My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 166–180 of 381 results
-
KA018- Toggle Actuator for Pneumatic Remote Abrasive Cut-Off
- 1/8"
KA018- Toggle Actuator for Pneumatic Remote Abrasive Cut-Off
- 1/8"
-
BA01998BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer for the 1-½" Inlet Valve (factory number 01998).
BA01998BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer for the 1-½" Inlet Valve (factory number 01998).
-
- European-style remote controls
- 1-1/4" (32mm) thread inlet valve
- 3/4" (19mm) thread ported exhaust valve
- Available as an integrated inlet/exhaust assembly
- Supplied standard as separate valves for simplified installation and ease of maintenance
- Service repair kit includes seals, gaskets, etc. to service both the inlet and exhaust valve
- Optional service kit #2 also includes exhaust deflector plate and gasket
- Recommended replacement is the Combo Valve System- DM2223RK00
-
Part Number Purchase Price DM222300001 $117.42 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$117.42
-
-
DMPYT400- Piston-operated valve
- 1/4" female NPT supply air connection
- Effortless activation via deadman control handle
- Guide tubes ensure consistent plunger travel
- Eliminate repressurization down time profit loss
DMPYT400- Piston-operated valve
- 1/4" female NPT supply air connection
- Effortless activation via deadman control handle
- Guide tubes ensure consistent plunger travel
- Eliminate repressurization down time profit loss
-
DMRGNE2099RGNE Electric Switch with a 300mm CordDMRGNE2099RGNE Electric Switch with a 300mm CordPart Number Purchase Price DMRGNE2099 $164.68 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$164.68
-
-
Combining with the deadman, these control valves (aka pilot valves or deadman valves) are available in either pneumatic or electric.
- Uses an electric or pneumatic charge to push over the shuttle which opens ports to control the deadman system
- Provides sharp, clean and rapid response
- Improves safety
- Installs between twinline and inlet valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
- Uses an electric or pneumatic charge to push over the shuttle which opens ports to control the deadman system
-
BA02006BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the remote control inlet valve (factory part number 02006).BA02006BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the remote control inlet valve (factory part number 02006). -
DMRMCVEBKBlastOne has the parts to maintain your Clemco® blast equipment. This aftermarket rebuild kit for the piston outlet valve (replaces factory part number 01928) includes the following:
- Plug Washers (2)
- Valve Plug
- Compression Spring
- Plug Washer Retainer
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
DMRMCVEBKBlastOne has the parts to maintain your Clemco® blast equipment. This aftermarket rebuild kit for the piston outlet valve (replaces factory part number 01928) includes the following:
- Plug Washers (2)
- Valve Plug
- Compression Spring
- Plug Washer Retainer
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
-
DMRMCVIBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
DMRMCVIBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
-
Part Number Purchase Price DMWTXEDIODE $13.11 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$13.11
-
-
BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002). -
BAWF8012- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
BAWF8012- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
-
BA7046003- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA7046003- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
AFPRGUC200RE- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
AFPRGUC200RE- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
Part Number Purchase Price AFPRGUC200RE $75.13 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$75.13
-
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.