My Account
Internal Pipe (ID) System Components
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 16–26 of 26 results
-
IPC4005Replacement part for Coneblast. Note - this is 1 of 2 required - see IPC4004 for the other one.IPC4005Replacement part for Coneblast. Note - this is 1 of 2 required - see IPC4004 for the other one. -
IPC4003Replacement parts for ConeBlast Internal Pipe Blaster. Includes Throat Rod as shown. NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C.IPC4003Replacement parts for ConeBlast Internal Pipe Blaster. Includes Throat Rod as shown. NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C. -
IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster. Includes throat rod as shown. NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003.IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster. Includes throat rod as shown. NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003. -
IPC4004Replacement part for ConeBlast Note: This is one of two that are required - see IPC4005 for the other one.IPC4004Replacement part for ConeBlast Note: This is one of two that are required - see IPC4005 for the other one. -
IPC1008The RB-6A 1-3/8" cast tube (SKU: IPC1008, MPN: 502061) is a replacement wear sleeve for the IPC1000 Internal Pipe Blaster (Rotorblast). It installs in the middle of the main housing, and the rotating head attaches to it.
- Product: RB-6A 1-3/8" Wear Sleeve
- SKU: IPC1008
- MPN: 502061
- Size: 1-3/8"
- Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
IPC1008The RB-6A 1-3/8" cast tube (SKU: IPC1008, MPN: 502061) is a replacement wear sleeve for the IPC1000 Internal Pipe Blaster (Rotorblast). It installs in the middle of the main housing, and the rotating head attaches to it.
- Product: RB-6A 1-3/8" Wear Sleeve
- SKU: IPC1008
- MPN: 502061
- Size: 1-3/8"
- Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
-
IPC1003The RB-3 Brake Housing (SKU: IPC1003, MPN: 502030) is the replacement brake housing for the IPC1000 Internal Pipe Blaster (Rotorblast). It serves as the mounting point for the RB-5 Brake and is used when the original housing is worn or damaged.
- Product: RB-3 Brake Housing
- SKU: IPC1003
- MPN: 502030
- Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
- Function: RB-5 Brake mounts to this RB-3 housing
IPC1003The RB-3 Brake Housing (SKU: IPC1003, MPN: 502030) is the replacement brake housing for the IPC1000 Internal Pipe Blaster (Rotorblast). It serves as the mounting point for the RB-5 Brake and is used when the original housing is worn or damaged.
- Product: RB-3 Brake Housing
- SKU: IPC1003
- MPN: 502030
- Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
- Function: RB-5 Brake mounts to this RB-3 housing
-
IPC1015The RB-11 Rear End Plate is a replacement rear end plate for the IPC1000 RotorBlast. It mounts at the rear of the main housing assembly to support correct component retention and alignment for reliable operation.
- Replacement RB-11 Rear End Plate for IPC1000 RotorBlast
- Rear housing/end plate component used in the RotorBlast assembly stack
- Supports proper retention and alignment of rear-end components
- Replace when cracked, worn, distorted, or during rear-end rebuild service
- SKU: IPC1015 | MPN: 502110
IPC1015The RB-11 Rear End Plate is a replacement rear end plate for the IPC1000 RotorBlast. It mounts at the rear of the main housing assembly to support correct component retention and alignment for reliable operation.
- Replacement RB-11 Rear End Plate for IPC1000 RotorBlast
- Rear housing/end plate component used in the RotorBlast assembly stack
- Supports proper retention and alignment of rear-end components
- Replace when cracked, worn, distorted, or during rear-end rebuild service
- SKU: IPC1015 | MPN: 502110
-
IPC1200- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 10" and 35" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
IPC1200- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 10" and 35" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
-
IPC4002H- Extended Life replacement tip for the ConeBlast Internal Pipe Blasting tool
- Boron Carbide composition
- Recommended for longer-run projects or any project using an aggressive media type
- Lower-cost IPC4002 option available if extended life is not required
IPC4002H- Extended Life replacement tip for the ConeBlast Internal Pipe Blasting tool
- Boron Carbide composition
- Recommended for longer-run projects or any project using an aggressive media type
- Lower-cost IPC4002 option available if extended life is not required
-
BNATC360CTIP- Replacement Tungsten Carbide Deflector Tip for BNATC360C internal pipe blasting nozzle.
- Ensures optimal blasting efficiency and durability.
BNATC360CTIP- Replacement Tungsten Carbide Deflector Tip for BNATC360C internal pipe blasting nozzle.
- Ensures optimal blasting efficiency and durability.
Part Number Purchase Price BNATC360CTIP $240.69 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$240.69
-
-
IPC4002- Replacement tip for the ConeBlast Internal Pipe Blasting Tool
- Tungsten carbide composition
- Recommended for short-run projects or projects using less aggressive media types
- If tips with longer life are needed, use the IPC4002H version
IPC4002- Replacement tip for the ConeBlast Internal Pipe Blasting Tool
- Tungsten carbide composition
- Recommended for short-run projects or projects using less aggressive media types
- If tips with longer life are needed, use the IPC4002H version
Enhance the efficiency and performance of your internal pipe cleaning operations with our wide range of Internal Pipe (ID) System Components. From RotorBlast and Spinblast replacement parts to specialized components like high-wear deflector tips and stem support assemblies, we have everything you need to keep your equipment running smoothly. Our products are designed to withstand the harsh conditions of industrial environments, ensuring long-lasting durability and reliability. Explore our selection to find the right parts for your internal pipe cleaning tools and maintain optimal performance.