Deadman Controls
Abrasive Blasting Equipment Deadman Control Systems & Remote Control Systems (RCS Systems) for safe operation of sand blast pots
Sandblaster safety is paramount for any blasting operation and on every jobsite. BlastOne offers both pneumatic and electric remote control handles and accessories to give operators the control necessary to keep themselves safe and maintain control over the blasting system.
Check out out our line of Deadman Control Handles and equipment.
Showing all 39 results
-
- 2-pin Twistlok plug
- For use with Clemco remote control systems only
- 2-pin Twistlok plug
- For use with Clemco remote control systems only
-
-
- Combines inlet and exhaust valve blast pot functions
- Pneumatic Deadman Signal lines connect directly to combo valve
- Full-ported, 1 -¼ (32 mm) thread, inlet side
- Pneumatic operation requires 60psi to close exhaust valve
- Rugged, compact design
- Simple to install and service
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
- Combines inlet and exhaust valve blast pot functions
- Pneumatic Deadman Signal lines connect directly to combo valve
- Full-ported, 1 -¼ (32 mm) thread, inlet side
- Pneumatic operation requires 60psi to close exhaust valve
- Rugged, compact design
- Simple to install and service
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
-
- Deadman-operated control valve (solenoid)
- Uses an electric or pneumatic charge to push over the shuttle which opens ports to control the deadman system
- Provides sharp, clean and rapid response
- Improves safety
- Installs between twinline and inlet valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
-
AVAILABLE FOR RENTAL OR PURCHASE
- #1 Deadman in the industry
- Larger internal ports make it faster acting, making it a safer handle
- Compact, slimline design - 30% easier then other handles to hold down
- Simple to make in-field repairs as required
- Available as Electric or Pneumatic
- Geniune Products - Manufactured by Schmidt / Axxiom Manufacturing
-
- Tried and proven deadman controls now available in a trigger style option
- Reduces strain on the operator
- Great for smaller nozzles #3 to #6
- Available as electric or pneumatic deadman controls
- Sold Individually
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
- Conventional, bleeder-style handle – do not use with Combo or Thompson valves
- RCC Aluminum "Bleeder" pneumatic remote control handle
- Large-lever design
- ¼" (6 mm) (supply) x ⅛" (3 mm) (return) threaded connectors
- Recommended upgrade to a non-breather deadman handle
- Genuine Parts - Manufactured by Clemco
- Conventional, bleeder-style handle – do not use with Combo or Thompson valves
- RCC Aluminum "Bleeder" pneumatic remote control handle
- Large-lever design
- ¼" (6 mm) (supply) x ⅛" (3 mm) (return) threaded connectors
- Recommended upgrade to a non-breather deadman handle
- Genuine Parts - Manufactured by Clemco
-
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
-
- Pneumatically operated via twinline hoses
- Industry equivalent models: Axxiom Schmidt - 2263001
- Compatible with all twinline pneumatic remote control systems
- 1/4" (6mm) air supply threaded connector
- Operate by pulling down the safety flap and hold the large handle down
- 1/4" (6mm) air supply threaded connector
- Pneumatically operated via twinline hoses
- Industry equivalent models: Axxiom Schmidt - 2263001
- Compatible with all twinline pneumatic remote control systems
- 1/4" (6mm) air supply threaded connector
- Operate by pulling down the safety flap and hold the large handle down
- 1/4" (6mm) air supply threaded connector
-
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
-
- Ball and chain not included - operator must use as per instruction manual
- 12 Volt or 24 Volt electric operation
- 2-wire is standard or 3-position toggle switch for use with integrated remote abrasive cut-off switch
- Order TwistLok plug and/or extension cable separately
- Genuine Parts - Manufactured by Western Technology
-
- Compatible with Pressure hold Blast Pots, often called Thompson Valve or Tera Valve Blast Pots
- Controls the air supply to the pusher line on the blast pot
- Rugged, compact design
- Low pressure drop across valve increases production
- Commonly referred to as - "Gatekeeper" and "AAV"
- BlastOne Highly recommend you upgrade to a high-flow valve, as it reduces pressure loss
- Sold Individually, size according to your pusherline size
-
- Differential pressure-style remote controls
- 1-1/2" (38mm) thread inlet valve
- 1" (25mm) thread abrasive trap
- 1" (25mm) thread exhaust valve
- Service repair kit (not pictured) includes all necessary seals, gaskets, o-rings, springs, plug washer retainer, screen, etc.
-
- European-style remote controls
- 1-1/4" (32mm) thread inlet valve
- 3/4" (19mm) thread ported exhaust valve
- Available as an integrated inlet/exhaust assembly
- Supplied standard as separate valves for simplified installation and ease of maintenance
- Service repair kit includes seals, gaskets, etc. to service both the inlet and exhaust valve
- Optional service kit #2 also includes exhaust deflector plate and gasket
- Recommended replacement is the Combo Valve System- DM2223RK00
-
-
- Piston-operated valve
- 1/4" female NPT supply air connection
- Effortless activation via deadman control handle
- Guide tubes ensure consistent plunger travel
- Eliminate repressurization down time profit loss
- Piston-operated valve
- 1/4" female NPT supply air connection
- Effortless activation via deadman control handle
- Guide tubes ensure consistent plunger travel
- Eliminate repressurization down time profit loss
-
-
- Service repair kit includes all necessary seals, gaskets, o-rings, springs, plug washer retainer, screen, etc.
- Service repair kit includes all necessary seals, gaskets, o-rings, springs, plug washer retainer, screen, etc.
-
- Service repair kit includes all necessary seals, gaskets, o-rings, springs, plug washer retainer, screen, etc.
- Service repair kit includes all necessary seals, gaskets, o-rings, springs, plug washer retainer, screen, etc.
-
BALL AND CHAIN SOLD SEPARATELY
- Increases productivity and reduces costs
- Permanently sealed pneumatic switch is protected by abrasion-resistant urethane
BALL AND CHAIN SOLD SEPARATELY- Increases productivity and reduces costs
- Permanently sealed pneumatic switch is protected by abrasion-resistant urethane
-
-
- Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valve
-
- Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valve
-
-
- 1"
- Protects blast pot exhaust valve
- Effectively captures abrasive media captured pulled into the flow of air during the depressurization process
- 1"
- Protects blast pot exhaust valve
- Effectively captures abrasive media captured pulled into the flow of air during the depressurization process
-
- Optional service repair kit also includes exhaust deflector plate and gasket
- Optional service repair kit also includes exhaust deflector plate and gasket
-
- Pre-coupled with female swivel joiners - no assembly required
- 3/16" I.D., 50' length hose, suits Clemco equipment
- Connects deadman control trigger with the valves installed on blast pot
- Yel/Yel w/ Black stripe
- Pre-coupled with female swivel joiners - no assembly required
- 3/16" I.D., 50' length hose, suits Clemco equipment
- Connects deadman control trigger with the valves installed on blast pot
- Yel/Yel w/ Black stripe
-
- Conversion kit for DM2229100 Electric Control Valve
- Installs between twinline and inlet valve
- Provides sharp, clean and rapid deadman response
- Improves safety
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
- Conversion kit for DM2229100 Electric Control Valve
- Installs between twinline and inlet valve
- Provides sharp, clean and rapid deadman response
- Improves safety
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
-
- Used to convert Pneumatic Blast Pots over to Electric Deadman Systems
- Electric Deadman should be used on any set ups running over 100ft of blast hose
- Sold as a Conversion Kits including;
- Connector Box
- 16 feet battery cable with alligator clips
- Response electric remote control handle
- 55 feet deadman cable
- TwistLok plug connector
- Energy consumption rate of 8 watts per control valve
- Assembled by Qualified BlastOne Technicians
-
AVAILABLE FOR RENTAL OR PURCHASE
- Abrasion-resistant, flex-coated control cable
- 12 Volt rated for electric deadman controls
- 3-Pin Twistlock connectors used for all deadman cables
- 2-wire is used for Battery connections only
- Optional heavy duty cable for use with steel grit or other high wear areas
- Please Request Rental Pricing
-
AVAILABLE FOR RENTAL OR PURCHASE
- Bonded, heavy duty, twin rubber hose, color coded for safety
- Used to supply air to the deadman handle which is used to signal a "blast" return charge of air to the blast pot control valves
- Always replace the hose at the first sign of wear, this is a safety deadman control item.
- Fitted standard with male-female threaded connectors
- 1/4" (6 mm) connectors on 'supply' red hose
- 1/8" (3 mm) connectors on 'return' green hose
- 55 ft length
- Please Request Rental Pricing
AVAILABLE FOR RENTAL OR PURCHASE- Bonded, heavy duty, twin rubber hose, color coded for safety
- Used to supply air to the deadman handle which is used to signal a "blast" return charge of air to the blast pot control valves
- Always replace the hose at the first sign of wear, this is a safety deadman control item.
- Fitted standard with male-female threaded connectors
- 1/4" (6 mm) connectors on 'supply' red hose
- 1/8" (3 mm) connectors on 'return' green hose
- 55 ft length
- Please Request Rental Pricing
-
- Hi-flow Blast Pot Pusherline Kit
- Used on Blast Pots between the air control valves and the metering valve
- Sold as a complete assembly Including
- Pusherline Air Hose
- 1-¼" ball valve
- 1-¼" Nut and tails with bolt style clamps for in-field installation
- Does not include Metering Valve
-
- 24 ft cable with alligator clips
- Connects directly to a battery to supply 12 volt power for deadman controls
- Deadman cable is fitted with a 2-Pin TwistLok plug connector for connecting to Deadman controls on the blast pot
- 24 ft cable with alligator clips
- Connects directly to a battery to supply 12 volt power for deadman controls
- Deadman cable is fitted with a 2-Pin TwistLok plug connector for connecting to Deadman controls on the blast pot
-
- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
- Kit is designed to replace the Dual inlet/outlet valve systems
- Retrofit Kit includes:
- 1 -¼ (32 mm) ComboValve™ with blowdown hose
- Pneumatic Response deadman control handle and twinline hose
- All fittings needed
- Note: Does not include the Pusher Line Kit or MicroValve - order separately
- Kit is designed to replace the Dual inlet/outlet valve systems
- Retrofit Kit includes:
- 1 -¼ (32 mm) ComboValve™ with blowdown hose
- Pneumatic Response deadman control handle and twinline hose
- All fittings needed
- Note: Does not include the Pusher Line Kit or MicroValve - order separately
-
- Pneumatic Complete Retrofit kit includes:
- Triple-line coupled remote control hose
- Control hose connections for air supply
- Auto air valve and Thompson Valve II metering valve
- Pneumatic push-pull abrasive on-off switch
- Response deadman handle
- Pneumatic Complete Retrofit kit includes:
- Triple-line coupled remote control hose
- Control hose connections for air supply
- Auto air valve and Thompson Valve II metering valve
- Pneumatic push-pull abrasive on-off switch
- Response deadman handle
-
- Keeps Abrasive grit and dust out of the controls of your blast pot
- Helps maintain valve response and speed
- Extends valve seal life
- Must have essential for any blast pot.
- Easy to maintain and clean
- Uses a 90 micron bronze element
- 1/4" inlet fittings
- Keeps Abrasive grit and dust out of the controls of your blast pot
- Helps maintain valve response and speed
- Extends valve seal life
- Must have essential for any blast pot.
- Easy to maintain and clean
- Uses a 90 micron bronze element
- 1/4" inlet fittings
-
- Compatible with a wide range of blast pots
- Digital display of actual blasting time for individual blast outlets
- Allows you to determine productivity, production rates, assisting project costings, job estimates and scheduling maintenance for common wear items
- System available to run off pneumatic and electric deadman controls
- Triggered instantly by the deadman signal, so you get actual blasting hours
- Options available for single and multiple outlets.
-
- Service Kit for 3-wire Sure-Fire™ Electric Deadman Handle
- Sold as a Kit which Includes:
- Switch
- Boot
- Jumper
- 4‘ wire
- Genuine Parts - Manufactured by Western Technology
- Service Kit for 3-wire Sure-Fire™ Electric Deadman Handle
- Sold as a Kit which Includes:
- Switch
- Boot
- Jumper
- 4‘ wire
- Genuine Parts - Manufactured by Western Technology
-
- Compatible with 1 1/4" (32mm) Combo Valve
- Included within service kit DM222300099
- Compatible with 1 1/4" (32mm) Combo Valve
- Included within service kit DM222300099
-
- Includes all necessary components for building an electric abrasive cut-off switch
- Sold individually
- Includes all necessary components for building an electric abrasive cut-off switch
- Sold individually
-
- 3-pin Quick connector
- 'TwistLok' action designed to prevent cables from accidentally disconnecting
- Panel mount available DM ECK100
- 3 Pin Twistlok are most commonly used for deadman cable
- 2 Pin Twistlok commonly used for Electric Power Supply
- Sold Individually