My Account
Coating Adhesion
There are a number of methods of measuring coating adhesion (for cured paint coatings) depending on the substrate type, thickness, curvature ( for example pipelines) and anticipated adhesion strength. Manual or automatic paint adhesion or coating adhesion measurement is traditionally done with ‘pull off’ type measuring instruments. Such as the Elcometer 106 adhesion tester or the DeFelsko Positest AT Coating Adhesion Test Kits.
Showing all 12 results
-
The PosiTest Cross Hatch Adhesion Test Kit detects coating's ability to resist separation from a substrate when lattice pattern is cut into the coating. The specific kit you need will depend on the thickness of the coating and which standard you are testing to.
- Includes all tools and accessories needed for cross hatch testing
- Comfortable use with ergonomic tool handle and non-slip grip
- Replaceable, 4-sided steel blade
- Ideal for coatings up to 10 mils
- See long description tab for for kit and standard details
ISO 2409 Kits
- 1 mm / 6 Teeth
- 2 mm / 6 Teeth
- 3 mm / 6 Teeth
ASTM D3359 Kits
- 1 mm / 11 Teeth
- 2 mm / 6 Teeth
Each kit includes the following:
- Cross Hatch Tool
- 4-in1 Blade
- Magnifier - 3X (ISO) or 10X (ASTM)
- ISO or ASTM Tape
- Brush
- Scissors
- 3/32" Hex Key
- ISO/ASTM Classification Reference Chart
- Instruction Manual
- Durable Hard Shell Case
- Additional tape and blades are available under the repair parts tab
-
BlastOne carries all DeFelsko inspection tools and supplies. This group shows the following 4-in-1 Replacement Blades for the PosiTest CH Tester:
- Replacement Blade, 1 mm / 6 Teeth, for ISO 2409 Cross Hatch Test
- Replacement Blade, 2 mm / 6 Teeth, for ISO 2409 and ASTM D3359 Cross Hatch Test
- Replacement Blade, 3 mm / 6 Teeth, for ISO 2409 Cross Hatch Test
- Replacement Blade, 1 mm / 11 Teeth, for ASTM D3359 Cross Hatch Test
-
Replacement Tape for Defelsko PosiTest Cross Hatch Adhesion Testers available as follows:
- Tape for ISO 2409 Kit
- 1 inch x 72 yards / roll
- Tape for ASTM D3359 Kit
- 1 inch x 90 yards / roll
Sold by the roll
- Tape for ISO 2409 Kit
-
INYKITC-US
- Recommended for large inspection projects, complex specifications and regular use
- Covers coating thickness, surface profile, climatic conditions and adhesion testing and surface chloride testing
- Items in this kit include:
- PaintGage coating thickness gage - memory model, separate or integral probe with software
- Certified coated thickness standard
- DewCheck electronic climatic gage
- 10 x aluminum wet film combs to 1 to 80 mil (25 to 2032 micron) range
- Magnetic surface thermometer -22°F to +122°F (-30°C to +50°C) range
- Testex surface profile test kit - includes dial thickness gage, 100 Testex tape tests and burnishing tools
- Surface comparators with illuminated magnifier
- Cross hatch adhesion test kit - includes cross hatch cutter and ISO roll of tape
- S20 hazardous area inspection light
- Five x Chlor*Test surface chloride tests
- Retractable inspection mirror
INYKITC-US- Recommended for large inspection projects, complex specifications and regular use
- Covers coating thickness, surface profile, climatic conditions and adhesion testing and surface chloride testing
- Items in this kit include:
- PaintGage coating thickness gage - memory model, separate or integral probe with software
- Certified coated thickness standard
- DewCheck electronic climatic gage
- 10 x aluminum wet film combs to 1 to 80 mil (25 to 2032 micron) range
- Magnetic surface thermometer -22°F to +122°F (-30°C to +50°C) range
- Testex surface profile test kit - includes dial thickness gage, 100 Testex tape tests and burnishing tools
- Surface comparators with illuminated magnifier
- Cross hatch adhesion test kit - includes cross hatch cutter and ISO roll of tape
- S20 hazardous area inspection light
- Five x Chlor*Test surface chloride tests
- Retractable inspection mirror
Part Number Purchase Price INYKITC-US $4,447.23 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$4,447.23
-
-
INE142K
- Dust Tape Test Kit to measure surface dust
- Used in accordance with Standards ISO 8502-3
- Comes with a Sturdy Binder to hold all forms, visual comparator, tape, scissors, and illuminated magnifier
- 10X Illuminated Magnifier
INE142K- Dust Tape Test Kit to measure surface dust
- Used in accordance with Standards ISO 8502-3
- Comes with a Sturdy Binder to hold all forms, visual comparator, tape, scissors, and illuminated magnifier
- 10X Illuminated Magnifier
-
IN700ATA
- Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure at a user-specified rate
- Measure adhesion of coatings to metal, wood, concrete and other substrates
- Stores the maximum reading in memory - this can be viewed at a later date or downloaded for analysis
- Pressure is displayed in psi or MPa - Test Range 0 to 3000 psi (0 to 20 MPa) with a ¾' (20 mm) dolly
- Kit includes
- Adhesion tester with digital display
- 20x ¾' (20 mm) aluminum test dollies
- Abrasive pad and cutting tool Certificate of calibration traceable to NIST
- Two year warranty, carrying case and more
IN700ATA- Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure at a user-specified rate
- Measure adhesion of coatings to metal, wood, concrete and other substrates
- Stores the maximum reading in memory - this can be viewed at a later date or downloaded for analysis
- Pressure is displayed in psi or MPa - Test Range 0 to 3000 psi (0 to 20 MPa) with a ¾' (20 mm) dolly
- Kit includes
- Adhesion tester with digital display
- 20x ¾' (20 mm) aluminum test dollies
- Abrasive pad and cutting tool Certificate of calibration traceable to NIST
- Two year warranty, carrying case and more
-
IN700AT
Introducing the "DeFelsko® PosiTest AT-M Hydraulic Adhesion Tester Kit" (SKU: IN700AT): a heavy-duty hydraulic adhesion tester designed to measure coatings' adhesion on various substrates. Kit includes a digital display, 20 aluminum test dollies, and a two-year warranty.
AVAILABLE FOR RENTAL OR PURCHASE
- Heavy-duty manual hydraulic pump will apply smooth and continuous pressure with a single stroke
- Measure adhesion of coatings to metal, wood, concrete and other substrates
- Stores the maximum reading in memory - this can be viewed at a later date or downloaded for analysis
- Pressure is displayed in psi or MPa - Test Range 0 to 3000 psi (0 to 20 MPa) with a ¾' (20 mm) dolly
- Kit includes
- Adhesion tester with digital display
- 20x ¾' (20 mm) aluminum test dollies
- Abrasive pad and cutting tool Certificate of calibration traceable to NIST
- Two year warranty, carrying case and more
IN700ATIntroducing the "DeFelsko® PosiTest AT-M Hydraulic Adhesion Tester Kit" (SKU: IN700AT): a heavy-duty hydraulic adhesion tester designed to measure coatings' adhesion on various substrates. Kit includes a digital display, 20 aluminum test dollies, and a two-year warranty.
AVAILABLE FOR RENTAL OR PURCHASE
- Heavy-duty manual hydraulic pump will apply smooth and continuous pressure with a single stroke
- Measure adhesion of coatings to metal, wood, concrete and other substrates
- Stores the maximum reading in memory - this can be viewed at a later date or downloaded for analysis
- Pressure is displayed in psi or MPa - Test Range 0 to 3000 psi (0 to 20 MPa) with a ¾' (20 mm) dolly
- Kit includes
- Adhesion tester with digital display
- 20x ¾' (20 mm) aluminum test dollies
- Abrasive pad and cutting tool Certificate of calibration traceable to NIST
- Two year warranty, carrying case and more
-
INF1061
- Destructive pull-off adhesion test
- Applications include paint or plasma spray on bridge decking, coatings on steel, aluminum, concrete, etc.
- Uses standard test dolly
- Used in accordance with ISO4624, AS1580-408-5 Standards
- Kit supplied with unit body, base support ring, 20 dollies, pack of Araldite adhesive, magnetic dolly clamp, dolly cutter, instructions, carry case
INF1061- Destructive pull-off adhesion test
- Applications include paint or plasma spray on bridge decking, coatings on steel, aluminum, concrete, etc.
- Uses standard test dolly
- Used in accordance with ISO4624, AS1580-408-5 Standards
- Kit supplied with unit body, base support ring, 20 dollies, pack of Araldite adhesive, magnetic dolly clamp, dolly cutter, instructions, carry case
-
Loading fixtures, stubs for adhesion testing.
- Sizes from 10mm-50mm
- Metal adhesion tests typically use 10, 14, and 20mm dollies
- Concrete adhesion tester accessory kits use 50mm dollies
- Order glue separately, available here
For use with PosiTest AT equipment.
-
IN700ADK
- ResinLab EP1 1HT 2-Part Epoxy with additional glue, mixing sticks, palettes and cotton swabs
- Approximate Epoxy Yield*
- 10mm: ~400 dollies
- 14mm: - 200 dollies
- 20mm: - 100 dollies
- 50mm: - 16 dollies
*Actual results will vary based on amount of epoxy used per dolly and waste.
- Manufacturer part# ATADHESIVEKIT
- Made in the USA
IN700ADK- ResinLab EP1 1HT 2-Part Epoxy with additional glue, mixing sticks, palettes and cotton swabs
- Approximate Epoxy Yield*
- 10mm: ~400 dollies
- 14mm: - 200 dollies
- 20mm: - 100 dollies
- 50mm: - 16 dollies
*Actual results will vary based on amount of epoxy used per dolly and waste.
- Manufacturer part# ATADHESIVEKIT
- Made in the USA
-
INDCHDTMAG10X
Use for visual assessment of scratch and gouge marks.
INDCHDTMAG10XUse for visual assessment of scratch and gouge marks.
Part Number Purchase Price INDCHDTMAG10X $33.33 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$33.33
-
-
IND6000PRINT
- Receives data from Advanced models
- No mess, ink-free thermal paper
- Small footprint for portability
- Fast print speed of 6mm/s
- Utilizes bluetooth wireless technology
- Universal AC adaptor and rechargeable lithium ion battery included
- One-year warranty
- Manufacturer part# PRINTERBT
- Made in the USA
IND6000PRINT- Receives data from Advanced models
- No mess, ink-free thermal paper
- Small footprint for portability
- Fast print speed of 6mm/s
- Utilizes bluetooth wireless technology
- Universal AC adaptor and rechargeable lithium ion battery included
- One-year warranty
- Manufacturer part# PRINTERBT
- Made in the USA
Part Number Purchase Price IND6000PRINT $335.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$335.00
-
BlastOne sells DeFelsko products who are the leading manufacturer of Adhesion Testing Equipment in the world. If you have any requirements for testing your coating adhesion – reach out to BlastOne for a Defelsko Test Kit today
