Blasting Parts & Consumables
Showing 226–240 of 606 results
-
BABL4425L
- Suits BABL4400 LED Stringer Link-A-Light
- Link-A-Light Stringer Interconnecting Power Cable
- Used to connect individual lights up to each other in a daisy chain fashion, up to 12 in a row, a maximum of 250ft
- 25 ft long cable
- Genuine Parts – Manufactured by Western Technology
BABL4425L- Suits BABL4400 LED Stringer Link-A-Light
- Link-A-Light Stringer Interconnecting Power Cable
- Used to connect individual lights up to each other in a daisy chain fashion, up to 12 in a row, a maximum of 250ft
- 25 ft long cable
- Genuine Parts – Manufactured by Western Technology
-
-
HT4132128
- Suit Trelawny 2B and 2BPG Needle Scalers
- Chisel tip for faster working capabilities
- Sold as a Pack of 6 sets of 28x 3mm needles (168 Needles)
- Genuine Parts - Manufactured by Trelawny
HT4132128- Suit Trelawny 2B and 2BPG Needle Scalers
- Chisel tip for faster working capabilities
- Sold as a Pack of 6 sets of 28x 3mm needles (168 Needles)
- Genuine Parts - Manufactured by Trelawny
-
FMAK3WAY
- Suits 'Chicago' Quick Connect 2-Lug couplings
- 3-Way Splitter Coupling for air hose
- Use this item to split an air line into two lines
- Sold individually
- Genuine NECO part
FMAK3WAY- Suits 'Chicago' Quick Connect 2-Lug couplings
- 3-Way Splitter Coupling for air hose
- Use this item to split an air line into two lines
- Sold individually
- Genuine NECO part
-
Blast hoses must be cut square before attaching a fitting to them. The use of hose cutters like these are recommended as using a saw or other process will not allow the fitting to seat properly, causing premature wear. Replacement blades available. Two sizes available: HFKCT100 for hoses up to 2 3/8" (60mm) OD. HFKCT150 for hoses up to 3" (75mm) OD.
-
AFREGARG30
- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
AFREGARG30- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
-
HFKCT151Refresh your 3" / 75mm hose / plastic pipe cutter with a new blade, available here from Blastone.HFKCT151Refresh your 3" / 75mm hose / plastic pipe cutter with a new blade, available here from Blastone.
-
The genius behind the GX4 is the cartridge system. Following are the features and benefits.
- Sensors currently are available for CO (carbon monoxide), O2 (oxygen) and HS2 (hydrogen sulfide).
- Replacement cartridge come sealed and are factory calibrated for easy in-field installation
- Very easy to replace and prevents having to send your monitor into the factory for calibration. (Calibration checks should be performed regularly.)
- Sensors have up to a 2 year life from date of manufacture (unless prematurely fouled)
- Genuine Parts - Manufactured by GVS / RPB Safety
-
HLNV2025
- 1/4" NPT female threads
- Confidently and quickly connect/disconnect your RPB® respiratory, eye safety and PPE equipment
HLNV2025- 1/4" NPT female threads
- Confidently and quickly connect/disconnect your RPB® respiratory, eye safety and PPE equipment
-
OPBNRK
- 30 Day Money Back Guarantee | Free Returns
- Fits RPB Nylon Blast suits as well as BlasterAlls suits
- Genuine RPB Safety Part
- Price shown is per pair.
OPBNRK- 30 Day Money Back Guarantee | Free Returns
- Fits RPB Nylon Blast suits as well as BlasterAlls suits
- Genuine RPB Safety Part
- Price shown is per pair.
-
HT7051102
- Suits Trelawny Long-Reach Scraper (HT1363597)
- Genuine part – manufactured by Trelawny
- 4” Chisel Blade for removal of soft or brittle coatings
- Sold individually
HT7051102- Suits Trelawny Long-Reach Scraper (HT1363597)
- Genuine part – manufactured by Trelawny
- 4” Chisel Blade for removal of soft or brittle coatings
- Sold individually
-
BAMV4P6
- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
BAMV4P6- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
-
FMCFGP
- Suits FMCF 4-Claw Crowsfoot Couplings
- Check coupling gaskets daily - worn gaskets will leak air
- Keep spares in your toolbox
- Come in a pack of 10
- Genuine NECO parts
FMCFGP- Suits FMCF 4-Claw Crowsfoot Couplings
- Check coupling gaskets daily - worn gaskets will leak air
- Keep spares in your toolbox
- Come in a pack of 10
- Genuine NECO parts
-
BAUT50G
- Used to store water for use when Wet Blasting
- Often used with the MistBlaster and AirPrep Combination Skid
- Holds up to 50 Gallons
- Mist Blaster uses 1 pint of water per minute when blasting. Should support about 6 hours of wet blasting (not in washdown mode)
- Easy to remove lid for refilling
- Sold Individually
- Genuine BlastOne Product
BAUT50G- Used to store water for use when Wet Blasting
- Often used with the MistBlaster and AirPrep Combination Skid
- Holds up to 50 Gallons
- Mist Blaster uses 1 pint of water per minute when blasting. Should support about 6 hours of wet blasting (not in washdown mode)
- Easy to remove lid for refilling
- Sold Individually
- Genuine BlastOne Product
-
BABL4450L
- Suits BABL4400 LED Stringer Link-A-Light
- Link-A-Light Stringer Interconnecting Power Cable
- Used to connect individual lights up to each other in a daisy chain fashion, up to 12 in a row, a maximum of 250ft
- 50 ft long cable
- Genuine Parts – Manufactured by Western Technology
BABL4450L- Suits BABL4400 LED Stringer Link-A-Light
- Link-A-Light Stringer Interconnecting Power Cable
- Used to connect individual lights up to each other in a daisy chain fashion, up to 12 in a row, a maximum of 250ft
- 50 ft long cable
- Genuine Parts – Manufactured by Western Technology
>>> Click to SEARCH <<<
If your unable to locate what you need, Contact Us today!
Navigating our extensive inventory is a breeze, thanks to our user-friendly online shop. With an easy-to-search platform, you can quickly find the exact part you’re looking for, be it for a specific valve, machine, or any other component. And if ever you’re unsure about the right part for your equipment, our exceptional customer service team is always on hand to guide you. With a deep understanding of sandblasting equipment, they will help you pinpoint the exact replacement part you need, ensuring minimal downtime and optimized performance.
In short, for all your sandblasting equipment repair part needs, look no further. From a vast selection of OEM parts, easy online shopping, to unmatched customer service support, we’ve got you covered. Ensure the longevity and efficiency of your equipment by choosing the best in the business.