My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 106–120 of 381 results
-
IPC1007The RB-5 Brake (SKU: IPC1007, MPN: 502050) is the replacement brake for the IPC1000 Internal Pipe Blaster (Rotorblast). It mounts to the RB-3 Brake Housing and is used to restore proper braking control when the original brake is worn or damaged.
- Product: RB-5 Replacement Brake
- SKU: IPC1007
- MPN: 502050
- Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
- Mounting: Mounts to RB-3 Brake Housing
IPC1007The RB-5 Brake (SKU: IPC1007, MPN: 502050) is the replacement brake for the IPC1000 Internal Pipe Blaster (Rotorblast). It mounts to the RB-3 Brake Housing and is used to restore proper braking control when the original brake is worn or damaged.
- Product: RB-5 Replacement Brake
- SKU: IPC1007
- MPN: 502050
- Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
- Mounting: Mounts to RB-3 Brake Housing
-
IPC1009The RB-8 Bearing (SKU: IPC1009, MPN: 502080) is a replacement bearing for the IPC1000 Internal Pipe Blaster (Rotorblast). Two RB-8 bearings are required per unit—one installed in each end of the main housing—to support proper rotation and alignment.
- Product: RB-8 Bearing
- SKU: IPC1009
- MPN: 502080
Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
IPC1009The RB-8 Bearing (SKU: IPC1009, MPN: 502080) is a replacement bearing for the IPC1000 Internal Pipe Blaster (Rotorblast). Two RB-8 bearings are required per unit—one installed in each end of the main housing—to support proper rotation and alignment.
- Product: RB-8 Bearing
- SKU: IPC1009
- MPN: 502080
Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
-
IPC1013The RB-10 Leather Dust Seal is a standard replacement dust seal for the IPC1000 RotorBlast inlet-side bearing area. Made in leather, it helps block abrasive dust and debris from reaching the bearing during operation.
- Standard leather dust seal for IPC1000 RotorBlast
Protects the inlet-side bearing area from abrasive dust and contamination
Replace during bearing service or when the seal is worn, torn, or hardened
- SKU: IPC1013 | MPN: 502100
Note: The IPC1013A / RB-10.2 is an alternative Teflon version available when extended life seals are needed.
IPC1013The RB-10 Leather Dust Seal is a standard replacement dust seal for the IPC1000 RotorBlast inlet-side bearing area. Made in leather, it helps block abrasive dust and debris from reaching the bearing during operation.
- Standard leather dust seal for IPC1000 RotorBlast
Protects the inlet-side bearing area from abrasive dust and contamination
Replace during bearing service or when the seal is worn, torn, or hardened
- SKU: IPC1013 | MPN: 502100
Note: The IPC1013A / RB-10.2 is an alternative Teflon version available when extended life seals are needed.
-
IPC1002The RB-II-1-3/8" Rotating Head Assembly (SKU: IPC1002, MPN: 502011) is a replacement rotating head assembly for the IPC1000 Rotorblast (Internal Pipe Blaster). It holds the nozzles (not included) and provides the 360 degree blast coverage on pipe internals.
- SKU: IPC1002
- MPN: 502011
- Fits: IPC1000 Rotorblast (Internal Pipe Blaster) w/ 1-3/8" thread
- Replacement rotating head assembly to maintain consistent rotation and coverage
- Common service replacement when rotation becomes inconsistent or performance drops
IPC1002The RB-II-1-3/8" Rotating Head Assembly (SKU: IPC1002, MPN: 502011) is a replacement rotating head assembly for the IPC1000 Rotorblast (Internal Pipe Blaster). It holds the nozzles (not included) and provides the 360 degree blast coverage on pipe internals.
- SKU: IPC1002
- MPN: 502011
- Fits: IPC1000 Rotorblast (Internal Pipe Blaster) w/ 1-3/8" thread
- Replacement rotating head assembly to maintain consistent rotation and coverage
- Common service replacement when rotation becomes inconsistent or performance drops
-
IPC1018The RB-13 Rubber-Lined Nipple is a replacement inlet-side nipple for the IPC1000 internal pipe blaster (RotorBlast). Rubber lining helps protect the connection from abrasive wear where blasting media enters the unit.
- Replacement RB-13 nipple for IPC1000 RotorBlast
- Installs on the inlet side of the internal pipe blaster
- Rubber-lined to help resist abrasive wear at the inlet
- Common service item when inlet fittings show internal erosion or leakage
- SKU: IPC1018 | MPN: 502130
IPC1018The RB-13 Rubber-Lined Nipple is a replacement inlet-side nipple for the IPC1000 internal pipe blaster (RotorBlast). Rubber lining helps protect the connection from abrasive wear where blasting media enters the unit.
- Replacement RB-13 nipple for IPC1000 RotorBlast
- Installs on the inlet side of the internal pipe blaster
- Rubber-lined to help resist abrasive wear at the inlet
- Common service item when inlet fittings show internal erosion or leakage
- SKU: IPC1018 | MPN: 502130
-
IPC1013AThe RB-10 Teflon Dust Seal is an extended-life replacement dust seal for the IPC1000 RotorBlast inlet-side bearing area. Made from Teflon for improved wear resistance, it helps block abrasive dust and debris from reaching the bearing during operation.
- Extended-life RB-10.2 dust seal for IPC1000 RotorBlast
- Teflon construction for improved wear resistance in abrasive environments
- Protects the inlet-side bearing area from dust and contamination
- Ideal upgrade when seeking longer service intervals vs. standard leather dust seals
- SKU: IPC1013A | MPN: 502101
IPC1013AThe RB-10 Teflon Dust Seal is an extended-life replacement dust seal for the IPC1000 RotorBlast inlet-side bearing area. Made from Teflon for improved wear resistance, it helps block abrasive dust and debris from reaching the bearing during operation.
- Extended-life RB-10.2 dust seal for IPC1000 RotorBlast
- Teflon construction for improved wear resistance in abrasive environments
- Protects the inlet-side bearing area from dust and contamination
- Ideal upgrade when seeking longer service intervals vs. standard leather dust seals
- SKU: IPC1013A | MPN: 502101
-
IPC1011The RB-7 Tube Lock Ring is a replacement retaining ring used in the IPC1000 RotorBlast tube and housing assembly. It locks the RB-6 tube in place inside the RB-15 housing to help prevent tube movement during operation.
- Replacement lock ring for the IPC1000 RotorBlast tube and housing stack
- Secures the RB-6 tube within the RB-15 housing
- Helps maintain correct tube retention during blasting operations
- Use when servicing a loose, worn, or damaged tube retention point
- Confirm assembly condition during replacement (tube seating and housing engagement)
- SKU: IPC1011 | MPN: 502070
IPC1011The RB-7 Tube Lock Ring is a replacement retaining ring used in the IPC1000 RotorBlast tube and housing assembly. It locks the RB-6 tube in place inside the RB-15 housing to help prevent tube movement during operation.
- Replacement lock ring for the IPC1000 RotorBlast tube and housing stack
- Secures the RB-6 tube within the RB-15 housing
- Helps maintain correct tube retention during blasting operations
- Use when servicing a loose, worn, or damaged tube retention point
- Confirm assembly condition during replacement (tube seating and housing engagement)
- SKU: IPC1011 | MPN: 502070
-
IPC1014The RB-12 Washer is a tungsten carbide replacement washer for the IPC1000 RotorBlast rear end assembly. It mounts on the back side of the RB-11 rear end plate and provides a durable wear surface suited for abrasive service conditions.
- Tungsten carbide washer for high-wear rear end plate area
- Located on the back of the RB-11 rear end plate
- Designed for durability in abrasive environments
- OEM replacement part for IPC1000 RotorBlast service
- SKU: IPC1014 | MPN: 502120
IPC1014The RB-12 Washer is a tungsten carbide replacement washer for the IPC1000 RotorBlast rear end assembly. It mounts on the back side of the RB-11 rear end plate and provides a durable wear surface suited for abrasive service conditions.
- Tungsten carbide washer for high-wear rear end plate area
- Located on the back of the RB-11 rear end plate
- Designed for durability in abrasive environments
- OEM replacement part for IPC1000 RotorBlast service
- SKU: IPC1014 | MPN: 502120
-
IPC4005Replacement part for Coneblast. Note - this is 1 of 2 required - see IPC4004 for the other one.IPC4005Replacement part for Coneblast. Note - this is 1 of 2 required - see IPC4004 for the other one. -
IPC4003Replacement parts for ConeBlast Internal Pipe Blaster. Includes Throat Rod as shown. NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C.IPC4003Replacement parts for ConeBlast Internal Pipe Blaster. Includes Throat Rod as shown. NOTE - If you have the Clemco brand HolloBlast version, the correct part number to use for this is IPC4003C. -
IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster. Includes throat rod as shown. NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003.IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster. Includes throat rod as shown. NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003. -
IPC4004Replacement part for ConeBlast Note: This is one of two that are required - see IPC4005 for the other one.IPC4004Replacement part for ConeBlast Note: This is one of two that are required - see IPC4005 for the other one. -
BlastOne offers a full selection of industrial fittings. This group is the Hex Nipples. Other information is as follows:- NPTF Male Threads
- Both standard and reducer versions available
- Operating Pressure Range: 1000 PSI
- Operating Temperature Range: -65 to 250F
-
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
-
BlastOne offers a full selection of industrial fittings. This group is the Hose Barb x Female Pipe Swivel (Ball Seat), or aka “Nut & Tail”. Other information is as follows:- Hose Barb (aka Hose tail) x NPSM FPX Female Swivel
- aka “Nut and Tail”
- First dimension is hose ID for hose barb
- Use with crimp ferrules or worm gear clamps
- Applications: Low Pressure SAE general service air, water, and hydraulic hose
- Operating Pressure Range: 250 PSI maximum at 72F
- Operating Temperature Range: -40 to 160F at 150 PSI max
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.