability
HAB20TICHThe Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.- Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
- Made from Tychem QC for superior chemical splash protection
- Wide-angle lens for industry-leading visibility
- Patented inflatable neck cuff design for comfort and airflow
- Reusable yet economical for varied application needs
- NIOSH certified for safety and reliability
-
In-Helmet communication systems make communication between a blaster/operator and other team members much easier and safer. RPB respirators are modular, meaning they can be upfitted with this option at any time. Several options available as follows:
- Z4 Comms-Link™ Upgrade Kit, includes noise-cancelling microphone, PTT button, and 15-848 padding kit for the Z4.
- Z-Link / T-Link Comms-Link™ Upgrade Kit, includes noise cancelling microphone, PTT button, and 16-520-S padding kit to fit either the Z-Link or T-Link.
- Z-Link / T-Link / Z4 Headset Package, includes noise-cancelling microphone and PTT button. This kit does not include padding, and assumes that it will be used with previously-installed padding. (If you need padding with the kit, purchase one of the Upgrade versions above. It can also be purchased separately - see Repair Parts list.)
- Nova 3 NovaTalk™ Upgrade Kit, including noise-cancelling microphone, PTT button, and padding for the Nova 3.
- Nova 2000 NovaTalk™ Upgrade Kit. Including noise-cancelling microphone, PTT button, and padding for the 2000.
- NovaTalk™ R-Tex Headset with PTT, designed for high-noise applications, such as Pot Tender.
- NovaTalk™ R-Tex Headset without PTT, designed for high-noise applications, such as Pot Tender.
Note: A separate Radio Connection Cable must be purchased to connect to your existing 2-way radio system. Note: These systems are not rated Intrinsically Safe. If Intrinsically Safe versions are required, contact us for availability and pricing.
