My Account
Spray Hoods
It is recommended that all spray painters use respiratory and skin protection. This is especially necessary when using pain coatings which contain hazardous ingredients, paint thinners, isocyanates etc. BlastOne supplies are complete selection of half mask and full-face respirators for painting applications. This includes PAPR supplied air respirators. Good quality personal protective equipment, including, gloves, painteralls, disposable overalls, goggles – are recommended for all industrial spraying applications and contractors.
Showing all 10 results
-
Advanced Respiratory Protection for Coatings Applications
- Loose-fitting Design offers the following advantages:
- No Fit-Testing Required
- Facial hair is OK
- Much more protection for respiratory hazards than close-fitting masks. These hoods have an APF (Assigned Protection Factor) of 1000+, compared to a typical N95 mask rating of 10.
- Comfortable, safe, and flexible - great investment for worker retention!
- Loose-fitting Design offers the following advantages:
-
- Soft Comfortable Calico fabric Paint hood
- Keeps the dust and overspray out of your hair and neck
- Low cost, disposable design
- Elastic face opening
- Sold as a pack of 10 hoods
- Soft Comfortable Calico fabric Paint hood
- Keeps the dust and overspray out of your hair and neck
- Low cost, disposable design
- Elastic face opening
- Sold as a pack of 10 hoods
-
- Comfortable elastic stretch fabric designed for Painters and Blasters
- Can be worn three ways (over nose, under nose, under chin)
- Close fitting design, ideal for wearing underneath a blast helmet or spray hood
- Helps keep the blast helmet more hygienic, buy capturing body sweet
- Sold as a pack of 10 hoods
- Genuine Products - Manufactured by RPB Safety
- Comfortable elastic stretch fabric designed for Painters and Blasters
- Can be worn three ways (over nose, under nose, under chin)
- Close fitting design, ideal for wearing underneath a blast helmet or spray hood
- Helps keep the blast helmet more hygienic, buy capturing body sweet
- Sold as a pack of 10 hoods
- Genuine Products - Manufactured by RPB Safety
-
- GVS Half Mask are some of the worlds most comfortable masks
- Extremely lightweight mask that adapt perfectly to the face, without hindering the user
- Snug-Fit™ design provides an enhanced comfort to the breather
- The P100 dust filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns
- Long lasting cartridges due to high carbon material
- The high breathing flowrate design uses pleated filters to reduce the risk of user fatigue
- GVS masks are hypoallergenic, made from scent-free, medical grade materials, which are free from latex and silicone, and come with an easy to adjust head band
- Filters are installed and mask comes ready to use
- NIOSH Approved TC-84A-8062
-
- This is not officially a full face mask, but is a half mask with goggles.
- 2 filter options available: Standard pleated filters or filters with activated carbon to remove nuisance odor
- Snug-Fit™ design provides an enhanced comfort to the breather.
- Provides the operator full eye and respiratory tract protection
- P100 filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns
- Pleated Filters have more surface area and outlast other styles many times.
- Eye shield is anti-mist and anti-scratch
- Filters are installed and mask comes ready to use
- Sold individually
- NIOSH Approved TC-84A-8062
-
- This is not officially a full face mask, but is a half mask with goggles.
- 2 filter options available: OV (Organic Vapor) or OV (Organic Vapor) / AG (Acid Gas)
- Snug-Fit™ design provides an enhanced comfort to the breather.
- Provides the operator full eye and respiratory tract protection
- P100 filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns
- Pleated Filters have more surface area and outlast other styles many times.
- Eye shield is anti-mist and anti-scratch
- Filters are installed and mask comes ready to use
- Sold individually
- NIOSH Approved TC-84A-8062
-
- GVS Half Mask are some of the worlds most comfortable masks
- Extremely lightweight mask that adapt perfectly to the face, without hindering the user
- Snug-Fit™ design provides an enhanced comfort to the breather
- The P100 dust filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns
- Long lasting cartridges due to high carbon material
- The high breathing flowrate design uses pleated filters to reduce the risk of user fatigue
- GVS masks are hypoallergenic, made from scent-free, medical grade materials, which are free from latex and silicone, and come with an easy to adjust head band
- Filters are installed and mask comes ready to use
- NIOSH Approved TC-84A-8062
-
- GVS Half Mask are some of the worlds most comfortable masks
- Extremely lightweight mask that adapt perfectly to the face, without hindering the user
- Snug-Fit™ design provides an enhanced comfort to the breather
- P100 filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns
- Long lasting cartridges due to high carbon material
- The high breathing flowrate design uses pleated filters to reduce the risk of user fatigue
- GVS masks are hypoallergenic, made from scent-free, medical grade materials, which are free from latex and silicone, and come with an easy to adjust head band
- Filters are installed and mask comes ready to use
- NIOSH Approved TC-84A-8062
-
- Hard Carry Case for Elipse and Integra Face Masks
- Extend the capability of your protection with the best range of accessories
- Carry case protects your mask from germs and outside contaminants
- 3 different sizes available to suit your specific mask
- Cases sold individually
- Manufactured by GVS in USA.
-
- Suit RPB T100 & RPB T-Link spray hoods
- Replacement peel off lenses allow the painter to peal off a lense when one gets cloudy and keep painting.
- Saves up to 25minutes of down-time per day.
- Sold as a pack of 50
- Genuine Parts - Manufactured by RPB Safety
- Suit RPB T100 & RPB T-Link spray hoods
- Replacement peel off lenses allow the painter to peal off a lense when one gets cloudy and keep painting.
- Saves up to 25minutes of down-time per day.
- Sold as a pack of 50
- Genuine Parts - Manufactured by RPB Safety
