My Account
Blasting, UHP & Site Equipment
Blast Equipment
Blast Nozzles
Blast Equipment Parts
Blast / Air Hose & Couplings
Portable Lighting
Air Dryers
Ventilation & Other Field Equipment
UHP & Pressure Washing Equipment
Showing 226–240 of 646 results
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.- This group is Type F version, with male adapter coupling and male NPT thread
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum version shown.
- Other materials are available - inquire.
-
- Popular choice to secure fittings to vacuum hoses.
- Can be used on many other applications.
- Constructed of zinc-plated ductile iron.
-
Secure your Fittings onto your vac hose with these spiral clamps.- CopperVac vac hoses have Counter Clockwise helixes
- Most Kuriyama Tigerflex vac hoses (except TR1) are also Counter Clockwise
- ContiTech vac hoses can be either.
- If unsure, here is how to determine which direction your hose is:
- Look at either end of your hose and find the exposed helix cord.
- Starting from the helix, follow which way the winding goes down the hose.
-
Improve your vacuum performance with industrial-grade tools.
- Vacuum Tools
- Designed for use with industrial vacuums
- Available for various sizes of vac hose
- Optional handles / wheels available for the bulk tool
Contact us for info on other types / sizes.
-
- Premium Deadman Technology
- Comfortable to hold - increases operator compliance
- Available as Electric or Pneumatic in 2 configurations each:
- 2-position (on/off) version
- 3-position version with the following:
- Position 1 - Air Off / Abrasive Off
- Position 2 - Air On / Abrasive Off (for blowing off)
- Position 3 - Air On / Abrasive On (for blasting)
- This handle can be used with any blast control setup, but comes standard with each new BAABS deadman system purchase - see here for the main BAABS page.
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
-
IPC1099The RB-31 Rebuild Kit is a comprehensive rebuild parts kit for the 1-3/8" version of the IPC1000 RotorBlast (Internal Pipe Blaster). It combines key wear components and assemblies commonly replaced during a full service to restore reliable operation and reduce downtime.
- Rebuild kit for the 1-3/8" IPC1000 RotorBlast (Internal Pipe Blaster)
- Includes wear items, bearings, seals, and major internal components
- Ideal for scheduled overhauls and high-hour service intervals
- Helps streamline maintenance by bundling frequently replaced parts
- SKU: IPC1099 | MPN: 502351
Note: Nozzles are not included in this kit but should be checked for wear when rebuilding the unit, and replaced when worn. The AT Nozzles are used on pipes under 12" ID. ASB Nozzles are used on pipes between 12" and 35" ID.
IPC1099The RB-31 Rebuild Kit is a comprehensive rebuild parts kit for the 1-3/8" version of the IPC1000 RotorBlast (Internal Pipe Blaster). It combines key wear components and assemblies commonly replaced during a full service to restore reliable operation and reduce downtime.
- Rebuild kit for the 1-3/8" IPC1000 RotorBlast (Internal Pipe Blaster)
- Includes wear items, bearings, seals, and major internal components
- Ideal for scheduled overhauls and high-hour service intervals
- Helps streamline maintenance by bundling frequently replaced parts
- SKU: IPC1099 | MPN: 502351
Note: Nozzles are not included in this kit but should be checked for wear when rebuilding the unit, and replaced when worn. The AT Nozzles are used on pipes under 12" ID. ASB Nozzles are used on pipes between 12" and 35" ID.
-
IPC1012The RB-9 Bearing Seal is a replacement bearing seal fitted to the RB-15-A bearing housing on the inlet side of the IPC1000 RotorBlast Internal Pipe Blaster. It helps protect the bearing area by limiting abrasive and contaminant ingress in high-wear internal pipe blasting environments.
- Bearing seal fitted to the RB-15-A bearing housing (inlet side)
- Part ID: RB-9
- Helps keep abrasive, dust, and debris out of the bearing area
- Replace during rebuilds or when the seal shows wear, damage, or leakage
- Common service spare for preventive maintenance and reduced downtime
- Note: SKU IPC1012, MPN 502090
IPC1012The RB-9 Bearing Seal is a replacement bearing seal fitted to the RB-15-A bearing housing on the inlet side of the IPC1000 RotorBlast Internal Pipe Blaster. It helps protect the bearing area by limiting abrasive and contaminant ingress in high-wear internal pipe blasting environments.
- Bearing seal fitted to the RB-15-A bearing housing (inlet side)
- Part ID: RB-9
- Helps keep abrasive, dust, and debris out of the bearing area
- Replace during rebuilds or when the seal shows wear, damage, or leakage
- Common service spare for preventive maintenance and reduced downtime
- Note: SKU IPC1012, MPN 502090
-
IPC1007The RB-5 Brake (SKU: IPC1007, MPN: 502050) is the replacement brake for the IPC1000 Internal Pipe Blaster (Rotorblast). It mounts to the RB-3 Brake Housing and is used to restore proper braking control when the original brake is worn or damaged.
- Product: RB-5 Replacement Brake
- SKU: IPC1007
- MPN: 502050
- Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
- Mounting: Mounts to RB-3 Brake Housing
IPC1007The RB-5 Brake (SKU: IPC1007, MPN: 502050) is the replacement brake for the IPC1000 Internal Pipe Blaster (Rotorblast). It mounts to the RB-3 Brake Housing and is used to restore proper braking control when the original brake is worn or damaged.
- Product: RB-5 Replacement Brake
- SKU: IPC1007
- MPN: 502050
- Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
- Mounting: Mounts to RB-3 Brake Housing
-
IPC1009The RB-8 Bearing (SKU: IPC1009, MPN: 502080) is a replacement bearing for the IPC1000 Internal Pipe Blaster (Rotorblast). Two RB-8 bearings are required per unit—one installed in each end of the main housing—to support proper rotation and alignment.
- Product: RB-8 Bearing
- SKU: IPC1009
- MPN: 502080
Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
IPC1009The RB-8 Bearing (SKU: IPC1009, MPN: 502080) is a replacement bearing for the IPC1000 Internal Pipe Blaster (Rotorblast). Two RB-8 bearings are required per unit—one installed in each end of the main housing—to support proper rotation and alignment.
- Product: RB-8 Bearing
- SKU: IPC1009
- MPN: 502080
Fits: IPC1000 Internal Pipe Blaster (Rotorblast)
-
IPC1013The RB-10 Leather Dust Seal is a standard replacement dust seal for the IPC1000 RotorBlast inlet-side bearing area. Made in leather, it helps block abrasive dust and debris from reaching the bearing during operation.
- Standard leather dust seal for IPC1000 RotorBlast
Protects the inlet-side bearing area from abrasive dust and contamination
Replace during bearing service or when the seal is worn, torn, or hardened
- SKU: IPC1013 | MPN: 502100
Note: The IPC1013A / RB-10.2 is an alternative Teflon version available when extended life seals are needed.
IPC1013The RB-10 Leather Dust Seal is a standard replacement dust seal for the IPC1000 RotorBlast inlet-side bearing area. Made in leather, it helps block abrasive dust and debris from reaching the bearing during operation.
- Standard leather dust seal for IPC1000 RotorBlast
Protects the inlet-side bearing area from abrasive dust and contamination
Replace during bearing service or when the seal is worn, torn, or hardened
- SKU: IPC1013 | MPN: 502100
Note: The IPC1013A / RB-10.2 is an alternative Teflon version available when extended life seals are needed.
-
IPC1002The RB-II-1-3/8" Rotating Head Assembly (SKU: IPC1002, MPN: 502011) is a replacement rotating head assembly for the IPC1000 Rotorblast (Internal Pipe Blaster). It holds the nozzles (not included) and provides the 360 degree blast coverage on pipe internals.
- SKU: IPC1002
- MPN: 502011
- Fits: IPC1000 Rotorblast (Internal Pipe Blaster) w/ 1-3/8" thread
- Replacement rotating head assembly to maintain consistent rotation and coverage
- Common service replacement when rotation becomes inconsistent or performance drops
IPC1002The RB-II-1-3/8" Rotating Head Assembly (SKU: IPC1002, MPN: 502011) is a replacement rotating head assembly for the IPC1000 Rotorblast (Internal Pipe Blaster). It holds the nozzles (not included) and provides the 360 degree blast coverage on pipe internals.
- SKU: IPC1002
- MPN: 502011
- Fits: IPC1000 Rotorblast (Internal Pipe Blaster) w/ 1-3/8" thread
- Replacement rotating head assembly to maintain consistent rotation and coverage
- Common service replacement when rotation becomes inconsistent or performance drops
-
IPC1018The RB-13 Rubber-Lined Nipple is a replacement inlet-side nipple for the IPC1000 internal pipe blaster (RotorBlast). Rubber lining helps protect the connection from abrasive wear where blasting media enters the unit.
- Replacement RB-13 nipple for IPC1000 RotorBlast
- Installs on the inlet side of the internal pipe blaster
- Rubber-lined to help resist abrasive wear at the inlet
- Common service item when inlet fittings show internal erosion or leakage
- SKU: IPC1018 | MPN: 502130
IPC1018The RB-13 Rubber-Lined Nipple is a replacement inlet-side nipple for the IPC1000 internal pipe blaster (RotorBlast). Rubber lining helps protect the connection from abrasive wear where blasting media enters the unit.
- Replacement RB-13 nipple for IPC1000 RotorBlast
- Installs on the inlet side of the internal pipe blaster
- Rubber-lined to help resist abrasive wear at the inlet
- Common service item when inlet fittings show internal erosion or leakage
- SKU: IPC1018 | MPN: 502130
-
IPC1013AThe RB-10 Teflon Dust Seal is an extended-life replacement dust seal for the IPC1000 RotorBlast inlet-side bearing area. Made from Teflon for improved wear resistance, it helps block abrasive dust and debris from reaching the bearing during operation.
- Extended-life RB-10.2 dust seal for IPC1000 RotorBlast
- Teflon construction for improved wear resistance in abrasive environments
- Protects the inlet-side bearing area from dust and contamination
- Ideal upgrade when seeking longer service intervals vs. standard leather dust seals
- SKU: IPC1013A | MPN: 502101
IPC1013AThe RB-10 Teflon Dust Seal is an extended-life replacement dust seal for the IPC1000 RotorBlast inlet-side bearing area. Made from Teflon for improved wear resistance, it helps block abrasive dust and debris from reaching the bearing during operation.
- Extended-life RB-10.2 dust seal for IPC1000 RotorBlast
- Teflon construction for improved wear resistance in abrasive environments
- Protects the inlet-side bearing area from dust and contamination
- Ideal upgrade when seeking longer service intervals vs. standard leather dust seals
- SKU: IPC1013A | MPN: 502101
-
IPC1011The RB-7 Tube Lock Ring is a replacement retaining ring used in the IPC1000 RotorBlast tube and housing assembly. It locks the RB-6 tube in place inside the RB-15 housing to help prevent tube movement during operation.
- Replacement lock ring for the IPC1000 RotorBlast tube and housing stack
- Secures the RB-6 tube within the RB-15 housing
- Helps maintain correct tube retention during blasting operations
- Use when servicing a loose, worn, or damaged tube retention point
- Confirm assembly condition during replacement (tube seating and housing engagement)
- SKU: IPC1011 | MPN: 502070
IPC1011The RB-7 Tube Lock Ring is a replacement retaining ring used in the IPC1000 RotorBlast tube and housing assembly. It locks the RB-6 tube in place inside the RB-15 housing to help prevent tube movement during operation.
- Replacement lock ring for the IPC1000 RotorBlast tube and housing stack
- Secures the RB-6 tube within the RB-15 housing
- Helps maintain correct tube retention during blasting operations
- Use when servicing a loose, worn, or damaged tube retention point
- Confirm assembly condition during replacement (tube seating and housing engagement)
- SKU: IPC1011 | MPN: 502070
-
IPC1014The RB-12 Washer is a tungsten carbide replacement washer for the IPC1000 RotorBlast rear end assembly. It mounts on the back side of the RB-11 rear end plate and provides a durable wear surface suited for abrasive service conditions.
- Tungsten carbide washer for high-wear rear end plate area
- Located on the back of the RB-11 rear end plate
- Designed for durability in abrasive environments
- OEM replacement part for IPC1000 RotorBlast service
- SKU: IPC1014 | MPN: 502120
IPC1014The RB-12 Washer is a tungsten carbide replacement washer for the IPC1000 RotorBlast rear end assembly. It mounts on the back side of the RB-11 rear end plate and provides a durable wear surface suited for abrasive service conditions.
- Tungsten carbide washer for high-wear rear end plate area
- Located on the back of the RB-11 rear end plate
- Designed for durability in abrasive environments
- OEM replacement part for IPC1000 RotorBlast service
- SKU: IPC1014 | MPN: 502120
Our Blasting & UHP Site Equipment category offers everything you need for efficient and effective surface preparation. For abrasive blasting, we supply a variety of blasting pots, nozzles, and blast hoses that ensure consistent media flow and superior performance. If you’re working with ultra-high-pressure water blasting, our UHP pumps and water jetting accessories are engineered for maximum power and precision, making them ideal for removing coatings, rust, and other heavy contaminants. Whether you’re tackling a large industrial project or a specialized cleaning job, our equipment is designed to meet the highest standards of safety and efficiency. Need assistance? Our team is here to provide expert guidance on selecting the best tools for your needs.