Heavy Duty Sand & Abrasive Blast Nozzles

Sand & Abrasive Blast Nozzles

BlastOne is a leading supplier of sandblast nozzles to industrial blast and paint companies worldwide.  Our team is able to recommend the best type for your application whether you seek long lasting sini silicon nitride nozzles with a tough polyurethane jacket, tungsten carbide lasting 100-250 hours, standard silicon carbide or even alumina.

We also offer our blast nozzles in either contractor, medium, or fine threaded options.  Whether you’re interested in trying a new type or simply replace an old favorite, give BlastOne a call and let us ship one out today.

Showing all 15 results


Even a very small increase in blasting nozzle size will result in a very large increase in ‘air and abrasive consumption’. When a sand blast nozzle has worn 1/16” (2mm) larger, it is time to be replaced. Use an abrasive blast nozzle size analyzer kit to check your nozzle regularly (we recommend at least ONCE PER WEEK). You’ll be surprised how much your production decreases with a worn sand blasting nozzle! Wet blasting & WIN (Water Induction Nozzles) also available


NOTE: Efficiency drops 1.5% for every 1 psi below 100 at the sand blasting nozzle. This means a 14% efficiency drop at 90 psi, 26% efficiency lost at 80 psi and almost half lost at 60 psi. Efficiency goes up as pressure increases. 120 psi improves performance by 30%. Actual efficiency increase/ decrease will vary depending on abrasive type and size, blast nozzle type, size and wear, hose sizes and wear, temperature, moisture content of compressed air, etc. Use a abrasive wet or dry blast nozzle pressure gauge to measure air pressure at the nozzle. Make allowance for increased air consumption due to sandblast nozzle wear, air leaks, breathing airline filter, respirator breathing air and any pneumatic equipment using air from the compressor. A good rule of thumb is to use a compressor twice the capacity of the grit blast nozzle consumption.